The DOI matches its Crossref record; 19 of the 19 references it cites were found in a registry or an index.
Processing and characterization of microcellular foamed high‐density polythylene/isotactic polypropylene blends
Abstract
In this paper, a study on the batch processing and characterization of microcellular foamed high‐density polyethylene (HDPE/iPP) blends is reported. A microcellular plastic is a foamed polymer with a cell density greater than 10 9 cells/cm 3 and fully grown cells smaller than 10 µm. Recent studies have shown that the morphology and crystallinity of semicrystalline polymers have a great influence on the solubility and diffusivity of the blowing agent and on the cellular structure of the resulting foam in microcellular batch processing. In this research, blends of HDPE and iPP were used to produce materials with variety of crystalline and phase morphologies to enhance the subsequent microcellular foaming. It was possible to produce much finer and more uniform foams with the blends than with neat HDPE and iPP. Moreover, the mechanical properties and in particular the impact strength of the blends were significantly improved by foaming.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of polymer chemistry
(1995) · Choice Reviews Online · doi:10.5860/choice.33-2140 · Cited by 15,218
Mechanical Properties of Polymers and Composites
Landel, R. F., & Nielsen, L. E. (1993) · CRC Press eBooks · doi:10.1201/b16929 · Cited by 3,666
Polymer Interface and Adhesion
Wu, S. (2017) · Routledge eBooks · doi:10.1201/9780203742860 · Cited by 3,379
Principles of polymer chemistry
Oster, G. (1954) · Journal of Chemical Education · doi:10.1021/ed031p669.2 · Cited by 2,503
Polymer alloys and blends: Thermodynamics and rheology
Higgins, J. S. (1990) · Polymer · doi:10.1016/0032-3861(90)90099-k · Cited by 680
A study of equilibrium melting of polyethylene
Wunderlich, B., & Czornyj, G. (1977) · Macromolecules · doi:10.1021/ma60059a006 · Cited by 518
Chain structure, phase morphology, and toughness relationships in polymers and blends
Wu, S. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301302 · Cited by 453
Park, C. B., Baldwin, D. F., & Suh, N. P. (1995) · Polymer Engineering & Science · doi:10.1002/pen.760350509 · Cited by 427
Self-citationExperimental methods in polymer chemistry
C.P. (1981) · Journal of Molecular Structure · doi:10.1016/0022-2860(81)80025-7 · Cited by 406
Regime III crystallization in polypropylene
Clark, E. J., & Hoffman, J. D. (1984) · Macromolecules · doi:10.1021/ma00134a058 · Cited by 343
Martuscelli, E. (1984) · Polymer Engineering & Science · doi:10.1002/pen.760240809 · Cited by 232
Baldwin, D. F., Park, C. B., & Suh, N. P. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10538 · Cited by 220
Self-citationTensile properties and morphology of blends of polyethylene and polypropylene
Lovinger, A. J., & Williams, M. L. (1980) · Journal of Applied Polymer Science · doi:10.1002/app.1980.070250817 · Cited by 208
Processing and cell morphology relationships for microcellular foamed PVC/wood‐fiber composites
Matuana, L. M., Park, C. B., & Balatinecz, J. J. (1997) · Polymer Engineering & Science · doi:10.1002/pen.11758 · Cited by 205
Self-citationDifferential scanning calorimetry of polymers : physics, chemistry, analysis, technology
Bershtein, V. A., & Egorov, V. M. (1994) · Ellis Horwood eBooks · Cited by 200
Modeling of transport of small molecules in polymer blends: Application of effective medium theory
Sax, J., & Ottino, J. M. (1983) · Polymer Engineering & Science · doi:10.1002/pen.760230310 · Cited by 197
A review of polyethylene–polypropylene blends and their compatibilization
Teh, J. W., Rudin, A., & Keung, J. C. (1994) · Advances in Polymer Technology · doi:10.1002/adv.1994.060130101 · Cited by 196
Addendum to the thermal properties of polypropylene
Bu, H. S., Cheng, S. Z. D., & Wunderlich, B. (1988) · Die Makromolekulare Chemie Rapid Communications · doi:10.1002/marc.1988.030090205 · Cited by 152
Spherulite nucleation in blends of isotactic polypropylene with high-density polyethylene
Bartczak, Z., Gałęski, A., & Pracellà, M. (1986) · Polymer · doi:10.1016/0032-3861(86)90239-9 · Cited by 120
Cited by
A Review of CO2 Applications in the Processing of Polymers
Tomasko, D. L., Li, H., Liu, D., Han, X., Wingert, M. J., Lee, L. J., & Koelling, K. W. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie030199z · Cited by 686
Sauceau, M., Fages, J., Common, A., Nikitine, C., & Rodier, E. (2011) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.12.004 · Cited by 449
Metadata
- Authors
- Doroudiani, S., Park, C. B., & Kortschot, M. T.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1998-07
- Volume
- 38
- Issue
- 7
- Pages
- 1205-1215
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2131325527
- Cited by
- 252
- References
- 19
- FWCI
- 4.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.