The DOI matches its Crossref record.
Gas barrier properties of poly(ε‐caprolactone)/clay nanocomposites: Influence of the morphology and polymer/clay interactions
Abstract
Poly(ε‐caprolactone)/montmorillonite nanocomposites were prepared maintaining a constant inorganic content with three means: melt blending of poly(ε‐caprolactone) with natural or organomodified clays, in situ polymerization of ε‐caprolactone in the presence of organomodified clays, and initiation of ε‐caprolactone polymerization from the silicate layer with appropriate organomodified montmorillonites and activator. In this last case, the polymer chains were grafted to the silicate layers and it was possible to tune up the grafting density. The presence of clays did not modify the polymer crystallinity. It was shown that the in situ polymerization process from the clay surface improved the clay dispersion. The gas barrier properties of the different composite systems were discussed both as a function of the clay dispersion and of the matrix/clay interactions. The highest barrier properties were obtained for an exfoliated morphology and the highest grafting density. Similar evolution of the permeability and the diffusion coefficients was observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 205–214, 2005
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Gas barrier performance of graphene/polymer nanocomposites
Cui, Y., Kundalwal, S. I., & Kumar, S. (2016) · Carbon · doi:10.1016/j.carbon.2015.11.018 · Cited by 715
Graphene and graphene oxide and their uses in barrier polymers
Yoo, B. M., Shin, H. J., Yoon, H. W., & Park, H. B. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39628 · Cited by 495
A review of the water barrier properties of polymer/clay and polymer/graphene nanocomposites
Tan, B., & Thomas, N. L. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.05.026 · Cited by 350
Progress in nano-biocomposites based on polysaccharides and nanoclays
Chivrac, F., Pollet, E., & Avérous, L. (2009) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2009.09.002 · Cited by 321
Self-citationGas barrier properties of polymer/clay nanocomposites
Cui, Y., Kumar, S., Rao Kona, B., & van Houcke, D. (2015) · RSC Advances · doi:10.1039/c5ra10333a · Cited by 308
Ghanem, A. F., Yassin, M. A., Cosquer, R., Gouanvé, F., Espuche, E., & Abdel Rehim, M. H. (2024) · RSC Advances · doi:10.1039/d3ra08948g · Cited by 26
Self-citationJullin, A., Sudre, G., Hascoët, N., Chinesta, F., & Espuche, E. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108682 · Cited by 8
Self-citation
Metadata
- Authors
- Gain, O., Espuche, E., Pollet, E., Alexandre, M., & Dubois, P.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2004-12-06
- Volume
- 43
- Issue
- 2
- Pages
- 205-214
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2152496538
- Cited by
- 191
- References
- 0
- FWCI
- 6.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.