The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
High molecular weight poly(ethylene-2,5-furanoate); critical aspects in synthesis and mechanical property determination
Open accessAbstract
Furan-2,5-dicarboxylic acid (FDCA) is a widely advocated renewable substitute for terephthalic acid (TA). Preparation of high molecular weight FDCA based polyesters by an industrially common combination of melt polymerization and subsequent solid state post condensation is described. Ultimately, poly(ethylene 2,5-furanoate) (PEF) with absolute Mn = 83,000 g mol−1 is obtained, determined by triple detection Size Exclusion Chromatography. The bulk polymer properties of FDCA based polyesters, necessary to evaluate their industrial potential were determined the Young's modulus of PEF is determined to be 2450 ± 220 MPa and the maximum stress 35 ± 8 MPa. The influence of crystallinity on the mechanical properties as function of temperature was determined by dynamic mechanical thermal analysis. A detailed differential scanning calorimetry study on the crystallization behavior of high molecular weight PEF allowed to calculate the equilibrium melting temperature (Tm0) of 239.3 and 239.7 °C for the first and second melting peak, respectively. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4191–4199
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bozell, J. J., & Petersen, G. R. (2010) · Green Chemistry · doi:10.1039/b922014c · Cited by 4,566
Melting process and the equilibrium melting temperature of polychlorotrifluoroethylene
Hoffman, J. D., & Weeks, J. J. (1962) · Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry · doi:10.6028/jres.066a.003 · Cited by 1,490
Renewable Chemical Commodity Feedstocks from Integrated Catalytic Processing of Pyrolysis Oils
Vispute, T. P., Zhang, H., Sanna, A., Xiao, R., & Huber, G. W. (2010) · Science · doi:10.1126/science.1194218 · Cited by 1,088
Gandini, A. (1997) · Progress in Polymer Science · doi:10.1016/s0079-6700(97)00004-x · Cited by 668
Gandini, A., Silvestre, A. J. D., Neto, C. P., Sousa, A. F., & Gomes, M. (2009) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.23130 · Cited by 494
Jiang, M., Liu, Q., Zhang, Q., Ye, C., & Zhou, G. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.25859 · Cited by 360
Synthesis and characterization of poly(2,5‐furan dicarboxylate)s based on a variety of diols
Gomes, M., Gandini, A., Silvestre, A. J. D., & Reis, B. (2011) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.24812 · Cited by 351
Zhu, J., Cai, J., Xie, W., Chen, P.-H., Gazzano, M., Scandola, M., & Gross, R. A. (2013) · Macromolecules · doi:10.1021/ma3023298 · Cited by 333
Marand, H., Xu, J., & Srinivas, S. (1998) · Macromolecules · doi:10.1021/ma980747y · Cited by 302
Vouyiouka, S. N., Karakatsani, E. K., & Papaspyrides, C. D. (2005) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2004.11.001 · Cited by 230
Ma, J., Pang, Y., Wang, M., Xu, J., Ma, H., & Nie, X. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15457a · Cited by 186
Synthesis and crystallinity of poly(butylene 2,5-furandicarboxylate)
Ma, J., Yu, X., Xu, J., & Pang, Y. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.022 · Cited by 171
Polyesters Derived from Furan and Tetrahydrofuran Nuclei
Moore, J. A., & Kelly, J. E. (1978) · Macromolecules · doi:10.1021/ma60063a028 · Cited by 163
Shiramizu, M., & Toste, F. D. (2011) · Chemistry – A European Journal · doi:10.1002/chem.201101580 · Cited by 163
Xu, J., Srinivas, S., Marand, H., & Agarwal, P. (1998) · Macromolecules · doi:10.1021/ma980748q · Cited by 146
Poly(ethylene terephthalate) II—Morphological changes on annealing
Roberts, R. C. (1969) · Polymer · doi:10.1016/0032-3861(69)90015-9 · Cited by 142
Accelerating Research into Bio-Based FDCA-Polyesters by Using Small Scale Parallel Film Reactors
Gruter, G. M., Sipos, L., & Dam, M. A. (2011) · Combinatorial Chemistry & High Throughput Screening · doi:10.2174/138620712798868374 · Cited by 114
Isohexide Derivatives from Renewable Resources as Chiral Building Blocks
Wu, J., Eduard, P., Thiyagarajan, S., van Haveren, J., van Es, D. S., Koning, C. E., Lutz, M., & Guerra, C. F. (2011) · ChemSusChem · doi:10.1002/cssc.201100076 · Cited by 106
Isothermal melt-crystallization and melting behavior for three linear aromatic polyesters
Dangseeyun, N., Srimoaon, P., Supaphol, P., & Nithitanakul, M. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(03)00331-9 · Cited by 99
Lepoittevin, B., & Roger, P. (2011) · Wiley eBooks · doi:10.1002/9781118104729.ch4 · Cited by 94
Renewable Rigid Diamines: Efficient, Stereospecific Synthesis of High Purity Isohexide Diamines
Thiyagarajan, S., Gootjes, L., Vogelzang, W., van Haveren, J., Lutz, M., & van Es, D. S. (2011) · ChemSusChem · doi:10.1002/cssc.201100398 · Cited by 63
Self-citationIsothermal crystallization kinetics of commercially important polyalkylene terephthalates
Chisholm, B. J., & Zimmer, J. G. (2000) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(20000523)76:8<1296::aid-app10>3.0.co;2-n · Cited by 63
Chiral building blocks from biomass: 2,5-diamino-2,5-dideoxy-1,4-3,6-dianhydroiditol
Thiyagarajan, S., Gootjes, L., Vogelzang, W., Wu, J., van Haveren, J., & van Es, D. S. (2010) · Tetrahedron · doi:10.1016/j.tet.2010.11.031 · Cited by 61
Self-citationMoore, J. A., & Kelly, J. E. (1979) · Polymer · doi:10.1016/0032-3861(79)90178-2 · Cited by 45
AN IMPROVED HYDROGENATION FOR THE PREPARATION OF TETRAHYDROFURANCIS-2, 5-DICARBOXYLIC ACID
Moore, J. A., & Kelly, J. E. (1972) · Organic Preparations and Procedures International · doi:10.1080/00304947209458279 · Cited by 14
Cited by
Bioplastics for a circular economy
Rosenboom, J.-G., Langer, R., & Traverso, G. (2022) · Nature Reviews Materials · doi:10.1038/s41578-021-00407-8 · Cited by 2,116
Bio-based polymers with performance-advantaged properties
Cywar, R. M., Rorrer, N. A., Hoyt, C. B., Beckham, G. T., & Chen, E. Y.-X. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00363-3 · Cited by 811
Alternative Monomers Based on Lignocellulose and Their Use for Polymer Production
Delidovich, I., Hausoul, P. J. C., Deng, L., Pfützenreuter, R., Rose, M., & Palkovits, R. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00354 · Cited by 773
Progress of Polymers from Renewable Resources: Furans, Vegetable Oils, and Polysaccharides
Gandini, A., Lacerda, T. M., Carvalho, A. J. F., & Trovatti, E. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00264 · Cited by 756
Sousa, A. F., Vilela, C., Fonseca, A. C., Matos, M., Freire, C. S. R., Gruter, G.-J. M., Coelho, J. F. J., & Silvestre, A. J. D. (2015) · Polymer Chemistry · doi:10.1039/c5py00686d · Cited by 700
Metadata
- Authors
- Knoop, R. J. I., Vogelzang, W., van Haveren, J., & van Es, D. S.
- Venue
- Journal of Polymer Science Part A: Polymer Chemistry
- Publisher
- Wiley
- Published
- 2013-07-03
- Volume
- 51
- Issue
- 19
- Pages
- 4191-4199
- ISSN
- 0887-624X (ISSN-L)
- OpenAlex
- W2155891373
- Cited by
- 328
- References
- 25
- FWCI
- 6.83
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.