Crystallization kinetics of poly(L‐lactide) in contact with pressurized CO2
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The effect of CO 2 on the isothermal crystallization kinetics of poly(L‐lactide), PLLA, was investigated using a high‐pressure differential scanning calorimeter (DSC), which can perform calorimetric measurements while keeping the sample polymer in contact with pressurized CO 2. It was found that the crystallization rate followed the Avrami equation. However, the crystallization kinetic constant was changed depending upon the crystallization temperature and concentration of CO 2 dissolved in the PLLA. The crystallization rate was accelerated by CO 2 at the temperature in the crystal‐growth rate controlled region (self‐diffusion controlled region), and depressed in the nucleation‐controlled region. CO 2 has also decreased the glass transition temperature, Tg, and the melting temperature, Tm. As a result, the CO 2‐induced change in the crystallization rate can be predicted from the magnitudes of depression of both Tg and the equilibrium melting temperature. The crystalline structure and crystallinity of polymers crystallized in contact with pressurized CO 2 were also investigated using a wide angle X‐ray diffractometer (WAXD). The resulting crystallinity of the sample was increased with the pressure level of CO 2, although the presence of CO 2 did not change the crystalline structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 531
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
“, depression of Tg and Tm) due to increased free volume and chain mobility, but the crystalline structure stays unaffected [231,232].”
BackgroundMethodLi, Y., Yin, D., Liu, W., Zhou, H., Zhang, Y., & Wang, X. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.07.094 · Cited by 91
Metadata
- Authors
- Takada, M., Hasegawa, S., & Ohshima, M.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2004-01
- Volume
- 44
- Issue
- 1
- Pages
- 186-196
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W1972915436
- Cited by
- 157
- References
- 1
- FWCI
- 4.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.