The DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization
Abstract
Abstract Different ratios of poly(lactic acid)/poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends were prepared by melt blending in the presence of a multifunctional epoxy oligomers as reactive compatibilizer. During reactive blending, the compatibilizer could react with PLA and PBAT chains to increase melt elasticity, viscosity, and compatibility, as indicated by rheological curve and Han plot analyses. Adding the compatibilizer improved the tensile and impact toughness for all ratios of PLA/PBAT blends. The elongation at break and the notched impact strength of the blend reached 579.9% and 29.6 kJ/m2, respectively, which were 75.3 and 12.3 times that of neat PLA. The shear yield deformation of impact fractured surface and the fuzzy phase interface of cryo-fractured surface showed that the high toughness can be attributed to the reaction of the epoxy group of reactive compatibilizer with the terminal carboxyl and hydroxyl groups of PLA and PBAT to form a large number of branched copolymers. Thus, the improvement of the interfacial adhesion and compatibility of the two polymers induced that brittle-ductile transition occurred in the failure of the blend.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Estimation of the surface free energy of polymers
Owens, D. K., & Wendt, R. C. (1969) · Journal of Applied Polymer Science · doi:10.1002/app.1969.070130815 · Cited by 9,476
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Al-Itry, R., Lamnawar, K., & Maazouz, A. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.06.028 · Cited by 906
Fowkes, F. M. (1962) · The Journal of Physical Chemistry · doi:10.1021/j100808a524 · Cited by 806
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Ma, P., Cai, X., Zhang, Y., Wang, S., Dong, W., Chen, M., & Lemstra, P. J. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.025 · Cited by 252
Ojijo, V., Sinha Ray, S., & Sadiku, R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400482f · Cited by 245
PLA/PBAT Bionanocomposites with Antimicrobial Natural Rosin for Green Packaging
Moustafa, H., El Kissi, N., Abou-Kandil, A. I., Abdel-Aziz, M. S., & Dufresne, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b05557 · Cited by 240
Research works printed but not linked: 4
- Walha, 2016, Polym Bull, 8, 61
- Hobbs, 1598, Polymer, 29
- Luan, 2011, J Appl Polym Sci, 121, 2143, 10.1002/app.33940 · doi:10.1002/app.33940
- Zhou, 2018, Polym Bull, 75, 5437, 10.1007/s00289-018-2339-5 · DOI
Cited by
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Self-citationAversa, C., Barletta, M., Cappiello, G., & Gisario, A. (2022) · European Polymer Journal · doi:10.1016/j.eurpolymj.2022.111304 · Cited by 213
Chen, X., Zeng, Z., Ju, Y., Zhou, M., Bai, H., & Fu, Q. (2023) · Polymer · doi:10.1016/j.polymer.2022.125620 · Cited by 114
Liu, W., Wang, Y., Xiang, S., & Liu, H. (2024) · Polymer · doi:10.1016/j.polymer.2024.126815 · Cited by 55
Kim, D. Y., Lee, J. B., Lee, D. Y., & Seo, K. H. (2020) · Polymers · doi:10.3390/polym12091904 · Cited by 48
Metadata
- Authors
- Wang, X., Peng, S., Chen, H., Yu, X., & Zhao, X.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-09
- Volume
- 173
- Pages
- 107028
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2952984436
- Cited by
- 393
- References
- 47
- FWCI
- 13.82
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- Hubei Provincial Department of Education
- National Natural Science Foundation of China
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization. https://app.cochat.ai/papers/10.1016/j.compositesb.2019.107028
- The paper
- Wang, X., Peng, S., Chen, H., Yu, X., & Zhao, X. (2019). Mechanical properties, rheological behaviors, and phase morphologies of high-toughness PLA/PBAT blends by in-situ reactive compatibilization. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2019.107028
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.