Metal‐free synthesis of novel biobased dihydroxyl‐terminated aliphatic polyesters as building blocks for thermoplastic polyurethanes
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Using the organic compound 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD) as a catalyst for step‐growth polymerization, a series of well‐defined hydroxyl‐telechelic renewable aliphatic polyesters (including poly(1,3‐propylene adipate); poly(1,4‐butylene adipate); poly(1,12‐dodecylene sebacate); and poly(1,2‐dimethylethylene adipate), PDMEA) were synthesized and studied. PDMEA is a novel polyester, which has not been reported before. The results of 1 H NMR and Matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry indicate that the polymers are fully hydroxyl terminated. From differential scanning calorimetry (DSC) thermograms, we found that the glass transition temperatures (Tg) of these polyesters are below −20 °C. Only a Tg but no melting peak is observed in the DSC curve of the novel PDMEA. This indicates that PDMEA, contrary to the other renewable polyesters, is totally amorphous. Furthermore, using hexamethylene diisocyanate and hexamethylene diamine, poly(ester urethane urea)s (PEUUs) based on PDMEA were successfully synthesized. The Tg of the prepared PEUUs is below 0 °C, and no melting behavior of the soft‐segment is observed. The PEUU, with a flow temperature of over 200 °C, thus behaves as an elastomer at room temperature. Its mechanical properties, such as a relatively low tensile E‐modulus (≈20 MPa) at room temperature and a sufficiently high strain at break (≈560%), make it suitable for use in, for example, biomedical applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organocatalysis: Opportunities and Challenges for Polymer Synthesis
Kiesewetter, M. K., Shin, E. J., Hedrick, J. L., & Waymouth, R. M. (2010) · Macromolecules · doi:10.1021/ma9025948 · Cited by 907
Synthesis and enzymatic degradation of aliphatic copolyesters
Montaudo, G., & Rizzarelli, P. (2000) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(00)00139-7 · Cited by 99
Cited by
Catalysis as an Enabling Science for Sustainable Polymers
Zhang, X., Fevre, M., Jones, G. O., & Waymouth, R. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00329 · Cited by 936
Wang, C., Sun, J., Liu, X., Sudo, A., & Endo, T. (2012) · Green Chemistry · doi:10.1039/c2gc35796h · Cited by 318
Structure–properties relationship of fatty acid-based thermoplastics as synthetic polymer mimics
Maisonneuve, L., Lebarbé, T., Grau, E., & Cramail, H. (2013) · Polymer Chemistry · doi:10.1039/c3py00791j · Cited by 220
Transforming polylactide into value‐added materials
Leibfarth, F. A., Moreno, N., Hawker, A. P., & Shand, J. D. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.26303 · Cited by 139
Metadata
- Authors
- Tang, D., Noordover, B. A. J., Sablong, R. J., & Koning, C. E.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2011-05-11
- Volume
- 49
- Issue
- 13
- Pages
- 2959-2968
- ISSN
- 0887-624X (ISSN-L)
- 1099-0518
- OpenAlex
- W2017746685
- Cited by
- 56
- References
- 2
- FWCI
- 2.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.