The DOI matches its Crossref record; 17 of the 17 references it cites were found in a registry or an index.
Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK
Abstract
Abstract Polyetheretherketone (PEEK) is an engineering thermoplastic with good biocompatibility and excellent mechanical properties. More importantly, PEEK is a promising biomaterial that could potentially be used to replace traditional metal or ceramic parts for biomedical and aerospace applications. Compared to other processing technologies for manufacturing PEEK parts, fused deposition modeling (FDM) has numerous advantages for forming functional parts of complex structures. However, a number of challenges still exist in successfully realizing FDM of PEEK owing to its high melting temperature and high viscosity. In this paper, the FDM method was applied to achieve 3D printing of PEEK. For the first time, finite element analysis (FEA) was used to simulate the melting conditions and fluidity of PEEK in a flow channel, in order to determine the parameters required to 3D print PEEK parts with sufficient surface quality and improved mechanical properties. The simulation results were further analyzed to instruct the design of future printing systems and optimize the printing parameters. In addition, several FDM experiments were performed to study the effects of various printing parameters, including the printing temperature, printing speed, and printing layer thickness, on the mechanical properties, microstructure, and surface quality of printed PEEK parts. The results suggest that using a higher heating temperature of 440 °C, a printing speed of 20 mm/s, and a small printing layer thickness of 0.1 mm can improve the density of PEEK parts, reduce internal defects, strengthen binding between 3D printed layers and infill filaments, and reduce surface roughness. All of these efforts will contribute to the development of improved 3D printing technologies for PEEK.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
PEEK biomaterials in trauma, orthopedic, and spinal implants
Kurtz, S. M., & Devine, J. N. (2007) · Biomaterials · doi:10.1016/j.biomaterials.2007.07.013 · Cited by 2,388
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Tymrak, B. M., Kreiger, M., & Pearce, J. M. (2014) · Materials & Design · doi:10.1016/j.matdes.2014.02.038 · Cited by 1,244
Yang, C., Tian, X., Li, D., Cao, Y., Zhao, F., & Shi, C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.04.027 · Cited by 662
Tan, K. H., Chua, C. K., Leong, K. F., Cheah, C. M., Cheang, P., Abu Bakar, M. S., & Cha, S. W. (2003) · Biomaterials · doi:10.1016/s0142-9612(03)00131-5 · Cited by 625
Rae, P., Brown, E., & Orler, E. B. (2006) · Polymer · doi:10.1016/j.polymer.2006.11.032 · Cited by 399
The rapid prototyping technologies
Upcraft, S., & Fletcher, R. (2003) · Assembly Automation · doi:10.1108/01445150310698634 · Cited by 367
Selective Laser Sintering of PEEK
Schmidt, M., Pohle, D., & Rechtenwald, T. (2007) · CIRP Annals · doi:10.1016/j.cirp.2007.05.097 · Cited by 305
Mechanical properties of particulate filled polymers
Bigg, D. M. (1987) · Polymer Composites · doi:10.1002/pc.750080208 · Cited by 305
Mechanical impact behavior of polyether–ether–ketone (PEEK)
Garcia-Gonzalez, D., Rusinek, A., Jankowiak, T., & Arias, A. (2015) · Composite Structures · doi:10.1016/j.compstruct.2014.12.061 · Cited by 244
Cited by
Fused deposition modelling: Current status, methodology, applications and future prospects
Cano-Vicent, A., Tambuwala, M. M., Hassan, S. S., Barh, D., Aljabali, A. A. A., Birkett, M., Arjunan, A., & Serrano-Aroca, Á. (2021) · Additive Manufacturing · doi:10.1016/j.addma.2021.102378 · Cited by 509
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Fused deposition modeling: process, materials, parameters, properties, and applications
Rajan, K., Samykano, M., Kadirgama, K., Harun, W. S. W., & Rahman, M. M. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-08860-7 · Cited by 426
WANG, P., ZOU, B., DING, S., LI, L., & HUANG, C. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.05.040 · Cited by 365
Self-citationWang, P., Zou, B., Ding, S., Huang, C., Shi, Z., Ma, Y., & Yao, P. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108175 · Cited by 357
Self-citation
Metadata
- Authors
- Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C.
- Venue
- Journal of Materials Processing Technology
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 271
- Pages
- 62-74
- ISSN
- 0924-0136 (ISSN-L)
- OpenAlex
- W2924779837
- Cited by
- 458
- References
- 17
- FWCI
- 18.66
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK. https://app.cochat.ai/papers/10.1016/j.jmatprotec.2019.03.016
- The paper
- Wang, P., Zou, B., Xiao, H., Ding, S., & Huang, C. (2019). Effects of printing parameters of fused deposition modeling on mechanical properties, surface quality, and microstructure of PEEK. Journal of Materials Processing Technology. https://doi.org/10.1016/j.jmatprotec.2019.03.016
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.