The DOI matches its Crossref record.
Reproducible manufacturing of dye‐sensitized solar cells on a semi‐automated baseline
Abstract
A fully operational baseline consisting of dedicated equipment to process nanocrystalline dye‐sensitized solar cell devices has been installed at ECN. This baseline focuses on the production of glass/glass devices with dimensions up to 10×10 cm 2. Present power conversion efficiencies of 6% obtained for cell areas of 2ċ5 cm 2 are successfully translated to 100 cm 2 devices with an active area of 68 cm 2 by application of identical cell components. The power conversion efficiency with respect to total area was 4%. Processing of a large number of devices in the baseline shows good results in terms of process reliability and yield. The overall yield for a series of 27 devices (10×10 cm 2) was 96%, while 84% (22 of the remaining 26 devices) generated a cell efficiency within 7% deviation from the average value (4ċ3%). The reproducibility of the titanium dioxide (TiO 2) colloid synthesis has been investigated. The deviation from the average efficiency (4ċ9%) of three batches of colloid was at most 3ċ2%. These results prove that complete device manufacturing of nc‐DSC by a baseline process, starting with colloid synthesis is reproducible for surfaces up to 10×10 cm 2. Copyright © 2003 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Hagfeldt, A., Boschloo, G., Sun, L., Kloo, L., & Pettersson, H. (2010) · Chemical Reviews · doi:10.1021/cr900356p · Cited by 8,931
Recent Advances in Sensitized Mesoscopic Solar Cells
Grätzel, M. (2009) · Accounts of Chemical Research · doi:10.1021/ar900141y · Cited by 2,671
Characterization of nanostructured hybrid and organic solar cells by impedance spectroscopy
Fabregat-Santiago, F., Garcia-Belmonte, G., Mora-Seró, I., & Bisquert, J. (2011) · Physical Chemistry Chemical Physics · doi:10.1039/c0cp02249g · Cited by 1,206
Dye-Sensitized Solar Cells: Fundamentals and Current Status
Sharma, K., Sharma, V., & Sharma, S. S. (2018) · Nanoscale Research Letters · doi:10.1186/s11671-018-2760-6 · Cited by 1,084
Nanostructured photoelectrodes for dye-sensitized solar cells
Zhang, Q., & Cao, G. (2011) · Nano Today · doi:10.1016/j.nantod.2010.12.007 · Cited by 631
Nanocrystalline dye‐sensitized solar cells having maximum performance
Kroon, J. M., Bakker, N. J., Smit, H. J. P., Liska, P., Thampi, K. R., Wang, P., Zakeeruddin, S. M., Grätzel, M., Hinsch, A., Hore, S., et al. (2007) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.707 · Cited by 571
Self-citationInfluence of a TiCl4Post-Treatment on Nanocrystalline TiO2Films in Dye-Sensitized Solar Cells
Sommeling, P. M., O'Regan, B. C., Haswell, R. R., Smit, H. J. P., Bakker, N. J., Smits, J. J. T., Kroon, J. M., & van Roosmalen, J. A. M. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp061346k · Cited by 548
Self-citationHaque, S. A., Palomares, E., Cho, B. M., Green, A. N. M., Hirata, N., Klug, D. R., & Durrant, J. R. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0460357 · Cited by 510
O'Regan, B. C., Durrant, J. R., Sommeling, P. M., & Bakker, N. J. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp073056p · Cited by 489
Self-citationBeyond Efficiency: the Challenge of Stability in Mesoscopic Perovskite Solar Cells
Rong, Y., Liu, L., Mei, A., Li, X., & Han, H. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201501066 · Cited by 473
A perspective on the production of dye-sensitized solar modules
Fakharuddin, A., Jose, R., Brown, T. M., Fabregat-Santiago, F., & Bisquert, J. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01724b · Cited by 447
Review on the development of natural dye photosensitizer for dye-sensitized solar cells
Ludin, N. A., Al-Alwani Mahmoud, A. M., Bakar Mohamad, A., Kadhum, A. A. H., Sopian, K., & Abdul Karim, N. S. (2014) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2013.12.001 · Cited by 418
Advanced research trends in dye-sensitized solar cells
Kokkonen, M., Talebi, P., Zhou, J., Asgari, S., Soomro, S. A., Elsehrawy, F., Halme, J., Ahmad, S., Hagfeldt, A., & Hashmi, S. G. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00690h · Cited by 372
Stable Large‐Area (10 × 10 cm2) Printable Mesoscopic Perovskite Module Exceeding 10% Efficiency
Hu, Y., Si, S., Mei, A., Rong, Y., Liu, H., Li, X., & Han, H. (2017) · Solar RRL · doi:10.1002/solr.201600019 · Cited by 328
Ito, S., Nazeeruddin, M. K., Liska, P., Comte, P., Charvet, R., Péchy, P., Jirousek, M., Kay, A., Zakeeruddin, S. M., & Grätzel, M. (2006) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.683 · Cited by 312
Progress on Electrolytes Development in Dye-Sensitized Solar Cells
Iftikhar, H., Sonai, G. G., Hashmi, S. G., Nogueira, A. F., & Lund, P. D. (2019) · Materials · doi:10.3390/ma12121998 · Cited by 253
Sun, H., Luo, Y., Zhang, Y., Li, D., Yu, Z., Li, K., & Meng, Q. (2010) · The Journal of Physical Chemistry C · doi:10.1021/jp1030015 · Cited by 253
Najm, A. S., Alwash, S. A., Sulaiman, N. H., Chowdhury, M. S., & Techato, K. (2023) · Environmental Progress & Sustainable Energy · doi:10.1002/ep.13955 · Cited by 75
Metadata
- Authors
- Späth, M., Sommeling, P. M., van Roosmalen, J. A. M., Smit, H. J. P., van der Burg, N. P. G., Mahieu, D. R., Bakker, N. J., & Kroon, J. M.
- Venue
- Progress in Photovoltaics: Research and Applications
- Publisher
- Wiley
- Published
- 2003-02-14
- Volume
- 11
- Issue
- 3
- Pages
- 207-220
- ISSN
- 1062-7995 (ISSN-L)
- 1099-159X
- OpenAlex
- W2169802281
- Cited by
- 179
- References
- 0
- FWCI
- 9.84
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.