The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Preparation and Properties of Plasticized Poly(lactic acid) Films
Abstract
Poly(lactic acid), PLA, was blended with monomeric and oligomeric plasticizers in order to enhance its flexibility and thereby overcome its inherent problem of brittleness. Differential scanning calorimetry, dynamic mechanical analysis, transmission electron microscopy, and tensile testing were used to investigate the properties of the blends. Monomeric plasticizers, such as tributyl citrate, TbC, and diethyl bishydroxymethyl malonate, DBM, drastically decreased the T(g) of PLA, but the blends showed no morphological stability over time since rapid cold crystallization caused a size reduction of the amorphous domains in PLA. Consequently, the ability of PLA to accommodate the plasticizer diminished with the increase in crystallinity and migration of the plasticizer occurred. Increasing the molecular weight of the plasticizers by synthesizing oligoesters and oligoesteramides resulted in blends that displayed T(g) depressions slightly smaller than with the monomeric plasticizers. The compatibility with PLA was dependent on the molecular weight of the oligomers and on the presence or not of polar amide groups that were able to positively interact with the PLA chains. Aging the materials at ambient temperature revealed that the enhanced flexibility as well as the morphological stability of the films plasticized with the oligomers could be maintained as a result of the higher molecular weight and the polar interactions with PLA.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Dubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
Polymers: Chemistry and physics of modern materials
Pearce, E. M. (1992) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1992.080300836 · Cited by 471
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 423
Self-citationPresent and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Research works printed but not linked: 7
- Bonsignore, P. V.; Coleman, R. D.Nonwovens Conference Proceedings; TAPPI Press: Atlanta, GA, 1992; p 129.
- Wehrenberg R. H., II., 1981, Mater. Eng., 94, 63
- Lipinsky E. S., 1986, Chem. Eng. Prog., 82, 26
- Lostocco M. R., 1998, Macromol. Symp.
- Lundgren D., 1996, Patent 5,525,646
- Yolles S., 1976, Parenter. Drug Assoc., 30, 306
- Yolles S., 1978, J. Parenter. Drug Assoc., 32, 188
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Plastics of the Future? The Impact of Biodegradable Polymers on the Environment and on Society
Haider, T. P., Völker, C., Kramm, J., Landfester, K., & Wurm, F. R. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201805766 · Cited by 1,591
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Metadata
- Authors
- Ljungberg, N., & Wesslén, B.
- Affiliations
- Lund University (SE)
- Corresponding author
- Ljungberg, Nadia
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-08
- Volume
- 6
- Issue
- 3
- Pages
- 1789-1796
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2007200637
- Cited by
- 331
- References
- 42
- Citations by year
- 2026: 9 · 2025: 5 · 2024: 22 · 2023: 15 · 2022: 14 · 2021: 13 · 2020: 19 · 2019: 12 · 2018: 19 · 2017: 20 · 2016: 30 · 2015: 21 · 2014: 24 · 2013: 25 · 2012: 16
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Lund University Publications (Lund University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Keywords
- polylactic acid, plasticized films, plasticizers, tributyl citrate, oligoesters, glass transition temperature depression, cold crystallization, plasticizer migration, polymer blends, blend compatibility, aging materials, flexibility, crystallinity
- MeSH terms
- Plasticizers, Polyesters, Polymers, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Preparation and Properties of Plasticized Poly(lactic acid) Films. https://app.cochat.ai/papers/10.1021/bm050098f
- The paper
- Ljungberg, N., & Wesslén, B. (2005). Preparation and Properties of Plasticized Poly(lactic acid) Films. Biomacromolecules. https://doi.org/10.1021/bm050098f
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.