The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Analysis of the failure mechanism for a stable organic photovoltaic during 10 000 h of testing
Abstract
The degradation and failure mechanisms of a stable photovoltaic device comprising a bilayer heterojunction formed between poly(3‐carboxythiophene‐2,5‐diyl‐co‐thiophene‐2,5‐diyl) (P3CT) and Buckminsterfullerene (C 60) sandwiched between indium tin oxide (ITO) and aluminium (Al) electrodes were elucidated by the time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) analysis in conjunction with isotopic labelling using 18 O 2 after a total testing time of 13 000 h. This experiment allowed us to understand the chemistry that takes place in three dimensions during degradation and failure of the device under accelerated testing conditions. The cell was subjected to continuous illumination with an incident light intensity of 1000 W m−2 (AM1·5) at 72 ± 2°C under a vacuum of <10−6 mBar. During the illumination period, IV‐curves were recorded at regular intervals and the short circuit current of the device was monitored every 10 s for 10 760 h. The total illumination time was 12 200 h. During this period of time, the device performance degraded and the device was finally left in the dark at 25°C in an atmosphere where the oxygen had been replaced with the isotope 18 O 2. After 800 h in this atmosphere in the dark, the final IV‐curves in the dark and under illumination were recorded. The main purpose of this work was the analysis using TOF‐SIMS imaging and depth profiling of the degraded cell. The combined analyses correspond to the three‐dimensional chemical imaging of the device showing specifically where the oxygen had reacted during exposure. Several general findings were made that are applicable to similar devices. It was found that the oxygen diffuses into the device through the Al electrode in between the Al grains and through microscopic holes in the Al electrode. Once inside the device the oxygen diffuses in the lateral and vertical plane until the counter electrode is reached. C 60 was found to be susceptible to the incorporation of 18 O but P3CT was not under the conditions in question. The other prominent degradation pathway was found to be the diffusion of electrode materials into the device. Both electrode materials diffuse through the entire device to the counter electrode. Copyright © 2007 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, G., Shrotriya, V., Huang, J., Yao, Y., Moriarty, T., Emery, K., & Yang, Y. (2005) · Nature Materials · doi:10.1038/nmat1500 · Cited by 5,535
Design Rules for Donors in Bulk‐Heterojunction Solar Cells—Towards 10 % Energy‐Conversion Efficiency
Scharber, M. C., Mühlbacher, D., Koppe, M., Denk, P., Waldauf, C., Heeger, A. J., & Brabec, C. J. (2006) · Advanced Materials · doi:10.1002/adma.200501717 · Cited by 5,205
Ma, W., Yang, C., Gong, X., Lee, K., & Heeger, A. J. (2005) · Advanced Functional Materials · doi:10.1002/adfm.200500211 · Cited by 4,565
Brabec, C. J., Sariciftci, N. S., & Hummelen, J. C. (2001) · Advanced Functional Materials · doi:10.1002/1616-3028(200102)11:1<15::aid-adfm15>3.0.co;2-a · Cited by 3,773
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
Organic solar cells: An overview
Hoppe, H., & Sariciftci, N. S. (2004) · Journal of Materials Research · doi:10.1557/jmr.2004.0252 · Cited by 2,556
Conjugated Polymer Photovoltaic Cells
Coakley, K. M., & McGehee, M. D. (2004) · Chemistry of Materials · doi:10.1021/cm049654n · Cited by 2,128
Nanoscale Morphology of High-Performance Polymer Solar Cells
Yang, X., Loos, J., Veenstra, S. C., Verhees, W. J. H., Wienk, M. M., Kroon, J. M., Michels, M. A. J., & Janssen, R. A. J. (2005) · Nano Letters · doi:10.1021/nl048120i · Cited by 1,543
A brief history of the development of organic and polymeric photovoltaics
Spanggaard, H., & Krebs, F. C. (2004) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2004.02.021 · Cited by 1,181
Self-citationDegradation of organic solar cells due to air exposure
Kawano, K., Pacios, R., Poplavskyy, D., Nelson, J., Bradley, D. D. C., & Durrant, J. R. (2006) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2006.06.041 · Cited by 734
Cited by
Fabrication and processing of polymer solar cells: A review of printing and coating techniques
Krebs, F. C. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.10.004 · Cited by 3,260
Self-citationPolymer–Fullerene Bulk‐Heterojunction Solar Cells
Brabec, C. J., Gowrisanker, S., Halls, J. J. M., Laird, D., Jia, S., & Williams, S. P. (2010) · Advanced Materials · doi:10.1002/adma.200903697 · Cited by 2,621
Stability/degradation of polymer solar cells
Jørgensen, M., Norrman, K., & Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.005 · Cited by 2,335
Self-citationOrganometal halide perovskite solar cells: degradation and stability
Berhe, T. A., Su, W.-N., Chen, C.-H., Pan, C.-J., Cheng, J.-H., Chen, H.-M., Tsai, M.-C., Chen, L.-Y., Dubale, A. A., & Hwang, B.-J. (2016) · Energy & Environmental Science · doi:10.1039/c5ee02733k · Cited by 1,779
Stability of Polymer Solar Cells
Jørgensen, M., Norrman, K., Gevorgyan, S. A., Tromholt, T., Andreasen, B., & Krebs, F. C. (2012) · Advanced Materials · doi:10.1002/adma.201104187 · Cited by 1,366
Self-citationLiao, S., Jhuo, H., Cheng, Y., & Chen, S. (2013) · Advanced Materials · doi:10.1002/adma.201301476 · Cited by 1,259
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Dou, L., You, J., Hong, Z., Xu, Z., Li, G., Street, R. A., & Yang, Y. (2013) · Advanced Materials · doi:10.1002/adma.201302563 · Cited by 1,151
Stability of organic solar cells: challenges and strategies
Cheng, P., & Zhan, X. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00593k · Cited by 1,046
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Krebs, F. C., Tromholt, T., & Jørgensen, M. (2010) · Nanoscale · doi:10.1039/b9nr00430k · Cited by 1,024
Self-citationHau, S. K., Yip, H.-L., Baek, N. S., Zou, J., O’Malley, K., & Jen, A. K.-Y. (2008) · Applied Physics Letters · doi:10.1063/1.2945281 · Cited by 841
Krebs, F. C., Jørgensen, M., Norrman, K., Hagemann, O., Alstrup, J., Nielsen, T. D., Fyenbo, J., Larsen, K., & Kristensen, J. (2009) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.12.001 · Cited by 808
Self-citationA Thieno[3,4-c]pyrrole-4,6-dione-Based Copolymer for Efficient Solar Cells
Zou, Y., Najari, A., Berrouard, P., Beaupré, S., Réda Aïch, B., Tao, Y., & Leclerc, M. (2010) · Journal of the American Chemical Society · doi:10.1021/ja101888b · Cited by 769
Advanced materials and processes for polymer solar cell devices
Helgesen, M., Søndergaard, R., & Krebs, F. C. (2010) · J. Mater. Chem. · doi:10.1039/b913168j · Cited by 767
Self-citationInverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Yang, T., Wang, M., Duan, C., Hu, X., Huang, L., Peng, J., Huang, F., & Gong, X. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22296e · Cited by 656
Krebs, F. C. (2009) · Organic Electronics · doi:10.1016/j.orgel.2009.03.009 · Cited by 608
Self-citationTypes of Solar Cells and Application
Mohammad Bagher, A. (2015) · American Journal of Optics and Photonics · doi:10.11648/j.ajop.20150305.17 · Cited by 574
Liao, S.-H., Jhuo, H.-J., Yeh, P.-N., Cheng, Y.-S., Li, Y.-L., Lee, Y.-H., Sharma, S., & Chen, S.-A. (2014) · Scientific Reports · doi:10.1038/srep06813 · Cited by 497
Polymer solar cells: Recent development and possible routes for improvement in the performance
Cai, W., Gong, X., & Cao, Y. (2010) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2009.10.005 · Cited by 463
Tip-Enhanced Raman Spectroscopy: Technique and Recent Advances
Verma, P. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00821 · Cited by 448
Morphology characterization in organic and hybrid solar cells
Chen, W., Nikiforov, M. P., & Darling, S. B. (2012) · Energy & Environmental Science · doi:10.1039/c2ee22056c · Cited by 400
Nanostructured Organic and Hybrid Solar Cells
Weickert, J., Dunbar, R. B., Hesse, H. C., Wiedemann, W., & Schmidt‐Mende, L. (2011) · Advanced Materials · doi:10.1002/adma.201003991 · Cited by 325
Air stable polymer photovoltaics based on a process free from vacuum steps and fullerenes
Krebs, F. C. (2008) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2008.01.013 · Cited by 303
Self-citationWater-Induced Degradation of Polymer Solar Cells Studied by H218O Labeling
Norrman, K., Gevorgyan, S. A., & Krebs, F. C. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am800039w · Cited by 281
Self-citationPhotoinduced Degradation of Polymer and Polymer–Fullerene Active Layers: Experiment and Theory
Reese, M. O., Nardes, A. M., Rupert, B. L., Larsen, R. E., Olson, D. C., Lloyd, M. T., Shaheen, S. E., Ginley, D. S., Rumbles, G., & Kopidakis, N. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201001079 · Cited by 276
Liu, C., Zhang, L., Xiao, L., Peng, X., & Cao, Y. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10264 · Cited by 35
Metadata
- Authors
- Krebs, F. C., & Norrman, K.
- Venue
- Progress in Photovoltaics: Research and Applications
- Publisher
- Wiley
- Published
- 2007-11-19
- Volume
- 15
- Issue
- 8
- Pages
- 697-712
- ISSN
- 1062-7995 (ISSN-L)
- 1099-159X
- OpenAlex
- W2040394151
- Cited by
- 420
- References
- 20
- FWCI
- 32.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.