The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Mechanical properties of particulate filled polymers
Abstract
The mechanical properties of several types of inorganic fillers were investigated in a number of different thermoplastic polymers. The fillers included minerals, such as talc and silicon carbide, and metals, such as aluminum flake and stainless steel fibers. The polymers included General Electric's Noryl, acrylonitrile‐butadiene‐styrene terpolymer, polypropylene, and modified polypropylene. The talc and some of the aluminum flake were treated with coupling agents to improve interfacial adhesion to the polymers. The results showed that the modulus of the filled polymers was a function only of the concentration of filler used up to 40 volume percent filler. The tensile strength of the filled compositions depended very strongly on the degree of interfacial bond developed between the polymer and the filler. The interfacial bond strength depended on the effectiveness of the coupling agents and the inherent wetting ability of the polymer. Of the polymers investigated in this study, Noryl showed the greatest degree of inherent wetting to inorganic fillers. Chemical modification of polypropylene also resulted in greater adhesion to fillers. The impact strength of filled compounds had an even more complex response, because, in addition to the concentration of the filler, and strength of the polymerfiller interface, it depends on the mechanism of crack propagation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Eine neue Bestimmung der Moleküldimensionen
Einstein, A. (1906) · Annalen der Physik · doi:10.1002/andp.19063240204 · Cited by 4,525
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786
The viscosity of a concentrated suspension of spherical particles
Mooney, M. (1951) · Journal of Colloid Science · doi:10.1016/0095-8522(51)90036-0 · Cited by 1,725
Mechanical properties of polymers and composites
Moore, D. R. (1975) · Polymer · doi:10.1016/0032-3861(75)90022-1 · Cited by 1,477
Thomas, D. G. (1965) · Journal of Colloid Science · doi:10.1016/0095-8522(65)90016-4 · Cited by 1,154
Manson, J. A., & Sperling, L. H. (1976) · Springer eBooks · doi:10.1007/978-1-4615-1761-0 · Cited by 1,003
On the viscosity of a concentrated suspension of solid spheres
Frankel, N. A., & Acrivos, A. (1967) · Chemical Engineering Science · doi:10.1016/0009-2509(67)80149-0 · Cited by 731
Advances in astronautical sciences
O'Leary, B. (1983) · Icarus · doi:10.1016/0019-1035(83)90090-8 · Cited by 597
Quemada, D. (1977) · Rheologica Acta · doi:10.1007/bf01516932 · Cited by 565
Limiting Law of the Reinforcement of Rubber
Smallwood, H. M. (1944) · Journal of Applied Physics · doi:10.1063/1.1707385 · Cited by 555
Cited by
Fu, S.-Y., Feng, X.-Q., Lauke, B., & Mai, Y.-W. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2008.01.002 · Cited by 3,549
Wu, W., Geng, P., Li, G., Zhao, D., Zhang, H., & Zhao, J. (2015) · Materials · doi:10.3390/ma8095271 · Cited by 881
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
Nikzad, M., Masood, S. H., & Sbarski, I. (2011) · Materials & Design · doi:10.1016/j.matdes.2011.01.056 · Cited by 503
Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2019.03.016 · Cited by 458
Polymer micro and nanocomposites: Structure, interactions, properties
Móczó, J., & Pukánszky, B. (2008) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2008.06.011 · Cited by 314
Recent Advances in Stretchable and Transparent Electronic Materials
McCoul, D., Hu, W., Gao, M., Mehta, V., & Pei, Q. (2016) · Advanced Electronic Materials · doi:10.1002/aelm.201500407 · Cited by 293
Fused filament fabrication of peek: A review of process-structure-property relationships
Zanjanijam, A. R., Major, I., Lyons, J. G., Lafont, U., & Devine, D. M. (2020) · Polymers · doi:10.3390/polym12081665 · Cited by 240
Metadata
- Authors
- Bigg, D. M.
- Venue
- Polymer Composites
- Publisher
- Wiley
- Published
- 1987-04
- Volume
- 8
- Issue
- 2
- Pages
- 115-122
- ISSN
- 0272-8397 (ISSN-L)
- 1548-0569
- OpenAlex
- W2165319368
- Cited by
- 305
- References
- 10
- FWCI
- 4.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.