Crystal density and heat of fusion for a stereo‐complex of poly(L‐lactic acid) and poly(D‐lactic acid)
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Measured densities of films, consisting of only stereo‐complex (sc) crystals of poly(l‐lactic acid) (PLLA) and poly(d‐lactic acid) (PDLA), are sometimes significantly higher than the density of the sc‐crystal calculated on the basis of the previously proposed triclinic and trigonal unit cells. In this work, we reexamined the crystal density and determined the heat of fusion for the sc‐crystal. Twenty wide‐angle X‐ray reflections from a highly oriented sc‐film could be well indexed on the basis of a trigonal unit cell previously proposed by Cartier et al. The refined parameters of the trigonal cell are a = b = 1.50 nm, c = 0.823 nm, α = β = 90°, and γ = 120°. The c‐axis determined from the WAXD fiber pattern was significantly shorter than those (0.87–0.93 nm) previously reported. The crystal density of the modified cell was 1.342 ± 0.002 g/cm 3, which was significantly higher than those previously reported (1.21–1.27 g/cm 3). The heat of fusion for the sc‐crystal, extrapolated from the linear increase in the observed heat of fusion with decreasing the specific volume for the samples consisting of only sc‐crystals, was 155 ± 5 J/g. This value was significantly higher than those of α‐form and β‐form homo‐crystals of PLLA suggesting stronger interactions between the 3 2 helices of PLLA and 3 1 helices of PDLA in the sc‐crystal. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2632–2639, 2007
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Tsuji, H., Hyon, S. H., & Ikada, Y. (1991) · Macromolecules · doi:10.1021/ma00020a026 · Cited by 334
Self-citationThe frustrated structure of poly( l -lactide)
Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333
Furuhashi, Y., Kimura, Y., Yoshie, N., & Yamane, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.06.001 · Cited by 127
Cited by
Polymorphism and isomorphism in biodegradable polyesters
Pan, P., & Inoue, Y. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.01.003 · Cited by 611
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Pan, P., Han, L., Bao, J., Xie, Q., Shan, G., & Bao, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b03546 · Cited by 231
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Huang, Y., Chang, R., Han, L., Shan, G., Bao, Y., & Pan, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00855 · Cited by 87
Metadata
- Authors
- Sawai, D., Tsugane, Y., Tamada, M., Kanamoto, T., Sungil, M., & Hyon, S.
- Venue
- Journal of Polymer Science Part B: Polymer Physics
- Publisher
- Wiley
- Published
- 2007-08-06
- Volume
- 45
- Issue
- 18
- Pages
- 2632-2639
- ISSN
- 0887-6266 (ISSN-L)
- 1099-0488
- OpenAlex
- W2142373214
- Cited by
- 114
- References
- 4
- FWCI
- 3.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.