The DOI matches its Crossref record; 35 of the 35 references it cites were found in a registry or an index.
Dielectric and piezoelectric properties of PVDF/PZT composites: A review
Abstract
Smart materials, which exhibit piezoelectricity, find an eclectic range of applications in the industry. The direct piezoelectric effect has been widely used in sensor design, and the inverse piezoelectric effect has been applied in actuator design. Ever since 1954, PZT and BaTiO 3 were widely used for sensor and actuator applications despite their toxicity, brittleness, inflexibility, etc. With the discovery of PVDF in 1969, followed by development of copolymers, a flexible, easy to process, nontoxic, high density alternate with high piezoelectric voltage coefficient was available. In the past 20 years, heterostructural materials like polymer ceramic composites, have received lot of attention, since these materials combine the excellent pyroelectric and piezoelectric properties of ceramics with the flexibility, processing facility, and strength of the polymers resulting in relatively high dielectric permittivity and breakdown strength, which are not attainable in a single phase piezoelectric material. The current review article is an attempt to provide a compendium of all the work carried out with reference to PVDF‐PZT composites. The review article evaluates the effect of grain size, content and other factors under the purview of dielectric and piezoelectric properties while evaluating the sensitivity of the material for sensor application. POLYM. ENG. SCI., 55:1589–1616, 2015. © 2015 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ferroelectric Ceramics: History and Technology
Haertling, G. H. (1999) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1999.tb01840.x · Cited by 4,051
MERZ, W. J. (1972) · Nature · doi:10.1038/236245a0 · Cited by 2,440
The piezoelectricity of poly (vinylidene fluoride)
Kawai, H. (1969) · Japanese Journal of Applied Physics · doi:10.1143/jjap.8.975 · Cited by 2,044
Connectivity and piezoelectric-pyroelectric composites
Newnham, R. E., Skinner, D. P., & Cross, L. E. (1978) · Materials Research Bulletin · doi:10.1016/0025-5408(78)90161-7 · Cited by 1,916
Electromagnetic Mixing Formulas and Applications
Sihvola, A. (1999) · doi:10.1049/pbew047e · Cited by 1,838
Principles and applications of ferroelectrics and related materials
Kaminow, I. P. (1978) · Proceedings of the IEEE · doi:10.1109/proc.1978.11135 · Cited by 1,179
Ferroelectric Polymers: Chemistry: Physics, and Applications
(1995) · CRC Press eBooks · doi:10.1201/9781482295450 · Cited by 1,128
Randall, C. A., Kim, N., Kucera, J., Cao, W., & Shrout, T. R. (1998) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1998.tb02389.x · Cited by 1,063
Three-Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., & Cornie, J. (1990) · CIRP Annals · doi:10.1016/s0007-8506(07)61035-x · Cited by 871
Rapid prototyping & manufacturing— Fundamentals of stereolithography
(1993) · Journal of Manufacturing Systems · doi:10.1016/0278-6125(93)90311-g · Cited by 850
A review of particulate reinforcement theories for polymer composites
Ahmed, S., & Jones, F. R. (1990) · Journal of Materials Science · doi:10.1007/bf00580110 · Cited by 781
Kim, P., Jones, S. C., Hotchkiss, P. J., Haddock, J. N., Kippelen, B., Marder, S. R., & Perry, J. W. (2007) · Advanced Materials · doi:10.1002/adma.200602422 · Cited by 601
Three Dimensional Printing: Rapid Tooling and Prototypes Directly from a CAD Model
Sachs, E., Cima, M., Williams, P., Brancazio, D., & Cornie, J. (1992) · Journal of Engineering for Industry · doi:10.1115/1.2900701 · Cited by 573
Byer, R. L., & Roundy, C. B. (1972) · Ferroelectrics · doi:10.1080/00150197208235326 · Cited by 500
Développement par compression de l'électricité polaire dans les cristaux hémièdres à faces inclinées
Curie, J., & Curie, P. (1880) · Bulletin de la Société minéralogique de France · doi:10.3406/bulmi.1880.1564 · Cited by 461
Fundamentals of Structural Dynamics
(2021) · Elsevier eBooks · doi:10.1016/c2020-0-00249-5 · Cited by 456
Piezoelectricity in polyvinylidenefluoride
Sessler, G. M. (1981) · The Journal of the Acoustical Society of America · doi:10.1121/1.387225 · Cited by 450
Piezoelectricity of a high-content lead zirconate titanate/polymer composite
Yamada, T., Ueda, T., & Kitayama, T. (1982) · Journal of Applied Physics · doi:10.1063/1.331211 · Cited by 449
Developments in Crystalline Polymers—1
(1982) · Springer eBooks · doi:10.1007/978-94-009-7343-5 · Cited by 440
Lovinger, A. J. (1982) · Developments in Crystalline Polymers—1 · doi:10.1007/978-94-009-7343-5_5 · Cited by 383
Size-induced diffuse phase transition in the nanocrystalline ferroelectric PbTiO3
Chattopadhyay, S., Ayyub, P., Palkar, V. R., & Multani, M. S. (1995) · Physical review. B, Condensed matter · doi:10.1103/physrevb.52.13177 · Cited by 375
Fundamentals of structural dynamics
Lam, H.-F., & Yang, J.-H. (2022) · Vibration Testing and Applications in System Identification of Civil Engineering Structures · doi:10.1201/9780429445866-2 · Cited by 325
Piezoelectric properties in the composite systems of polymers and PZT ceramics
Furukawa, T., Ishida, K., & Fukada, E. (1979) · Journal of Applied Physics · doi:10.1063/1.325592 · Cited by 323
Inorganic ceramic/polymer ferroelectric composite electrets
Dias, C. J., & Das-Gupta, D. K. (1996) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/94.544188 · Cited by 282
Cardiac imaging using a phased array ultrasound system. I. System design.
vonRamm, O. T., & Thurstone, F. L. (1976) · Circulation · doi:10.1161/01.cir.53.2.258 · Cited by 186
Pyroelectric or piezoelectric compensated ferroelectric composites
Ploss, B., Ploss, B., Shin, F. G., Chan, H. L. W., & Choy, C. L. (2000) · Applied Physics Letters · doi:10.1063/1.126472 · Cited by 146
Zola, É. (1986) · Anthropology Today · doi:10.2307/3032836 · Cited by 116
Dielectric relaxation in ferroelectric PZT–PVDF nanocomposites
Hilczer, B., Kułek, J., Markiewicz, E., Kosec, M., & Malič, B. (2002) · Journal of Non-Crystalline Solids · doi:10.1016/s0022-3093(02)01103-1 · Cited by 98
Thick film polymer-ceramic composites for pyroelectric applications
Dietze, M., Krause, J., Solterbeck, C. ‐., & Es‐Souni, M. (2007) · Journal of Applied Physics · doi:10.1063/1.2653978 · Cited by 89
Study on BaTiO3/P(VDF-TrFE) 0–3 composites
Chan, H. L. W., Cheung, M. C., & Choy, C. L. (1999) · Ferroelectrics · doi:10.1080/00150199908210557 · Cited by 60
Greeshma, T., Balaji, R., & Jayakumar, S. (2013) · Ferroelectrics Letters Section · doi:10.1080/07315171.2013.814460 · Cited by 50
Comment on “Effective dielectric function of a random medium”
Nan, C. (2001) · Physical review. B, Condensed matter · doi:10.1103/physrevb.63.176201 · Cited by 45
Mills, D. M., & Smith, S. W. (2002) · IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control · doi:10.1109/tuffc.2002.1020171 · Cited by 37
Theory of ferroelectric polymer-ceramic composites
Zewdie, H., & Brouers, F. (1990) · Journal of Applied Physics · doi:10.1063/1.346803 · Cited by 26
Activity of NiO in (Ni,Mg)O Solid Solutions
Kreidler, E. R., & Park, H. D. (1994) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1994.tb04631.x · Cited by 8
Cited by
A comprehensive review on the state-of-the-art of piezoelectric energy harvesting
Sezer, N., & Koç, M. (2021) · Nano Energy · doi:10.1016/j.nanoen.2020.105567 · Cited by 1,480
Piezoelectric Energy Harvesting Solutions: A Review
Covaci, C., & Gontean, A. (2020) · Sensors · doi:10.3390/s20123512 · Cited by 691
Liang, Z., Yan, C.-F., Rtimi, S., & Bandara, J. (2019) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2018.09.028 · Cited by 689
Advances in Piezoelectric Polymer Composites for Energy Harvesting Applications: A Systematic Review
Mishra, S., Unnikrishnan, L., Nayak, S. K., & Mohanty, S. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201800463 · Cited by 556
An overview of lead-free piezoelectric materials and devices
Wei, H., Wang, H., Xia, Y., Cui, D., Shi, Y., Dong, M., Liu, C., Ding, T., Zhang, J., Ma, Y., et al. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc04515a · Cited by 393
Metadata
- Authors
- Jain, A., K. J., P., Sharma, A. K., Jain, A., & P.N, R.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2015-05-02
- Volume
- 55
- Issue
- 7
- Pages
- 1589-1616
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2009707640
- Cited by
- 438
- References
- 35
- FWCI
- 10.07
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.