The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Rheology and extrusion foaming of chain‐branched poly(lactic acid)
Open accessAbstract
In this study, the effect of macromolecular chain‐branching on poly(lactic acid) (PLA) rheology, crystallization, and extrusion foaming was investigated. Two PLA grades, an amorphous and a semi‐crystalline one, were branched using a multifunctional styrene‐acrylic‐epoxy copolymer. The branching of PLA and its foaming were achieved in one‐step extrusion process. Carbon dioxide (CO 2 ), in concentration up to 9%, was used as expansion agent to obtain foams from the two PLA branched using chain‐extender contents up to 2%. The foams were investigated with respect to their shear and elongational behavior, crystallinity, morphology, and density. The addition of the chain‐extender led to an increase in complex viscosity, elasticity, elongational viscosity, and in the manifestation of the strain‐hardening phenomena. Low‐density foams were obtained at 5–9% CO 2 for semi‐crystalline PLA and only at 9% CO 2 in the case of the amorphous PLA. Differences in foaming behavior were attributed to crystallites formation during the foaming process. The rheological and structural changes associated with PLA chain‐extension lowered the achieved crystallinity but slightly improved the foamability at low CO 2 content. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Aktuelle Probleme der Polymer-Physik · doi:10.1007/978-3-642-47050-9_24 · Cited by 679
Sentmanat, M. L. (2004) · Rheologica Acta · doi:10.1007/s00397-004-0405-4 · Cited by 321
Thermal and Rheological Properties of Commercial-Grade Poly(Lactic Acid)s
Dorgan, J. R., Lehermeier, H., & Mang, M. (2000) · Journal of Polymers and the Environment · doi:10.1023/a:1010185910301 · Cited by 294
Melt rheology of poly(lactic acid): Entanglement and chain architecture effects
Dorgan, J. R., Williams, J. S., & Lewis, D. N. (1999) · Journal of Rheology · doi:10.1122/1.551041 · Cited by 272
Structure and rheology of recycled PET modified by reactive extrusion
Incarnato, L., Scarfato, P., Di Maio, L., & Acierno, D. (2000) · Polymer · doi:10.1016/s0032-3861(00)00032-x · Cited by 230
Sentmanat, M., Wang, B. N., & McKinley, G. H. (2005) · Journal of Rheology · doi:10.1122/1.1896956 · Cited by 221
Melt Rheology of High l-Content Poly(lactic acid)
Palade, L.-I., Lehermeier, H. J., & Dorgan, J. R. (2001) · Macromolecules · doi:10.1021/ma001173b · Cited by 209
Oligomeric chain extenders for economic reprocessing and recycling of condensation plastics
Villalobos, M., Awojulu, A., Greeley, T., Turco, G., & Deeter, G. (2006) · Energy · doi:10.1016/j.energy.2006.03.026 · Cited by 202
Extrusion Foaming of Semi‐Crystalline PLA and PLA/Thermoplastic Starch Blends
Mihai, M., Huneault, M. A., Favis, B. D., & Li, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700080 · Cited by 188
Self-citationCooper-White, J. J., & Mackay, M. E. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990801)37:15<1803::aid-polb5>3.0.co;2-m · Cited by 161
Mihai, M., Huneault, M. A., & Favis, B. D. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30338 · Cited by 161
Self-citationMelt rheology of poly(lactic acid): Consequences of blending chain architectures
Lehermeier, H. J., & Dorgan, J. R. (2001) · Polymer Engineering and Science · doi:10.1002/pen.10912 · Cited by 153
Recycled poly(ethylene terephthalate) chain extension by a reactive extrusion process
Awaja, F., Daver, F., & Kosior, E. (2004) · Polymer Engineering and Science · doi:10.1002/pen.20155 · Cited by 147
Steady shear and dynamic properties of biodegradable polyesters
Ramkumar, D. H. S., & Bhattacharya, M. (1998) · Polymer Engineering and Science · doi:10.1002/pen.10313 · Cited by 134
Structural effect of linear and star‐shaped poly(L‐lactic acid) on physical properties
Kim, E. S., Kim, B. C., & Kim, S. H. (2004) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.10685 · Cited by 130
Tuominen, J. U., Kylmä, J., & Seppälä, J. V. (2002) · Polymer · doi:10.1016/s0032-3861(01)00606-1 · Cited by 100
Synthesis and characterization of biodegradable lactic acid‐based polymers by chain extension
Gu, S., Yang, M., Yu, T., Ren, T., & Ren, J. (2008) · Polymer International · doi:10.1002/pi.2435 · Cited by 94
Li, B., & Yang, M. (2006) · Polymers for Advanced Technologies · doi:10.1002/pat.731 · Cited by 91
Yamane, H., Sasai, K., Takano, M., & Takahashi, M. (2004) · Journal of Rheology · doi:10.1122/1.1687736 · Cited by 83
Extrusion Foaming of Poly(Lactic acid) Blown with CO 2 : Toward 100% Green Material
Reignier, J., Gendron, R., & Champagne, M. F. (2007) · Cellular Polymers · doi:10.1177/026248930702600202 · Cited by 74
Performance Evaluation of PLA against Existing PET and PS Containers
Auras, R. A., Singh, S., & Singh, J. (2006) · Journal of Testing and Evaluation · doi:10.1520/jte100041 · Cited by 73
Kylmä, J., Tuominen, J. U., Helminen, A. O., & Seppälä, J. V. (2001) · Polymer · doi:10.1016/s0032-3861(00)00751-5 · Cited by 68
A Digital Image Processing Technique for Quantification of Surface Hot-Shortness Cracks
Garza, L. G., & Tyne, C. J. V. (2005) · Journal of Testing and Evaluation · doi:10.1520/jte14017 · Cited by 64
Melt Stability Study of Various Types of Poly( l -lactide)
Södergård, A., & Näsman, J. H. (1996) · Industrial & Engineering Chemistry Research · doi:10.1021/ie950338f · Cited by 62
Nguyễn, Q. T., Japon, S., Luciani, A., et al. (2001) · Polymer Engineering and Science · doi:10.1002/pen.10830 · Cited by 61
Satô, Y., Inohara, K., Takishima, S., Masuoka, H., Imaizumi, M., Yamamoto, H., & Takasugi, M. (2000) · Polymer Engineering and Science · doi:10.1002/pen.11390 · Cited by 60
Chain‐linked lactic acid polymers by benzene diisocyanate
Ren, J., Wang, Q., Gu, S., Zhang, N., & Ren, T. (2005) · Journal of Applied Polymer Science · doi:10.1002/app.22617 · Cited by 27
Structure development in silica-filled polyacrylate rubber composites during mixing
Ono, S., Ito, M., Tokumitsu, H., & Seki, K. (1999) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19991205)74:10<2546::aid-app24>3.0.co;2-z · Cited by 17
(1997) · doi:10.1002/(sici)1097-4628(19970502)64:5<865::aid-app6>3.0.co;2-n
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Self-citationAl-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
From Lactic Acid to Poly(lactic acid) (PLA): Characterization and Analysis of PLA and Its Precursors
Inkinen, S., Hakkarainen, M., Albertsson, A.-C., & Södergård, A. (2011) · Biomacromolecules · doi:10.1021/bm101302t · Cited by 710
Nofar, M., & Park, C. B. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.04.001 · Cited by 531
Porous Hydrogels: Present Challenges and Future Opportunities
Foudazi, R., Zowada, R., Manas-Zloczower, I., & Feke, D. L. (2023) · Langmuir · doi:10.1021/acs.langmuir.2c02253 · Cited by 373
Metadata
- Authors
- Mihai, M., Huneault, M. A., & Favis, B. D.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2009-12-28
- Volume
- 50
- Issue
- 3
- Pages
- 629-642
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2158707982
- Cited by
- 264
- References
- 33
- FWCI
- 4.74
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.