Reactive compatibilization of poly( l ‐lactide)/poly(butylene succinate) blends through polyester maleation: from materials to properties
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
The melt blending of poly( l ‐lactide) ( PLLA ) with biodegradable poly(butylene succinate) ( PBS ) is considered with a view to fine‐tuning its mechanical properties and its degradability. For this purpose, both maleic‐anhydride‐grafted PLLA ( PLLA ‐ g ‐ MA ) and maleic‐anhydride‐grafted PBS ( PBS ‐ g ‐ MA ) were prepared and used as reactive compatibilizers. The influence of PBS melt viscosity on the morphology and mechanical properties of PLLA / PBS blends was studied. Interestingly, the blending of low viscosity PBS with PLLA allows PLLA to be toughened while the use of high viscosity PBS led to PLLA / PBS blends exhibiting co‐continuous morphology. The nanostructure of the co‐continuous blends may be tuned through the joint action of organo‐modified clays and reactive compatibilizers. The effect of PBS on PLLA degradability was also investigated. The accelerated weathering testing of blends reveals that such combination of biodegradable polymers allows their degradability rate to be tailored. It is found that the addition of 20 wt% PBS to PLLA allows the molar mass loss fraction to be doubled after 425 h of testing. © 2014 Society of Chemical Industry
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites
Ke, T., & Sun, X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12162 · Cited by 200
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Polylactic acid synthesis, biodegradability, conversion to microplastics and toxicity: a review
Ali, W., Ali, H., Gillani, S., Zinck, P., & Souissi, S. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01564-8 · Cited by 335
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017) · Polymer Reviews · doi:10.1080/15583724.2017.1287726 · Cited by 255
Metadata
- Authors
- Persenaire, O., Quintana, R., Lemmouchi, Y., Sampson, J., Martin, S., Bonnaud, L., & Dubois, P.
- Venue
- Polymer International
- Publisher
- Wiley
- Published
- 2014-02-18
- Volume
- 63
- Issue
- 9
- Pages
- 1724-1731
- ISSN
- 0959-8103 (ISSN-L)
- 1097-0126
- OpenAlex
- W1510439364
- Cited by
- 37
- References
- 3
- FWCI
- 1.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Reactive compatibilization of poly( l ‐lactide)/poly(butylene succinate) blends through polyester maleation: from materials to properties. https://app.cochat.ai/papers/10.1002/pi.4700
- The paper
- Persenaire, O., Quintana, R., Lemmouchi, Y., Sampson, J., Martin, S., Bonnaud, L., & Dubois, P. (2014). Reactive compatibilization of poly( l ‐lactide)/poly(butylene succinate) blends through polyester maleation: from materials to properties. Polymer International. https://doi.org/10.1002/pi.4700
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.