Rubber toughening of poly(lactide) by blending and block copolymerization
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Copolymers of L‐lactide with 15 or more mole % D‐lactide are amorphous, noncrystallizable hydrolytically degradable materials. These glassy materials are brittle in tension and bending. To make these materials suitable for use as load‐bearing devices in biomedical applications, toughness has to be enhanced. This is effectively accomplished by introducing a separate degradable rubber phase in the amorphous matrix. Several approaches have been explored: solution blending and coprecipitation of trimethylene carbonate and ϵ‐caprolactone rubbers and poly(lactide), preparation of ABA triblock copolymers and blending of ABA block copolymers with the amorphous poly(lactide) matrix. In all cases very tough materials could be prepared. These materials are easily processable by compression molding at relatively low temperatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, S. M., Garreau, H., & Vert, M. (1990) · Journal of Materials Science: Materials in Medicine · doi:10.1007/bf00700871 · Cited by 733
Lewis acid catalyzed polymerization of L-lactide. Kinetics and mechanism of the bulk polymerization
Nijenhuis, A. J., Grijpma, D. W., & Pennings, A. J. (1992) · Macromolecules · doi:10.1021/ma00050a006 · Cited by 407
Self-citationZhu, K. J., Xiangzhou, L., & Shilin, Y. (1990) · Journal of Applied Polymer Science · doi:10.1002/app.1990.070390101 · Cited by 313
Polymerization temperature effects on the properties of l-lactide and ?-caprolactone copolymers
Grijpma, D. W., & Pennings, A. J. (1991) · Polymer Bulletin · doi:10.1007/bf00316903 · Cited by 165
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Metadata
- Authors
- Grijpma, D. W., Van Hofslot, R. D. A., Supèr, H., Nijenhuis, A. J., & Pennings, A. J.
- Venue
- Polymer Engineering & Science
- Publisher
- Wiley
- Published
- 1994-11
- Volume
- 34
- Issue
- 22
- Pages
- 1674-1684
- ISSN
- 0032-3888 (ISSN-L)
- 1548-2634
- OpenAlex
- W2158781475
- Cited by
- 146
- References
- 4
- FWCI
- 2.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.