The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Nucleation of microcellular foam: Theory and practice
Abstract
Microcellular polymer foams exhibit greatly improved mechanical properties as compared to standard foams due to the formers' small bubble size. Microcellular foams have bubbles with diameters on the order of 10 microns, volume reductions of 30 to 40 percent, and six or seven times the impact strength of solid parts. They are produced through the use of thermodynamic instabilities without the use of foaming agents. This method leads to a very uniform cell size throughout a part's cross section. A theoretical model for the nucleation of microcellular foams in thermoplastic polymers has been developed and experimentally confirmed. This model explains the effect of various additives and processing conditions on the number of bubbles nucleated. At levels of secondary constituents below their solubility limits, an increase in the concentration of the additive or the concentration of gas in solution with the polymer increases the number of bubbles nucleated. Nucleation in this region is homogeneous. Above the solubility limit of additives, nucleation is heterogeneous and takes place at the interface between second phase inclusions and the polymer. The number of bubbles nucleated is dependent on the concentration of heterogeneous nucleation sites and their relative effect on the activation energy barrier to nucleation. In the vicinity of the solubility limit, the two mechanisms compete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Nucleation in solids: The induction and steady state effects
Russell, K. C. (1980) · Advances in Colloid and Interface Science · doi:10.1016/0001-8686(80)80003-0 · Cited by 455
Cited by
Goel, S. K., & Beckman, E. J. (1994) · Polymer Engineering & Science · doi:10.1002/pen.760341407 · Cited by 519
A process for making microcellular thermoplastic parts
Kumar, V., & Suh, N. P. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760302010 · Cited by 474
Self-citationPark, C. B., Baldwin, D. F., & Suh, N. P. (1995) · Polymer Engineering & Science · doi:10.1002/pen.760350509 · Cited by 427
Self-citationNucleation and Expansion During Extrusion and Microwave Heating of Cereal Foods
Moraru, C. I., & Kokini, J. L. (2003) · Comprehensive Reviews in Food Science and Food Safety · doi:10.1111/j.1541-4337.2003.tb00020.x · Cited by 419
Porous Hydrogels: Present Challenges and Future Opportunities
Foudazi, R., Zowada, R., Manas-Zloczower, I., & Feke, D. L. (2023) · Langmuir · doi:10.1021/acs.langmuir.2c02253 · Cited by 373
Past and present developments in polymer bead foams and bead foaming technology
Raps, D., Hossieny, N., Park, C. B., & Altstädt, V. (2015) · Polymer · doi:10.1016/j.polymer.2014.10.078 · Cited by 284
Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
Di, Y., Iannace, S., Maio, E. D., & Nicolais, L. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20366 · Cited by 257
Chemical Modification and Foam Processing of Polylactide (PLA)
Standau, T., Zhao, C., Murillo Castellón, S., Bonten, C., & Altstädt, V. (2019) · Polymers · doi:10.3390/polym11020306 · Cited by 210
Metadata
- Authors
- Colton, J. S., & Suh, N. P.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1987-04
- Volume
- 27
- Issue
- 7
- Pages
- 500-503
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2011424948
- Cited by
- 355
- References
- 1
- FWCI
- 0.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.