The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Preparation and characterisation of biodegradable starch‐based nanocomposite materials
Abstract
Different formulations of biodegradable starch–polyester blend nanocomposite materials have been film blown on a pilot scale film blowing tower. The physical properties of different films have been examined by thermal and mechanical analysis and X‐ray diffraction. The results show that the addition of an organoclay (from 0 to 5 wt%) significantly improves both the processing and tensile properties over the original starch blends. Wide angle X‐ray diffraction (WAXD) results indicate that the best results were obtained for 30 wt% starch blends, and the level of delamination depends on the ratio of starch to polyester and amount of organoclay added. The crystallisation temperature of the nanocomposite blends is significantly lower than the base blend. This is probably due to the platelets inhibiting order, and hence crystallisation, of the starch and polyester. The mechanical and thermal properties of the blends are also sensitive to the way the clay particles are dispersed. Copyright © 2003 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Water vapor permeability of biodegradable polymers
Shogren, R. (1997) · Journal of environmental polymer degradation · doi:10.1007/bf02763592 · Cited by 287
Cited by
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Functional Materials in Food Nanotechnology
Weiss, J., Takhistov, P., & McClements, D. J. (2006) · Journal of Food Science · doi:10.1111/j.1750-3841.2006.00195.x · Cited by 1,104
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Applications and implications of nanotechnologies for the food sector
Chaudhry, Q., Scotter, M., Blackburn, J., Ross, B., Boxall, A., Castle, L., Aitken, R., & Watkins, R. (2008) · Food Additives & Contaminants: Part A · doi:10.1080/02652030701744538 · Cited by 1,051
Natural Biopolymer-Based Nanocomposite Films for Packaging Applications
Rhim, J.-W., & Ng, P. K. W. (2007) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408390600846366 · Cited by 849
Biodegradable Multiphase Systems Based on Plasticized Starch: A Review
Avérous, L. (2004) · Journal of Macromolecular Science, Part C: Polymer Reviews · doi:10.1081/mc-200029326 · Cited by 834
Nanotechnology and its applications in the food sector
Sozer, N., & Kokini, J. L. (2009) · Trends in Biotechnology · doi:10.1016/j.tibtech.2008.10.010 · Cited by 824
Starch-based nano-biocomposites
Xie, F., Pollet, E., Halley, P. J., & Avérous, L. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.002 · Cited by 550
Self-citationRecent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Emerging biodegradable materials: starch- and protein-based bio-nanocomposites
Zhao, R., Torley, P., & Halley, P. J. (2008) · Journal of Materials Science · doi:10.1007/s10853-007-2434-8 · Cited by 376
Self-citationThermoplastic Starch Processing and Characteristics—A Review
Zhang, Y., Rempel, C., & Liu, Q. (2014) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2011.636156 · Cited by 348
Progress in nano-biocomposites based on polysaccharides and nanoclays
Chivrac, F., Pollet, E., & Avérous, L. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.09.002 · Cited by 321
Thermoplastic starch–clay nanocomposites and their characteristics
Chen, B., & Evans, J. R. G. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.06.020 · Cited by 318
Chitosan/clay nanocomposite film preparation and characterization
Xu, Y., Ren, X., & Hanna, M. A. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22664 · Cited by 301
Preparation of cassava starch/montmorillonite composite film
Kampeerapappun, P., Aht-ong, D., Pentrakoon, D., & Srikulkit, K. (2007) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2006.05.012 · Cited by 300
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
Film blowing of thermoplastic starch
Thunwall, M., Kuthanová, V., Boldizar, A., & Rigdahl, M. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.07.001 · Cited by 169
Metadata
- Authors
- McGlashan, S. A., & Halley, P. J.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2003-10-27
- Volume
- 52
- Issue
- 11
- Pages
- 1767-1773
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W2054367370
- Cited by
- 208
- References
- 1
- FWCI
- 6.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.