The DOI matches its Crossref record; 12 of the 12 references it cites were found in a registry or an index.
Progress in Toughening Poly(Lactic Acid) with Renewable Polymers
Abstract
Poly(lactic acid) (PLA) is regarded as one of the most promising biobased and biodegradable polymers due its various advantages including high mechanical strength, easy processability, high melting temperature, renewability, biodegradability, and biocompatibility. However, the inherent brittleness significantly restricts its wide application. Therefore, toughening PLA has attracted more and more attention and various materials have been used to blend with PLA for toughening. Considering the fact that the use of petroleum-based species to toughen PLA would partially sacrifice the sustainability, various renewable polymers have recently been employed to toughen PLA. A series of important achievements have been obtained but not reviewed. This article aims to review progress in toughening PLA with renewable polymers. The toughening theories and compatibilization strategies are also briefly introduced.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Literature Review of Poly(Lactic Acid)
Garlotta, D. (2001) · Journal of Polymers and the Environment · doi:10.1023/a:1020200822435 · Cited by 3,707
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Preparation and characterization of biodegradable PLA polymeric blends
Chen, C.-C., Chueh, J.-Y., Tseng, H., Huang, H.-M., & Lee, S.-Y. (2003) · Biomaterials · doi:10.1016/s0142-9612(02)00466-0 · Cited by 583
Pillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366 · cited 1×
“For example, the addition of 20 wt% citrate esters, PLA oligomer, or dibutyl sebacate could increase the elongation at break of PLA to 200»420% from less than 10% of neat PLA.(31,62,69) However, there are some significant problems associated with plasticization.”
BackgroundLjungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Bai, H., Xiu, H., Gao, J., Deng, H., Zhang, Q., Yang, M., & Fu, Q. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201564f · Cited by 260
Research works printed but not linked: 165
- 10.1016/j.progpolymsci.2013.05.006 · DOI · Paper page
- 10.1016/j.carbpol.2010.08.051 · DOI · Paper page
- 10.1039/C1PY00456E · DOI
- 10.1021/mz300243t · doi:10.1021/mz300243t
- 10.1002/biot.201000136 · DOI · Paper page
- 10.1021/bm800745p · DOI
- 10.1021/am502735q · DOI · Paper page
- 10.1021/acssuschemeng.5b00740 · DOI
- 10.1021/acssuschemeng.5b00816 · DOI · Paper page
- 10.1080/19443994.2014.880159 · DOI
- 10.1002/1521-4095(200012)12:23<1841::AID-ADMA1841>3.0.CO;2-E · DOI · Paper page
- 10.1080/15583724.2010.537799 · DOI
- Narayan R., 1993, Degradation of polymeric materials, in ccience and engineering of composting: Design, environmental, microbiological and utilization aspects
- 10.1016/j.progpolymsci.2008.05.004 · DOI · Paper page
- 10.1039/C5RA01655J · DOI · Paper page
- 10.1021/sc500783s · DOI
- 10.1021/acssuschemeng.6b00321 · DOI · Paper page
- 10.1021/jp511742b · doi:10.1021/jp511742b
- 10.1021/ma100304n · DOI · Paper page
- 10.1021/ma102439t · DOI · Paper page
- 10.1016/j.polymer.2009.01.001 · DOI · Paper page
- 10.1021/ie801391m · DOI
- 10.1002/pola.23635 · DOI
- 10.1002/(SICI)1097-4628(19971121)66:8<1507::AID-APP11>3.0.CO;2-0 · DOI · Paper page
- 10.1016/j.eurpolymj.2009.07.006 · DOI · Paper page
- 10.1016/j.eurpolymj.2015.02.040 · DOI
- 10.1007/s00289-008-1012-9 · DOI · Paper page
- 10.1016/j.polymertesting.2014.07.010 · DOI
- 10.1002/pola.1254 · DOI · Paper page
- 10.1002/app.12462 · DOI · Paper page
- 10.1002/mabi.200300093 · DOI · Paper page
- 10.1021/ie900576f · DOI
- 10.1016/j.eurpolymj.2008.12.010 · DOI · Paper page
- 10.1016/j.polymer.2008.12.025 · DOI · Paper page
- 10.1002/pen.21210 · DOI · Paper page
- 10.1002/mame.201000107 · DOI
- 10.1021/ie102422q · DOI
- 10.1016/j.tca.2012.03.019 · DOI
- 10.1021/ma101108g · DOI · Paper page
- 10.1021/ma1026934 · DOI · Paper page
- 10.1016/j.eurpolymj.2014.11.007 · DOI
- 10.1021/sc500648g · DOI
- 10.1002/mame.201500032 · DOI
- 10.1021/acs.jpcb.5b06244 · DOI
- 10.1021/acs.macromol.5b00235 · DOI
- 10.1021/acssuschemeng.5b00788 · DOI
- 10.1021/acssuschemeng.5b01596 · DOI
- 10.1021/acs.macromol.5b02613 · DOI
- 10.1016/j.carbpol.2015.12.073 · DOI
- 10.1039/C6RA13631A · DOI
- 10.1016/S0032-3861(01)00086-6 · DOI · Paper page
- 10.1080/10601329608010880 · DOI · Paper page
- 10.1002/app.12549 · DOI · Paper page
- 10.1007/s10924-011-0285-5 · DOI
- 10.1002/pat.1131 · DOI · Paper page
- 10.1002/mame.201300226 · DOI
- 10.1002/jctb.3918 · DOI
- 10.1002/pen.23238 · DOI
- 10.1002/app.42476 · DOI
- 10.1016/S0032-3861(01)00086-6 · DOI · Paper page
- 10.1016/j.polymdegradstab.2012.11.009 · DOI · Paper page
- 10.1002/pen.11517 · DOI · Paper page
- 10.1002/app.43201 · DOI
- 10.1021/bm5012739 · DOI · Paper page
- 10.1039/c3py01649h · DOI
- 10.1016/j.polymer.2004.10.047 · DOI · Paper page
- 10.1016/j.eurpolymj.2009.04.028 · DOI · Paper page
- 10.1016/j.polymer.2008.06.054 · DOI · Paper page
- 10.1016/j.polymer.2011.12.036 · DOI
- 10.1016/j.polymer.2010.06.045 · DOI · Paper page
- Ishiaku U. S., 2007, J. Biobased Mater. Bio., 1, 78, 10.1166/jbmb.2007.1981 · DOI
- 10.1016/j.polymer.2013.07.051 · DOI · Paper page
- 10.1021/bm050581q · DOI · Paper page
- 10.1007/s10853-008-3049-4 · DOI · Paper page
- 10.1016/j.polymdegradstab.2014.01.025 · DOI · Paper page
- 10.1002/mabi.200700027 · DOI · Paper page
- 10.1007/s002890050280 · DOI
- 10.1002/app.33338 · DOI
- 10.1002/macp.201200696 · DOI
- 10.1039/c3ra43253j · DOI
- 10.1021/am900514v · DOI
- 10.1021/ma902449x · DOI
- 10.1016/j.polymer.2011.02.002 · DOI · Paper page
- 10.1016/j.eurpolymj.2013.01.016 · DOI
- 10.1016/j.jbiotec.2007.03.017 · DOI
- 10.1021/am5004766 · DOI · Paper page
- 10.1016/j.matdes.2012.09.024 · DOI · Paper page
- 10.1016/j.polymer.2013.02.053 · DOI
- 10.1021/bm5010993 · DOI · Paper page
- 10.1016/j.eurpolymj.2015.08.029 · DOI · Paper page
- 10.1002/pi.4700 · DOI
- 10.1016/j.polymer.2015.10.038 · DOI · Paper page
- 10.1002/pi.4990290313 · DOI · Paper page
- 10.1002/app.1978.070220723 · DOI
- 10.1002/pen.760301302 · DOI · Paper page
- 10.1002/pol.1956.1202210114 · DOI · Paper page
- 10.1016/0032-3861(85)90015-1 · DOI · Paper page
- 10.1016/0032-3861(89)90386-8 · DOI · Paper page
- 10.1016/0032-3861(95)91338-8 · DOI
- 10.1021/ma00218a020 · DOI
- 10.1021/ma00076a036 · DOI
- 10.1002/pi.2065 · DOI
- 10.1021/bk-2000-0759.ch009 · doi:10.1021/bk-2000-0759.ch009
- 10.1016/j.polymer.2011.03.055 · DOI · Paper page
- 10.1080/03602559.2014.958777 · DOI
- 10.1002/(SICI)1097-4628(20000711)77:2<409::AID-APP18>3.0.CO;2-N · DOI · Paper page
- 10.1007/BF00376274 · doi:10.1007/bf00376274
- 10.1016/S0032-3861(97)00052-9 · DOI
- 10.1016/S0032-3861(00)00375-X · DOI
- 10.1016/S0079-6700(97)00054-3 · DOI · Paper page
- 10.1039/c4ra00718b · DOI
- 10.1016/j.polymertesting.2014.07.004 · DOI
- 10.1039/C5GC00912J · DOI
- 10.1021/ma970036k · DOI · Paper page
- 10.1021/ie300133a · DOI
- 10.1039/C5RA21297A · DOI
- 10.1016/j.biortech.2013.12.043 · DOI
- 10.1016/j.polymer.2015.04.029 · doi:10.1016/j.polymer.2015.04.029
- 10.1039/C4RA05484A · DOI
- 10.1016/j.polymer.2014.05.059 · DOI
- 10.1016/S0141-3910(01)00156-2 · DOI · Paper page
- 10.1021/am301842e · DOI
- 10.1021/am400482f · DOI · Paper page
- 10.1038/srep08249 · DOI
- 10.1016/j.biortech.2010.05.075 · DOI · Paper page
- 10.1002/mame.201400187 · DOI
- 10.1002/app.40888 · DOI
- 10.1007/s00289-012-0810-2 · DOI
- 10.1039/C5PY01332A · DOI
- 10.1016/S0032-3861(02)00798-X · doi:10.1016/s0032-3861(02)00798-x
- 10.1016/j.polymer.2009.01.032 · DOI · Paper page
- 10.1002/pi.4300 · DOI
- 10.1002/pc.22383 · DOI
- 10.3144/expresspolymlett.2014.82 · DOI · Paper page
- 10.1002/app.20734 · DOI
- 10.1016/S0014-3057(99)00068-3 · DOI
- 10.1016/j.eurpolymj.2013.07.033 · DOI
- 10.1021/bm049472m · DOI · Paper page
- 10.1002/(SICI)1097-0126(199603)39:3<169::AID-PI453>3.0.CO;2-Z · doi:10.1002/(sici)1097-0126(199603)39:3<169::aid-pi453>3.0.co;2-z
- 10.1039/C4RA06199C · DOI
- 10.1016/j.polymer.2011.07.032 · DOI
- 10.1021/ma4020615 · DOI
- 10.1016/j.eurpolymj.2015.08.008 · DOI
- 10.1016/j.polymdegradstab.2015.12.017 · DOI
- 10.1128/AEM.71.6.2803-2812.2005 · DOI · Paper page
- 10.1016/j.matchemphys.2011.05.016 · DOI · Paper page
- 10.1007/s10924-012-0544-0 · DOI
- 10.1007/s10965-013-0121-9 · DOI
- Jaratrotkamjorn R., 2012, J. Appl. Polym. Sci., 124, 5027, 10.1002/app.35617 · DOI · Paper page
- 10.1002/pi.3118 · DOI
- 10.1016/j.polymer.2014.06.091 · DOI
- 10.1002/app.27095 · DOI
- 10.1002/app.30846 · doi:10.1002/app.30846
- 10.1021/acs.iecr.5b02195 · DOI
- 10.1002/app.42850 · DOI
- 10.1016/j.progpolymsci.2006.07.001 · DOI · Paper page
- 10.1021/ma9022795 · DOI
- 10.1021/am2006367 · DOI
- 10.1007/s10853-014-8509-4 · DOI
- 10.1016/j.matlet.2014.06.133 · DOI
- 10.1177/0021998310369580 · doi:10.1177/0021998310369580
- 10.1002/pi.4618 · DOI
- 10.1007/s10118-014-1487-9 · DOI
- 10.1016/j.polymer.2015.03.032 · DOI
- Zhang X., 2016, J. Appl. Polym. Sci., 133, 42983, 10.1002/app.42983 · DOI
Cited by
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Tripathi, N., Misra, M., & Mohanty, A. K. (2021) · ACS Engineering Au · doi:10.1021/acsengineeringau.1c00011 · Cited by 304
Yang, D.-D., Liu, W., Zhu, H.-M., Wu, G., Chen, S.-C., Wang, X.-L., & Wang, Y.-Z. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b06343 · Cited by 60
Deokar, M. D., Garnaik, B., & Sivaram, S. (2022) · ACS Omega · doi:10.1021/acsomega.1c04486 · Cited by 21
Metadata
- Authors
- Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B.
- Venue
- Polymer Reviews
- Publisher
- Informa UK Limited
- Published
- 2017-02-08
- Volume
- 57
- Issue
- 4
- Pages
- 557-593
- ISSN
- 0736-6574 (ISSN-L)
- 1558-3724
- 1558-3716
- OpenAlex
- W2587523086
- Cited by
- 255
- References
- 12
- FWCI
- 7.99
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Progress in Toughening Poly(Lactic Acid) with Renewable Polymers. https://app.cochat.ai/papers/10.1080/15583724.2017.1287726
- The paper
- Wang, M., Wu, Y., Li, Y.-D., & Zeng, J.-B. (2017). Progress in Toughening Poly(Lactic Acid) with Renewable Polymers. Polymer Reviews. https://doi.org/10.1080/15583724.2017.1287726
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
