Improvement of compatibility and mechanical properties of the poly(lactic acid)/poly(butylene adipate‐ co ‐terephthalate) blends and films by reactive extrusion with chain extender
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Biodegradable poly(lactic acid)/poly(butylene adipate‐ co ‐terephthalate) (PLA/PBAT) blends and films were prepared by melt blending and blowing films technique in the presence of chain extender. The Joncryl ADR‐4370F (ADR) was used as the chain extender. The effect of ADR on the mechanical properties, rheological behavior, morphology, and thermal behavior of PLA/PBAT blends was investigated. The mechanical properties were markedly improved by incorporation of 0.15 phr ADR, for example, the elongation at break increased from 23.5% to 410.3% and the notched Izod impact strength increased from 7.5 to 33.4 KJ/m 2 for the PLA/PBAT/ADR blends. The elongation at break increased from 17.7% to 264.6% and the tensile strength increased from 28.0 to 40.7 MPa for the PLA/PBAT/ADR films in the transverse direction. The tensile strength and tear strength of the films increased from 28.0 to 40.7 MPa and from 135.5 to 163.8 kN/m in the machine direction, respectively. Morphological observation through scanning electron microscopy revealed that the compatibility of the PLA/PBAT blends was greatly enhanced by the incorporation of ADR. The interfacial adhesion was improved between PLA phase and PBAT phase. These findings contributed new knowledge to the additives area and gave important implications for manufacturing biodegradable polymer packaging material. POLYM. ENG. SCI., 58:1868–1878, 2018. © 2017 Society of Plastics Engineers
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Arruda, L. C., Magaton, M., Bretas, R. E. S., & Ueki, M. M. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.02.005 · Cited by 397
Cited by
Wang, X., Peng, S., Chen, H., Yu, X., & Zhao, X. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107028 · Cited by 393
Han, Y., Shi, J., Mao, L., Wang, Z., & Zhang, L. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c04285 · Cited by 262
Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review
Scaffaro, R., Maio, A., Sutera, F., Gulino, E., & Morreale, M. (2019) · Polymers · doi:10.3390/polym11040651 · Cited by 254
Aversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Super Toughened Poly(lactic acid)-Based Ternary Blends via Enhancing Interfacial Compatibility
Wu, F., Misra, M., & Mohanty, A. K. (2019) · ACS Omega · doi:10.1021/acsomega.8b02587 · Cited by 79
Metadata
- Authors
- Li, X., Yan, X., Yang, J., Pan, H., Gao, G., Zhang, H., & Dong, L.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 2017-12-22
- Volume
- 58
- Issue
- 10
- Pages
- 1868-1878
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2776075319
- Cited by
- 82
- References
- 3
- FWCI
- 1.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.