The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusion
Abstract
Results of experimental and modeling studies of the peroxide promoted degradation of polypropylene (PP) are presented. Experiments were carried out, in glass ampoules and in a plasticating extruder. The initiator, 2.5‐dimethyl‐2,5‐bis(tert‐butylperoxy)hexane was used as a radical generator. The extruder used had a 38 mm diameter and 24:1 L/D single‐screw. In these experiments, the effect of peroxide concentration and screw speed on the molecular weight distribution (MWD) of the polypropylene resin was studied. Samples collected from the experimental runs were analyzed for melt flow index (MFI), flow curve, extrudate swell, and MWD. The measured data are presented and correlations among various parameters are considered. Generally, it can be concluded that controlled‐rheology (CR) resins with lower molecular weight, narrower MWD, and reduced viscosity and elasticity, can be produced, A kinetic model for the peroxide Initiated degradation of PP is proposed. Simulations based on this model are compared with experimental data for the production of CR resins. The experimental data were obtained from three sources: (i) industry, (ii) literature, and (iii) present experimental work. The comparison was done in terms of average molecular weights of the resin. Agreement between model predictions and experimental results is quite satisfactory suggesting that this model should find use in commercial practice.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Some problems in particle technology
Hulburt, H. M., & Katz, S. (1964) · Chemical Engineering Science · doi:10.1016/0009-2509(64)85047-8 · Cited by 1,670
Cited by
Use of recycled plastics in wood plastic composites – A review
Kazemi Najafi, S. (2013) · Waste Management · doi:10.1016/j.wasman.2013.05.017 · Cited by 337
Gahleitner, M. (2001) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00011-9 · Cited by 278
100th anniversary of macromolecular science viewpoint: needs for plastics packaging circularity
Billiet, S., & Trenor, S. R. (2020) · ACS Macro Letters · doi:10.1021/acsmacrolett.0c00437 · Cited by 138
Metadata
- Authors
- Tzoganakis, C., Vlachopoulos, J., & Hamielec, A. E.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1988-02
- Volume
- 28
- Issue
- 3
- Pages
- 170-180
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W1989352431
- Cited by
- 172
- References
- 2
- FWCI
- 7.70
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusion. https://app.cochat.ai/papers/10.1002/pen.760280308
- The paper
- Tzoganakis, C., Vlachopoulos, J., & Hamielec, A. E. (1988). Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusion. Polymer Engineering & Science. https://doi.org/10.1002/pen.760280308
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.