The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Thermal analysis of the double‐melting behavior of poly(L‐lactic acid)
Abstract
The melting and crystallization behavior of poly(L‐lactic acid) (PLLA; weight‐average molecular weight = 3 × 10 5) was studied with differential scanning calorimetry (DSC). DSC curves for PLLA samples were obtained at various cooling rates (CRs) from the melt (210 °C). The peak crystallization temperature and the exothermic heat of crystallization determined from the DSC curve decreased almost linearly with increasing log(CR). DSC melting curves for the melt‐crystallized samples were obtained at various heating rates (HRs). The double‐melting behavior was confirmed by the double endothermic peaks, a high‐temperature peak (H) and a low‐temperature peak (L), that appeared in the DSC curves at slow HRs for the samples prepared with a slow CR. Peak L increased with increasing HR, whereas peak H decreased. The peak melting temperatures of L and H [Tm(L) and Tm(H)] decreased linearly with log(HR). The appearance region of the double‐melting peaks (L and H) was illustrated in a CR–HR map. Peak L decreased with increasing CR, whereas peak H increased. Tm(L) and Tm(H) decreased almost linearly with log(CR). The characteristics of the crystallization and double‐melting behavior were explained by the slow rates of crystallization and recrystallization, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 25–32, 2004
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
(1980) · Elsevier eBooks · doi:10.1016/c2009-0-22032-0 · Cited by 864
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres
Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 607
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Cheng, S. Z. D., Cao, M. Y., & Wunderlich, B. (1986) · Macromolecules · doi:10.1021/ma00161a015 · Cited by 434
General crystallization behaviour of poly(l-lactic acid)
Kalb, B., & Pennings, A. J. (1980) · Polymer · doi:10.1016/0032-3861(80)90315-8 · Cited by 421
Crystallization kinetics of poly(l-lactic acid)
Vasanthakumari, R., & Pennings, A. J. (1983) · Polymer · doi:10.1016/0032-3861(83)90129-5 · Cited by 406
On crystallization phenomena in PEEK☆
BASSETT, D., OLLEY, R., & ALRAHEIL, I. (1988) · Polymer · doi:10.1016/0032-3861(88)90386-2 · Cited by 386
The melting behaviour of heat crystallized poly(ethylene terephthalate)
Holdsworth, P. J., & Turner-Jones, A. (1971) · Polymer · doi:10.1016/0032-3861(71)90045-0 · Cited by 357
Melting behavior of poly(butylene succinate) during heating scan by DSC
Yoo, E. S., & Im, S. S. (1999) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19990701)37:13<1357::aid-polb2>3.0.co;2-q · Cited by 281
Biodegradable fibres of poly(l-lactic acid) produced by melt spinning
Fambri, L., Pegoretti, A., Fenner, R., Incardona, S. D., & Migliaresi, C. (1997) · Polymer · doi:10.1016/s0032-3861(96)00486-7 · Cited by 274
Verma, R., Marand, H., & Hsiao, B. (1996) · Macromolecules · doi:10.1021/ma951727o · Cited by 262
Isothermal crystallization and chain mobility of poly(L-lactide)
Iannace, S., & Nicolais, L. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19970502)64:5<911::aid-app11>3.0.co;2-w · Cited by 240
Glass transition and melting behavior of poly(thio-1,4-phenylene)
Cheng, S. Z. D., Wu, Z. Q., & Wunderlich, B. (1987) · Macromolecules · doi:10.1021/ma00177a028 · Cited by 222
Sauer, B. B., Kampert, W. G., Neal Blanchard, E., Threefoot, S. A., & Hsiao, B. S. (2000) · Polymer · doi:10.1016/s0032-3861(99)00258-x · Cited by 218
Thermal properties and physical ageing of poly (l-lactic acid)
Celli, A., & Scandola, M. (1992) · Polymer · doi:10.1016/0032-3861(92)90440-8 · Cited by 188
Yasuniwa, M., & Satou, T. (2002) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10298 · Cited by 183
Self-citationMelting and Crystallization of Poly(L-lactic acid) and Poly(ethylene oxide) Binary Mixture
Nakafuku, C., & Sakoda, M. (1993) · Polymer Journal · doi:10.1295/polymj.25.909 · Cited by 140
Self-citationHigh speed melt spinning of poly(L-lactic acid) filaments
Mezghani, K., & Spruiell, J. E. (1998) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19980430)36:6<1005::aid-polb9>3.0.co;2-v · Cited by 125
Origin of double melting peaks in drawn nylon 6 yarns
Todoki, M., & Kawaguchi, T. (1977) · Journal of Polymer Science Polymer Physics Edition · doi:10.1002/pol.1977.180150613 · Cited by 122
Multiple melting endotherms of poly(ethylene terephthalate)
Zhou, C.-X., & Clough, S. B. (1988) · Polymer Engineering and Science · doi:10.1002/pen.760280202 · Cited by 120
Structure development and biodegradability of uniaxially stretched poly(l-lactide)
Lee, J. K., Lee, K. H., & Jin, B. S. (2001) · European Polymer Journal · doi:10.1016/s0014-3057(00)00213-5 · Cited by 85
X‐ray studies on the double melting behavior of poly(butylene terephthalate)
Yasuniwa, M., Tsubakihara, S., Ohoshita, K., & Tokudome, S. (2001) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.1176 · Cited by 84
Self-citationMelting behaviour of poly (phenylene sulphide): 2. Multiple stage melt crystallization
Chung, J. S., & Cebe, P. (1992) · Polymer · doi:10.1016/0032-3861(92)90523-y · Cited by 62
Mechanical properties and structure of the zone-drawn poly(L-lactic acid) fibers
Okuzaki, H., Kubota, I., & Kunugi, T. (1999) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/(sici)1099-0488(19990515)37:10<991::aid-polb4>3.0.co;2-t · Cited by 49
High Pressure Crystallization of Poly(L-lactic acid) in a Binary Mixture with Poly(ethylene oxide)
Nakafuku, C. (1994) · Polymer Journal · doi:10.1295/polymj.26.680 · Cited by 38
Self-citationX-ray and DSC studies on the melt-recrystallization process of poly(butylene naphthalate)
Yasuniwa, M., Tsubakihara, S., & Fujioka, T. (2003) · Thermochimica Acta · doi:10.1016/s0040-6031(02)00531-2 · Cited by 33
Self-citation
Cited by
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
The thermal effects on electrospinning of polylactic acid melts
Zhou, H., Green, T. B., & Joo, Y. L. (2006) · Polymer · doi:10.1016/j.polymer.2006.08.042 · Cited by 399
Insights into polymer crystallization and melting from fast scanning chip calorimetry
Toda, A., Androsch, R., & Schick, C. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.038 · Cited by 273
Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Metadata
- Authors
- Yasuniwa, M., Tsubakihara, S., Sugimoto, Y., & Nakafuku, C.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2003-12-03
- Volume
- 42
- Issue
- 1
- Pages
- 25-32
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2141761639
- Cited by
- 375
- References
- 29
- FWCI
- 5.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.