The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Poly(lactic acid) nanocomposites with various organoclays. I. Thermomechanical properties, morphology, and gas permeability
Abstract
The thermomechanical properties, morphology, and gas permeability of hybrids prepared with three types of organoclays were compared in detail. Hexadecylamine–montmorillonite (C 16–MMT), dodecyltrimethyl ammonium bromide–montmorillonite (DTA‐MMT), and Cloisite 25A were used as organoclays in the preparation of nanocomposites. From morphological studies using transmission electron microscopy, most clay layers were found to be dispersed homogeneously in the matrix polymer, although some clusters or agglomerated particles were also detected. The initial degradation temperature (at a 2% weight loss) of the poly(lactic acid) (PLA) hybrid films with C 16–MMT and Cloisite 25A decreased linearly with an increasing amount of organoclay. For hybrid films, the tensile properties initially increased but then decreased with the introduction of more of the inorganic phase. The O 2 permeability values for all the hybrids for clay loadings up to 10 wt % were less than half the corresponding values for pure PLA, regardless of the organoclay. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 94–103, 2003
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Synthesis and properties of polyimide–clay hybrid
Yano, K., Usuki, A., Okada, A., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1993.080311009 · Cited by 1,389
Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites
Messersmith, P. B., & Giannelis, E. P. (1995) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1995.080330707 · Cited by 1,217
Organic/Inorganic Hybrid Network Materials by the Sol−Gel Approach
Wen, J., & Wilkes, G. L. (1996) · Chemistry of Materials · doi:10.1021/cm9601143 · Cited by 1,170
Engelberg, I., & Kohn, J. (1991) · Biomaterials · doi:10.1016/0142-9612(91)90037-b · Cited by 803
Synthesis and properties of polyimide-clay hybrid films
Yano, K., Usuki, A., & Okada, A. (1997) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/(sici)1099-0518(199708)35:11<2289::aid-pola20>3.0.co;2-9 · Cited by 776
Structure and thermal/mechanical properties of poly(l-lactide)-clay blend
Ogata, N., Jimenez, G., Kawai, H., & Ogihara, T. (1997) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19970130)35:2<389::aid-polb14>3.0.co;2-e · Cited by 469
The Case for Polylactic Acid as a Commodity Packaging Plastic
Sinclair, R. G. (1996) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329608010880 · Cited by 453
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
Polymer blends and composites from renewable resources
Yu, L., Dean, K., & Li, L. (2006) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.03.002 · Cited by 2,107
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Biobased plastics and bionanocomposites: Current status and future opportunities
Reddy, M. M., Vivekanandhan, S., Misra, M., Bhatia, S. K., & Mohanty, A. K. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.006 · Cited by 1,080
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Multifunctional nanostructured PLA materials for packaging and tissue engineering
Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.05.010 · Cited by 645
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Jiang, L., Zhang, J., & Wolcott, M. P. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.001 · Cited by 396
Clay–Chitosan Nanobrick Walls: Completely Renewable Gas Barrier and Flame-Retardant Nanocoatings
Laufer, G., Kirkland, C., Cain, A. A., & Grunlan, J. C. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2017915 · Cited by 367
Pinto, A. M., Cabral, J., Tanaka, D. A. P., Mendes, A. M., & Magalhães, F. D. (2013) · Polymer International · doi:10.1002/pi.4290 · Cited by 326
Wróblewska-Krepsztul, J., Rydzkowski, T., Borowski, G., Szczypiński, M., Klepka, T., & Thakur, V. K. (2018) · International Journal of Polymer Analysis and Characterization · doi:10.1080/1023666x.2018.1455382 · Cited by 321
Nanocomposites of PLA and PCL based on montmorillonite and sepiolite
Fukushima, K., Tabuani, D., & Camino, G. (2009) · Materials Science and Engineering: C · doi:10.1016/j.msec.2008.11.005 · Cited by 303
Dispersion and characteristics of surfactant modified cellulose whiskers nanocomposites
Bondeson, D., & Oksman, K. (2007) · Composite Interfaces · doi:10.1163/156855407782106519 · Cited by 294
Poly(lactic acid)/organoclay nanocomposites: Thermal, rheological properties and foam processing
Di, Y., Iannace, S., Maio, E. D., & Nicolais, L. (2005) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20366 · Cited by 257
Jullin, A., Sudre, G., Hascoët, N., Chinesta, F., & Espuche, E. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108682 · Cited by 8
Metadata
- Authors
- Chang, J., An, Y. U., & Sur, G. S.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2002-11-26
- Volume
- 41
- Issue
- 1
- Pages
- 94-103
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2109856173
- Cited by
- 410
- References
- 21
- FWCI
- 10.40
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.