Synthesis, crystallization, and morphology of star‐shaped poly(ε‐caprolactone)
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Six‐arm star‐shaped poly(ε‐caprolactone) (sPCL) was successfully synthesized via the ring‐opening polymerization of ε‐caprolactone with a commercial dipentaerythritol as the initiator and stannous octoate (SnOct 2) as the catalyst in bulk at 120 °C. The effects of the molar ratios of both the monomer to the initiator and the monomer to the catalyst on the molecular weight of the polymer were investigated in detail. The molecular weight of the polymer linearly increased with the molar ratio of the monomer to the initiator, and the molecular weight distribution was very low (weight‐average molecular weight/number‐average molecular weight = 1.05–1.24). However, the molar ratio of the monomer to the catalyst had no apparent influence on the molecular weight of the polymer. Differential scanning calorimetry analysis indicated that the maximal melting point, cold crystallization temperature, and degree of crystallinity of the sPCL polymers increased with increasing molecular weight, and crystallinities of different sizes and imperfect crystallization possibly did not exist in the sPCL polymers. Furthermore, polarized optical microscopy analysis indicated that the crystallization rate of the polymers was in the order of linear poly(ε‐caprolactone) (LPCL) > sPCL5 > sPCL1 (sPCL5 had a higher molecular weight than both sPCL1 and LPCL, which had similar molecular weights). Both LPCL and sPCL5 exhibited a good spherulitic morphology with apparent Maltese cross patterns, whereas sPCL1 showed a poor spherulitic morphology. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5449–5457, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Properties of lactic acid based polymers and their correlation with composition
Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461
Controlled Ring-Opening Polymerization: Polymers with designed Macromolecular Architecture
Stridsberg, K. M., Ryner, M., & Albertsson, A.-C. (2002) · Advances in Polymer Science · doi:10.1007/3-540-45734-8_2 · Cited by 375
Nyce, G. W., Glauser, T., Connor, E. F., Möck, A., Waymouth, R. M., & Hedrick, J. L. (2003) · Journal of the American Chemical Society · doi:10.1021/ja021084+ · Cited by 301
Physical Properties, Crystallization, and Spherulite Growth of Linear and 3-Arm Poly(l-lactide)s
Tsuji, H., Miyase, T., Tezuka, Y., & Saha, S. K. (2005) · Biomacromolecules · doi:10.1021/bm049552q · Cited by 148
Lactone End-Capped Poly(ethylene oxide) as a New Building Block for Biomaterials
Rieger, J., Bernaerts, K. V., Du Prez, F. E., Jérôme, R., & Jérôme, C. (2004) · Macromolecules · doi:10.1021/ma048768h · Cited by 62
Cited by
Cameron, D. J. A., & Shaver, M. P. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00091d · Cited by 421
Wang, J., & Dong, C. (2006) · Macromolecular Chemistry and Physics · doi:10.1002/macp.200500546 · Cited by 76
Self-citationWang, J.-L., & Dong, C.-M. (2006) · Polymer · doi:10.1016/j.polymer.2006.02.047 · Cited by 64
Self-citation
Metadata
- Authors
- Wang, J., Wang, L., & Dong, C.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2005-09-30
- Volume
- 43
- Issue
- 22
- Pages
- 5449-5457
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W1989653192
- Cited by
- 52
- References
- 5
- FWCI
- 1.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis, crystallization, and morphology of star‐shaped poly(ε‐caprolactone). https://app.cochat.ai/papers/10.1002/pola.20954
- The paper
- Wang, J., Wang, L., & Dong, C. (2005). Synthesis, crystallization, and morphology of star‐shaped poly(ε‐caprolactone). Journal of Polymer Science Part A: Polymer Chemistry. https://doi.org/10.1002/pola.20954
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.