Effect of interfacial bonding on the strength of adhesion
The DOI matches its Crossref record.
Abstract
The strength of adhesion has been determined experimentally for an elastomer layer coupled to a rigid substrate by interfacial chemical bonds of varying surface density. Sites for interfacial bonding were obtained by treating glass plates with mixtures of vinyl‐and ethylsilanes in varying proportions. A layer of polybutadiene was then applied and cross‐linked in situ by a free‐radical process. Formation of interfacial bonds to vinyl groups (when present) on the glass substrate is inferred from the proportional increase in strength of adhesion under near‐equilibrium conditions, i.e., at low rates of detachment and at high temperatures. A 35‐fold increase in strength was found for vinylsilane, relative to ethylsilane, in rough agreement with the relative magnitudes of the strengths of covalent and dispersion bonds. However, the absolute magnitudes were much greater than predicted, by a factor of about 25 in both cases. This is attributed to the polymeric character of the elastomer: many molecular bonds must be stressed in order to detach or rupture one.4 In agreement with this hypothesis, the strength of adhesion decreased with increasing crosslinking. Anomalously high adhesion was found with clean glass. It presumably reflects a specific bonding mechanism of unknown type.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Tough bonding of hydrogels to diverse non-porous surfaces
Yuk, H., Zhang, T., Lin, S., Parada, G. A., & Zhao, X. (2016) · Nature Materials · doi:10.1038/nmat4463 · Cited by 1,184
Soft Materials by Design: Unconventional Polymer Networks Give Extreme Properties
Zhao, X., Chen, X., Yuk, H., Lin, S., Liu, X., & Parada, G. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c01088 · Cited by 1,161
Hydrogel Adhesion: A Supramolecular Synergy of Chemistry, Topology, and Mechanics
Yang, J., Bai, R., Chen, B., & Suo, Z. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201901693 · Cited by 1,033
Fracture and adhesion of soft materials: a review
Creton, C., & Ciccotti, M. (2016) · Reports on Progress in Physics · doi:10.1088/0034-4885/79/4/046601 · Cited by 915
Mucoadhesive polymeric platforms for controlled drug delivery
Andrews, G. P., Laverty, T. P., & Jones, D. S. (2009) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2008.09.028 · Cited by 863
The use of mucoadhesive polymers in buccal drug delivery
SALAMATMILLER, N., CHITTCHANG, M., & JOHNSTON, T. (2005) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2005.07.003 · Cited by 691
Baldan, A. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000007726.58758.e4 · Cited by 625
Advances in oral transmucosal drug delivery
Patel, V. F., Liu, F., & Brown, M. B. (2011) · Journal of Controlled Release · doi:10.1016/j.jconrel.2011.01.027 · Cited by 574
The science of adhesion: Part 1 Surface and interfacial aspects
Kinloch, A. J. (1980) · Journal of Materials Science · doi:10.1007/bf00552302 · Cited by 484
The peeling of flexible laminates
Kinloch, A. J., Lau, C. C., & Williams, J. G. (1994) · International Journal of Fracture · doi:10.1007/bf00012635 · Cited by 451
Gent, A. N. (1996) · Langmuir · doi:10.1021/la950887q · Cited by 362
Self-citationMucoadhesion: A promising approach in drug delivery system
Mansuri, S., Kesharwani, P., Jain, K., Tekade, R. K., & Jain, N. K. (2016) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2016.01.011 · Cited by 351
The science of adhesion: Part 2 Mechanics and mechanisms of failure
Kinloch, A. J. (1982) · Journal of Materials Science · doi:10.1007/bf00540361 · Cited by 265
Metadata
- Authors
- Ahagon, A., & Gent, A. N.
- Venue
- Journal of Polymer Science: Polymer Physics Edition
- Publisher
- Wiley
- Published
- 1975-07
- Volume
- 13
- Issue
- 7
- Pages
- 1285-1300
- ISSN
- 0098-1273 (ISSN-L)
- 1542-9385
- OpenAlex
- W2072736778
- Cited by
- 188
- References
- 0
- FWCI
- 1.80
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.