Improvement of blown film extrusion of poly(Lactic Acid): Structure–Processing–Properties relationships
The DOI matches its Crossref record; 9 of the 9 references it cites were found in a registry or an index.
Abstract
The blown extrusion of poly(lactic acid) (PLA) presents several challenges mainly due to the poor shear and elongation properties of this biopolymer. This article highlights some promising routes to enhance the processability of PLA for blown extrusion. To achieve this objective, various formulations of PLA with multifunctionalized epoxy, nucleating agents, and plasticizer were elaborated and studied on the basis of their linear viscoelasticity and elongational properties. We further characterized both the structure and thermomechanical properties of blown films produced with these PLA formulations. Stability charts for the film blowing of neat and modified PLA were thus established at different processing conditions. On the basis of these results, we managed to achieve a large enhancement of the blown processing windows of PLA with high blow‐up ratio (BUR) and take‐up ratio attained. We were able to demonstrate that a higher kinetic of crystallization can also be reached for chain‐extended and branched PLA formulated with adequate amounts of nucleating agents and plasticizers. Induced crystallization during process was also demonstrated. Through this work, blown films with interesting thermomechanical and mechanical properties have been elaborated using an optimal formulation for PLA. POLYM. ENG. SCI., 54:840–857, 2014. © 2013 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Self-citationZhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Xu, H., Teng, C., & Yu, M. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.090 · Cited by 113
Cited by
Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy
Shi, C., Quinn, E. C., Diment, W. T., & Chen, E. Y.-X. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00848 · Cited by 402
Polylactide (PLA) and Its Blends with Poly(butylene succinate) (PBS): A Brief Review
Su, S., Kopitzky, R., Tolga, S., & Kabasci, S. (2019) · Polymers · doi:10.3390/polym11071193 · Cited by 380
Ilyas, R., Zuhri, M., Aisyah, H., Asyraf, M., Hassan, S., Zainudin, E., Sapuan, S., Sharma, S., Bangar, S., Jumaidin, R., et al. (2022) · Polymers · doi:10.3390/polym14010202 · Cited by 369
The Life Cycle Assessment for Polylactic Acid (PLA) to Make It a Low-Carbon Material
Rezvani Ghomi, E. R., Khosravi, F., Saedi Ardahaei, A. S., Dai, Y., Neisiany, R. E., Foroughi, F., Wu, M., Das, O., & Ramakrishna, S. (2021) · Polymers · doi:10.3390/polym13111854 · Cited by 295
Cosate de Andrade, M. F., Souza, P. M. S., Cavalett, O., & Morales, A. R. (2016) · Journal of Polymers and the Environment · doi:10.1007/s10924-016-0787-2 · Cited by 275
Metadata
- Authors
- Mallet, B., Lamnawar, K., & Maazouz, A.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2013-06-24
- Volume
- 54
- Issue
- 4
- Pages
- 840-857
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2156311749
- Cited by
- 130
- References
- 9
- FWCI
- 3.47
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improvement of blown film extrusion of poly(Lactic Acid): Structure–Processing–Properties relationships. https://app.cochat.ai/papers/10.1002/pen.23610
- The paper
- Mallet, B., Lamnawar, K., & Maazouz, A. (2014). Improvement of blown film extrusion of poly(Lactic Acid): Structure–Processing–Properties relationships. Polymer Engineering & Science. https://doi.org/10.1002/pen.23610
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.