The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Device characteristics of a 10.1% hydrazine‐processed Cu2ZnSn(Se,S)4 solar cell
Abstract
A power conversion efficiency record of 10.1% was achieved for kesterite absorbers, using a Cu 2 ZnSn(Se,S)4 thin‐film solar cell made by hydrazine‐based solution processing. Key device characteristics were compiled, including light/dark J–V, quantum efficiency, temperature dependence of Voc and series resistance, photoluminescence, and capacitance spectroscopy, providing important insight into how the devices compare with high‐performance Cu(In,Ga)Se 2. The record kesterite device was shown to be primarily limited by interface recombination, minority carrier lifetime, and series resistance. The new level of device performance points to the significant promise of the kesterites as an emerging and commercially interesting thin‐film technology. Copyright © 2011 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
High‐Efficiency Solar Cell with Earth‐Abundant Liquid‐Processed Absorber
Todorov, T. K., Reuter, K. B., & Mitzi, D. B. (2010) · Advanced Materials · doi:10.1002/adma.200904155 · Cited by 1,132
Self-citationFabrication of 7.2% Efficient CZTSSe Solar Cells Using CZTS Nanocrystals
Guo, Q., Ford, G. M., Yang, W.-C., Walker, B. C., Stach, E. A., Hillhouse, H. W., & Agrawal, R. (2010) · Journal of the American Chemical Society · doi:10.1021/ja108427b · Cited by 969
Katagiri, H., Jimbo, K., Yamada, S., Kamimura, T., Maw, W. S., Fukano, T., Ito, T., & Motohiro, T. (2008) · Applied Physics Express · doi:10.1143/apex.1.041201 · Cited by 807
A review and comparison of different methods to determine the series resistance of solar cells
Pysch, D., Mette, A., & Glunz, S. W. (2007) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2007.05.026 · Cited by 487
Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells
Gunawan, O., Todorov, T. K., & Mitzi, D. B. (2010) · Applied Physics Letters · doi:10.1063/1.3522884 · Cited by 395
Self-citationMaterial considerations for terawatt level deployment of photovoltaics
Feltrin, A., & Freundlich, A. (2008) · Renewable Energy · doi:10.1016/j.renene.2007.05.024 · Cited by 323
Long lifetimes in high-efficiency Cu(In,Ga)Se2 solar cells
Metzger, W. K., Repins, I. L., & Contreras, M. Á. (2008) · Applied Physics Letters · doi:10.1063/1.2957983 · Cited by 187
Cited by
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Lee, M. M., Teuscher, J., Miyasaka, T., Murakami, T. N., & Snaith, H. J. (2012) · Science · doi:10.1126/science.1228604 · Cited by 10,687
Eperon, G. E., Burlakov, V. M., Docampo, P., Goriely, A., & Snaith, H. J. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201302090 · Cited by 1,982
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
Ball, J. M., Lee, M. M., Hey, A., & Snaith, H. J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40810h · Cited by 1,662
Solar cell efficiency tables (version 39)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2012) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2163 · Cited by 1,161
Materials interface engineering for solution-processed photovoltaics
Graetzel, M., Janssen, R. A. J., Mitzi, D. B., & Sargent, E. H. (2012) · Nature · doi:10.1038/nature11476 · Cited by 1,112
Self-citationThin-film Sb2Se3 photovoltaics with oriented one-dimensional ribbons and benign grain boundaries
Zhou, Y., Wang, L., Chen, S., Qin, S., Liu, X., Chen, J., Xue, D.-J., Luo, M., Cao, Y., Cheng, Y., et al. (2015) · Nature Photonics · doi:10.1038/nphoton.2015.78 · Cited by 1,047
Kesterite Thin‐Film Solar Cells: Advances in Materials Modelling of Cu2ZnSnS4
Walsh, A., Chen, S., Wei, S., & Gong, X. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201100630 · Cited by 695
Co-evaporated Cu2ZnSnSe4 films and devices
Repins, I., Beall, C., Vora, N., DeHart, C., Kuciauskas, D., Dippo, P., To, B., Mann, J., Hsu, W.-C., Goodrich, A., et al. (2012) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2012.01.008 · Cited by 608
Strategic review of secondary phases, defects and defect-complexes in kesterite CZTS–Se solar cells
Kumar, M., Dubey, A., Adhikari, N., Venkatesan, S., & Qiao, Q. (2015) · Energy & Environmental Science · doi:10.1039/c5ee02153g · Cited by 583
Shi, J., Dong, J., Lv, S., Xu, Y., Zhu, L., Xiao, J., Xu, X., Wu, H., Li, D., Luo, Y., et al. (2014) · Applied Physics Letters · doi:10.1063/1.4864638 · Cited by 505
Burke, T. M., Sweetnam, S., Vandewal, K., & McGehee, M. D. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500123 · Cited by 408
Renewable and sustainable energy saving strategies for greenhouse systems: A comprehensive review
Cuce, E., Harjunowibowo, D., & Cuce, P. M. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2016.05.077 · Cited by 380
Ibn-Mohammed, T., Koh, S. C. L., Reaney, I. M., Acquaye, A., Schileo, G., Mustapha, K. B., & Greenough, R. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.095 · Cited by 379
Why are kesterite solar cells not 20% efficient?
Siebentritt, S. (2013) · Thin Solid Films · doi:10.1016/j.tsf.2012.12.089 · Cited by 372
Defect Engineering in Multinary Earth‐Abundant Chalcogenide Photovoltaic Materials
Shin, D., Saparov, B., & Mitzi, D. B. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201602366 · Cited by 357
Self-citationCZTS nanocrystals: a promising approach for next generation thin film photovoltaics
Zhou, H., Hsu, W.-C., Duan, H.-S., Bob, B., Yang, W., Song, T.-B., Hsu, C.-J., & Yang, Y. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41627e · Cited by 356
Khare, A., Himmetoglu, B., Johnson, M., Norris, D. J., Cococcioni, M., & Aydil, E. S. (2012) · Journal of Applied Physics · doi:10.1063/1.4704191 · Cited by 311
Fan, F.-J., Wu, L., & Yu, S.-H. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee41437j · Cited by 278
Nanotechnology in Solar and Biofuels
Ramsurn, H., & Gupta, R. B. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400046y · Cited by 109
Metadata
- Authors
- Barkhouse, D. A. R., Gunawan, O., Gokmen, T., Todorov, T. K., & Mitzi, D. B.
- Venue
- Progress in Photovoltaics: Research and Applications
- Publisher
- Wiley
- Published
- 2011-09-06
- Volume
- 20
- Issue
- 1
- Pages
- 6-11
- ISSN
- 1062-7995 (ISSN-L)
- 1099-159X
- OpenAlex
- W2150004845
- Cited by
- 826
- References
- 7
- FWCI
- 75.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.