The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Poly(lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability
Abstract
The thermomechanical properties, morphology, and gas permeability of hybrids prepared with three types of organoclays were compared in detail. Hexadecylamine–montmorillonite (C 16–MMT), dodecyltrimethyl ammonium bromide–montmorillonite (DTA‐MMT), and Cloisite 25A were used as organoclays in the preparation of nanocomposites. From morphological studies using transmission electron microscopy, most clay layers were found to be dispersed homogeneously in the matrix polymer, although some clusters or agglomerated particles were also detected. The initial degradation temperature (at a 2% weight loss) of the poly(lactic acid) (PLA) hybrid films with C 16–MMT and Cloisite 25A decreased linearly with an increasing amount of organoclay. For hybrid films, the tensile properties initially increased but then decreased with the introduction of more of the inorganic phase. The O 2 permeability values for all the hybrids for clay loadings up to 10 wt % were less than half the corresponding values for pure PLA, regardless of the organoclay. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 94–103, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Organic/Inorganic Hybrid Network Materials by the Sol−Gel Approach
Wen, J., & Wilkes, G. L. (1996) · Chemistry of Materials · doi:10.1021/cm9601143 · Cited by 1,170
Engelberg, I., & Kohn, J. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90037-b · Cited by 803
Synthesis and properties of polyimide-clay hybrid films
Yano, K., Usuki, A., & Okada, A. (1997) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(199708)35:11<2289::aid-pola20>3.0.co;2-9 · Cited by 776
Structure and thermal/mechanical properties of poly(l-lactide)-clay blend
Ogata, N., Jimenez, G., Kawai, H., & Ogihara, T. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<389::aid-polb14>3.0.co;2-e · Cited by 469
The Case for Polylactic Acid as a Commodity Packaging Plastic
Sinclair, R. G. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608010880 · Cited by 453
Present and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Tsuji, H., & Ikada, Y. (1998) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19980118)67:3<405::aid-app3>3.0.co;2-q · Cited by 305
(1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00009-5 · Cited by 234
Yang, Y., Zhu, Z., Yin, J., Wang, X., & Qi, Z.-E. (1999) · Polymer · doi:10.1016/s0032-3861(98)00675-2 · Cited by 193
Filling of poly(lactic acid) with native starch
Jacobsen, S., & Fritz, H. G. (1996) · Polymer Engineering & Science · doi:10.1002/pen.10680 · Cited by 162
Physical Properties of Poly(Lactic Acid) and Starch Composites with Various Blending Ratios
Ke, T., & Sun, X. S. (2000) · Cereal Chemistry · doi:10.1094/cchem.2000.77.6.761 · Cited by 161
Miscibility and crystallization behaviour of poly(l-lactide)/poly(p-vinylphenol) blends
Zhang, L., Goh, S. H., & Lee, S. Y. (1998) · Polymer · doi:10.1016/s0032-3861(97)10167-7 · Cited by 149
Ramsay, B. A., Langlade, V., Carreau, P. J., & Ramsay, J. A. (1993) · Applied and Environmental Microbiology · doi:10.1128/aem.59.4.1242-1246.1993 · Cited by 119
Synthetic Biodegradable Polymer Scaffolds
Naughton, G. K., Bartel, R. L., & Mansbridge, J. N. (1997) · Birkhäuser Boston eBooks · doi:10.1007/978-1-4612-4154-6_7 · Cited by 52
Macrocycles, 5. Ring expansion of macrocyclic tin alkoxides with cyclic anhydrides
Kricheldorf, H. R., & Eggerstedt, S. (1999) · Macromolecular Chemistry and Physics · doi:10.1002/(sici)1521-3935(19990301)200:3<661::aid-macp661>3.0.co;2-4 · Cited by 10
Synthesis and characterization of copolymers of 3-n-hexyl thiophene with 3-cyclohexyl thiophene
Somanathan, N., & Wegner, G. (1999) · Acta Polymerica · doi:10.1002/(sici)1521-4044(19990401)50:4<122::aid-apol122>3.0.co;2-x · Cited by 6
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Metadata
- Authors
- Chang, J., An, Y. U., & Sur, G. S.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-11-26
- Volume
- 41
- Issue
- 1
- Pages
- 94-103
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2109856173
- Cited by
- 410
- References
- 21
- FWCI
- 10.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.