The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Tensile modulus of polymer nanocomposites
Abstract
Based on Takayanagi's two‐phase model, a three‐phase model including the matrix, interfacial region, and fillers is proposed to calculate the tensile modulus of polymer nanocomposites (E c). In this model, fillers (sphere‐, cylinder‐ or plateshape) are randomly distributed in a matrix. If the particulate size is in the range of nanometers, the interfacial region will play an important role in the modulus of the composites. Important system parameters include the dispersed particle size (t), shape, thickness of the interfacial region (τ), particulate‐to‐matrix modulus ratio (E d/E m), and a parameter (k) describing a linear gradient change in modulus between the matrix and the surface of particle on the modulus of nanocomposites (E c). The effects of these parameters are discussed using theoretical calculation and nylon 6/montmorillonite nanocomposite experiments. The former three factors exhibit dominant influence on E c. At a fixed volume fraction of the dispersed phase, smaller particles provide an increasing modulus for the resulting composite, as compared to the larger one because the interfacial region greatly affects E c. Moreover, since the size of fillers is in the scale of micrometers, the influence of interfacial region is neglected and the deduced equation is reduced to Takayanagi's model. The curves predicted by the three‐phase model are in good agreement with experimental results. The percolation concept and theory are also applied to analyze and interpret the experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A variational approach to the theory of the elastic behaviour of multiphase materials
Hashin, Z., & Shtrikman, S. (1963) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(63)90060-7 · Cited by 5,882
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786
The viscosity of a concentrated suspension of spherical particles
Mooney, M. (1951) · Journal of Colloid Science · doi:10.1016/0095-8522(51)90036-0 · Cited by 1,725
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Theory of Filler Reinforcement
Guth, E. (1945) · Journal of Applied Physics · doi:10.1063/1.1707495 · Cited by 1,232
Dynamic mechanical properties of particulate‐filled composites
Lewis, T. B., & Nielsen, L. E. (1970) · Journal of Applied Polymer Science · doi:10.1002/app.1970.070140604 · Cited by 1,030
Stiffness and Expansion Estimates for Oriented Short Fiber Composites
Halpin, J. C. (1969) · Journal of Composite Materials · doi:10.1177/002199836900300419 · Cited by 927
Synthesis of nylon 6–clay hybrid by montmorillonite intercalated with ϵ‐caprolactam
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080310418 · Cited by 893
A review of particulate reinforcement theories for polymer composites
Ahmed, S., & Jones, F. R. (1990) · Journal of Materials Science · doi:10.1007/bf00580110 · Cited by 781
Limiting Law of the Reinforcement of Rubber
Smallwood, H. M. (1944) · Journal of Applied Physics · doi:10.1063/1.1707385 · Cited by 555
Chain structure, phase morphology, and toughness relationships in polymers and blends
Wu, S. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301302 · Cited by 453
One‐pot synthesis of nylon 6–clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080310714 · Cited by 433
Messersmith, P. B., & Giannelis, E. P. (1993) · Chemistry of Materials · doi:10.1021/cm00032a005 · Cited by 374
Application of equivalent model method to dynamic rheo‐optical properties of crystalline polymer
Takayanagi, M., Uemura, S., & Minami, S. (1964) · Journal of Polymer Science Part C: Polymer Symposia · doi:10.1002/polc.5070050111 · Cited by 323
The Laminate Approximation for Randomly Oriented Fibrous Composites
Halpin, J. C., & Pagano, N. J. (1969) · Journal of Composite Materials · doi:10.1177/002199836900300416 · Cited by 274
McCreight, L. R. (1968) · Materials Science and Engineering · doi:10.1016/0025-5416(68)90034-7 · Cited by 220
Wu, S. (1992) · Polymer International · doi:10.1002/pi.4990290313 · Cited by 196
Wu, S., & Margolina, A. (1990) · Polymer · doi:10.1016/0032-3861(90)90068-a · Cited by 154
Percolation behavior in morphology and modulus of polymer blends
Hsu, W. Y., & Wu, S. (1993) · Polymer Engineering and Science · doi:10.1002/pen.760330509 · Cited by 77
Time-Temperature Superposition in Two-Phase Polyblends
Kaplan, D., & Tschoegl, N. W. (1974) · Springer eBooks · doi:10.1007/978-1-4684-2874-2_18 · Cited by 37
The Young’s modulus of silica beads/epoxy composites: Experiments and simulations
Monette, L., Anderson, M. P., Wagner, H. D., & Mueller, R. R. (1994) · Journal of Applied Physics · doi:10.1063/1.356378 · Cited by 22
Cited by
Ashraf, M. A., Peng, W., Zare, Y., & Rhee, K. Y. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-018-2624-0 · Cited by 660
Mechanical properties of high density polyethylene/carbon nanotube composites
Kanagaraj, S., Varanda, F. R., Zhil’tsova, T. V., Oliveira, M. S. A., & Simões, J. A. O. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2007.04.024 · Cited by 456
High-performance nanocomposites based on polyetherketones
Díez-Pascual, A. M., Naffakh, M., Marco, C., Ellis, G., & Gómez-Fatou, M. A. (2012) · Progress in Materials Science · doi:10.1016/j.pmatsci.2012.03.003 · Cited by 289
Kashfipour, M. A., Mehra, N., & Zhu, J. (2018) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-018-0022-9 · Cited by 273
Thermo-mechanical properties of LLDPE/SiO2 nanocomposites
Kontou, E., & Niaounakis, M. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.039 · Cited by 264
Metadata
- Authors
- Ji, X. L., Jing, J. K., Jiang, W., & Jiang, B. Z.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2002-05
- Volume
- 42
- Issue
- 5
- Pages
- 983-993
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2050847685
- Cited by
- 388
- References
- 21
- FWCI
- 5.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.