The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Crystallization of poly(etheretherketone) (PEEK) in carbon fiber composites
Abstract
The tendency of carbon fiber to nucleate the zation of poly(etherettterlcetone) (PEEK) has been evaluated by DSC and other techniques. As the carbon fiber content was increased, the supercooling necessary for PEEK crystallization decreased. The repeated melting (at 396°C) of the same PEEK sample results in a decrease of the number of nuclei for crystallization. At equivalent thermal histories, PEEK with carbon fiber was found to have a higher nucleation density than PEEK itself. The surface of carbon fibers and nuclei in the PEEK matrix compete for crystallization growth. As the holding time in melt was increased, the number of matrix spherulites formed on cooling decreased, hence a more pronounced transcrystalline region was developed. Correspondingly, the composites preheated in the melt for 100 min showed about two times the transverse tensile strength and strain‐to‐failure of those preheated for only 30 min. Corresponding fracture surface produced in tension showed that the former samples had a greater matrix adhesion to the carbon fiber than the latter. A strong interfacial bond is thus developed by crystallization on carbon fiber surface. Destroying nuclei in the PEEK matrix by long preheating enhances crystallization on the carbon fiber.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An Introduction to Composite Materials
Clyne, T. W., & Hull, D. (2019) · Cambridge University Press eBooks · doi:10.1017/9781139050586 · Cited by 3,018
The morphology of poly(aryl-ether-ether-ketone)
Blundell, D. J., & Osborn, B. N. (1983) · Polymer · doi:10.1016/0032-3861(83)90144-1 · Cited by 1,064
(1976) · Elsevier eBooks · doi:10.1016/b978-0-12-765602-1.x5001-0 · Cited by 1,059
A Phenomenological Theory of Spherulitic Crystallization
Keith, H. D., & Padden, F. J. (1963) · Journal of Applied Physics · doi:10.1063/1.1702757 · Cited by 876
Kinetics of Heterogeneous Nucleation
Turnbull, D. (1950) · The Journal of Chemical Physics · doi:10.1063/1.1747588 · Cited by 670
An Introduction to Composite Materials
Johnson, A. F. (1982) · Physics Bulletin · doi:10.1088/0031-9112/33/9/035 · Cited by 394
Chatterjee, A. M., Price, F. P., & Newman, S. T. (1975) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1975.180131211 · Cited by 125
Row Nucleation of Isotactic Polypropylene on Graphite Fibres
Hobbs, S. Y. (1971) · Nature Physical Science · doi:10.1038/physci234012a0 · Cited by 96
Das Kristallisations- und Schmelzverhalten hochpolymerer Stoffe
Zachmann, H. G. (2006) · Springer eBooks · doi:10.1007/bfb0050473 · Cited by 92
Diffusion in a Polymer With Lamellar Morphology, Polyethylene
Eby, R. K. (1964) · Journal of Applied Physics · doi:10.1063/1.1713829 · Cited by 89
Crystallization phenomena in fibre‐forming polymers
Morgan, L. B. (1954) · Journal of Applied Chemistry · doi:10.1002/jctb.5010040403 · Cited by 87
Natural and artificial heterogeneous nucleation in polymer crystallization
Binsbergen, F. L. (1977) · Journal of Polymer Science Polymer Symposia · doi:10.1002/polc.5070590104 · Cited by 84
Epitaxial crystallization of polyethylene on graphite
Tuinstra, F., & Baer, E. (1970) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1970.110081205 · Cited by 71
A kinetic study of the isothermal spherulitic crystallization of polyhexamethylene adipamide
McLaren, J. V. (1963) · Polymer · doi:10.1016/0032-3861(63)90024-7 · Cited by 50
Heterrogeneous nucleation of polyethylene melts on cleaved surfaces of alkali halides
Koutsky, J. A., Walton, A. G., & Baer, E. (1967) · Journal of Polymer Science Part B Polymer Letters · doi:10.1002/pol.1967.110050210 · Cited by 40
Cited by
Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review
Ageorges, C., Ye, L., & Hou, M. (2001) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/s1359-835x(00)00166-4 · Cited by 535
On transcrystallinity in semi-crystalline polymer composites
Quan, H., Li, Z.-M., Yang, M.-B., & Huang, R. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2004.11.015 · Cited by 322
A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix
Tang, L., & Kardos, J. L. (1997) · Polymer Composites · doi:10.1002/pc.10265 · Cited by 309
Crystallinity studies of PEKK and carbon fibre/PEKK composites: A review
Pérez-Martín, H., Mackenzie, P., Baidak, A., Ó Brádaigh, C. M., & Ray, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109127 · Cited by 212
Bhattarai, N., Kim, H. Y., Cha, D. I., Lee, D. R., & Yoo, D. I. (2003) · European Polymer Journal · doi:10.1016/s0014-3057(02)00389-0 · Cited by 38
Metadata
- Authors
- Lee, Y., & Porter, R. S.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1986-05
- Volume
- 26
- Issue
- 9
- Pages
- 633-639
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2083953080
- Cited by
- 281
- References
- 15
- FWCI
- 10.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.