Tailoring crystallization: towards high-performance poly(lactic acid)

An Overview of Polylactides as Packaging Materials

Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454 · see citing works

The Halpin‐Tsai equations: A review

Halpin, J. C., & Kardos, J. L. (1976) · Polymer Engineering and Science · doi:10.1002/pen.760160512 · Cited by 3,085 · see citing works

Processing technologies for poly(lactic acid)

Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766 · see citing works

An overview of the recent developments in polylactide (PLA) research

Madhavan Nampoothiri, K., Nair, N. R., & John, R. P. (2010) · Bioresource Technology · doi:10.1016/j.biortech.2010.05.092 · Cited by 2,448 · see citing works

Poly(lactic acid) modifications

Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204 · see citing works

Poly(lactic acid) crystallization

Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606 · see citing works

Properties of lactic acid based polymers and their correlation with composition

Södergård, A., & Stolt, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00012-6 · Cited by 1,461 · see citing works

Stereocomplex formation between enantiomeric poly(lactides)

Ikada, Y., Jamshidi, K., Tsuji, H., & Hyon, S. H. (1987) · Macromolecules · doi:10.1021/ma00170a034 · Cited by 1,409 · see citing works

Poly(lactic acid) fiber: An overview

Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360 · see citing works

Stereocomplex Formation between Enantiomeric Poly(lactide)s

박은하, & 진인주 (2010) · 한국고분자학회 학술대회 연구논문 초록집 · Cited by 1,084 · see citing works

Disorder-to-Order Phase Transition and Multiple Melting Behavior of Poly(<scp>l</scp>-lactide) Investigated by Simultaneous Measurements of WAXD and DSC

Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913 · see citing works

Crystal Modifications and Thermal Behavior of Poly( <scp>l</scp> -lactic acid) Revealed by Infrared Spectroscopy

Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893 · see citing works

Crystal structure, conformation and morphology of solution-spun poly(L-lactide) fibers

Hoogsteen, W., Postema, A. R., Pennings, A. J., ten Brinke, G., & Zugenmaier, P. (1990) · Macromolecules · doi:10.1021/ma00204a041 · Cited by 865 · see citing works

Effect of nucleation and plasticization on the crystallization of poly (lactic acid)

Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810 · see citing works

Solubility of gases in polyethylene

Michaels, A. S., & Bixler, H. J. (1961) · Journal of Polymer Science · doi:10.1002/pol.1961.1205015411 · Cited by 663 · see citing works

Crystallization and Melting Behavior of Poly ( <scp>l</scp> -lactic Acid)

Kawai, T., Rahman, N., Matsuba, G., Nishida, K., Kanaya, T., Nakano, M., Okamoto, H., Kawada, J., Usuki, A., Honma, N., et al. (2007) · Macromolecules · doi:10.1021/ma070082c · Cited by 636 · see citing works

Biodegradable materials of poly(l-lactic acid): 1. Melt-spun and solution-spun fibres

Eling, B., Gogolewski, S., & Pennings, A. J. (1982) · Polymer · doi:10.1016/0032-3861(82)90176-8 · Cited by 606 · see citing works

Molecular conformation of poly(S‐lactic acid)

Santis, P. D., & Kovacs, A. J. (1968) · Biopolymers · doi:10.1002/bip.1968.360060305 · Cited by 575 · see citing works

Epitaxial crystallization and crystalline polymorphism of polylactides

Cartier, L. E., Okihara, T., Ikada, Y., Tsuji, H., Puiggalı́, J., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00234-2 · Cited by 560 · see citing works

Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s

Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547 · see citing works

Stereocomplex formation between enantiomeric poly(lactic acid)s. XI. Mechanical properties and morphology of solution-cast films

Tsuji, H., & Ikada, Y. (1999) · Polymer · doi:10.1016/s0032-3861(99)00004-x · Cited by 545 · see citing works

Crystallization, structure and properties of plasticized poly(l-lactide)

Kulinski, Z., & Piórkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 542 · see citing works

Crystallization Behavior and Morphology of Biodegradable Polylactide/Layered Silicate Nanocomposite

Nam, J. Y., Sinha Ray, S., & Okamoto, M. (2003) · Macromolecules · doi:10.1021/ma034623j · Cited by 429 · see citing works

Crystal structure of stereocomplex of poly(L-lactide) and poly(D-lactide)

Okihara, T., Tsuji, M., Kawaguchi, A., Katayama, K.-I., Tsuji, H., Hyon, S.-H., & Ikada, Y. (1991) · Journal of Macromolecular Science Part B · doi:10.1080/00222349108245788 · Cited by 382 · see citing works

Melt–solid polycondensation of lactic acid and its biodegradability

Maharana, T., Mohanty, B., & Negi, Y. S. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.001 · Cited by 368 · see citing works

Mechanical, Physical, and Barrier Properties of Poly(Lactide) Films

Auras, R. A., Harte, B., Selke, S. E. M., & Hernández, R. J. (2003) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087903039702 · Cited by 346 · see citing works

The frustrated structure of poly( l -lactide)

Puiggali, J., Ikada, Y., Tsuji, H., Cartier, L., Okihara, T., & Lotz, B. (2000) · Polymer · doi:10.1016/s0032-3861(00)00235-4 · Cited by 333 · see citing works

Plasticization of Poly(<scp>l</scp>-lactide) with Poly(propylene glycol)

Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M. (2006) · Biomacromolecules · doi:10.1021/bm060089m · Cited by 320 · see citing works

Influence of crystal polymorphism on mechanical and barrier properties of poly(l-lactic acid)

Cocca, M., Lorenzo, M. L. D., Malinconico, M., & Frezza, V. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.02.009 · Cited by 296 · see citing works

Triangular Polymer Single Crystals: Stereocomplexes, Twins, and Frustrated Structures

Cartier, L., Okihara, T., & Lotz, B. (1997) · Macromolecules · doi:10.1021/ma9707998 · Cited by 273 · see citing works

Aging of poly(lactide)/poly(ethylene glycol) blends. Part 1. Poly(lactide) with low stereoregularity

Hu, Y., Rogunova, M., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00614-1 · Cited by 261 · see citing works

Unusual Crystallization Behavior of Organoclay Reinforced Poly( l -lactic acid) Nanocomposites

Krikorian, V., & Pochan, D. J. (2004) · Macromolecules · doi:10.1021/ma049283w · Cited by 241 · see citing works

Structure versus properties relationship of poly(lactic acid). I. Effect of crystallinity on barrier properties

Drieskens, M., Peeters, R., Mullens, J., Franco, D., Lemstra, P. J., & Hristova-Bogaerds, D. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21822 · Cited by 239 · see citing works

Effects of annealing time and temperature on the crystallinity and heat resistance behavior of injection‐molded poly(lactic acid)

Srithep, Y., Nealey, P. F., & Turng, L. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23304 · Cited by 223 · see citing works

Crystal structure and disorder in Poly(l-lactic acid) δ form (α′ form) and the phase transition mechanism to the ordered α form

Wasanasuk, K., & Tashiro, K. (2011) · Polymer · doi:10.1016/j.polymer.2011.10.046 · Cited by 215 · see citing works

Crystallinity and mechanical properties of optically pure polylactides and their blends

Sarasua, J. R., Arraiza, A. L., Balerdi, P., & Maiza, I. (2005) · Polymer Engineering &amp; Science · doi:10.1002/pen.20331 · Cited by 214 · see citing works

Crystallization Behavior of Poly( l -lactic acid) Nanocomposites: Nucleation and Growth Probed by Infrared Spectroscopy

Krikorian, V., & Pochan, D. J. (2005) · Macromolecules · doi:10.1021/ma050739z · Cited by 214 · see citing works

Crystal Structure of the α-Form of Poly( l -lactide)

Alemán, C., Lotz, B., & Puiggalı́, J. (2001) · Macromolecules · doi:10.1021/ma001630o · Cited by 201 · see citing works

Melting behavior and crystallization kinetics of starch and poly(lactic acid) composites

Ke, T., & Sun, X. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12162 · Cited by 200 · see citing works

Effect of water on the oxygen barrier properties of poly(ethylene terephthalate) and polylactide films

Auras, R., Harte, B., & Selke, S. (2004) · Journal of Applied Polymer Science · doi:10.1002/app.20148 · Cited by 190 · see citing works

The crystallization behavior and mechanical properties of polylactic acid in the presence of a crystal nucleating agent

Tang, Z.-B., Zhang, C., Liu, X.-Q., & Zhu, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.34799 · Cited by 157 · see citing works

Stereocomplex formation between enantiomeric poly(lactic acid). VIII. Complex fibers spun from mixed solution of poly( D ‐lactic acid) and poly( L ‐lactic acid)

Tsuji, H., Ikada, Y., Hyon, S., Kimura, Y., & Kitao, T. (1994) · Journal of Applied Polymer Science · doi:10.1002/app.1994.070510216 · Cited by 152 · see citing works

Analysis of permeability; solubility and diffusivity of carbon dioxide; oxygen; and nitrogen in crystalline and liquid crystalline polymers

Kanehashi, S., Kusakabe, A., Satō, S., & Nagai, K. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.08.035 · Cited by 141 · see citing works

Water vapor permeability of poly(lactide)s: Effects of molecular characteristics and crystallinity

Tsuji, H., Okino, R., Daimon, H., & Fujie, K. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.22698 · Cited by 136 · see citing works

Higher-order structures and mechanical properties of stereocomplex-type poly(lactic acid) melt spun fibers

Furuhashi, Y., Kimura, Y., Yoshie, N., & Yamane, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.06.001 · Cited by 127 · see citing works

Water barrier properties in biaxially drawn poly(lactic acid) films.

Delpouve, N., Stoclet, G., Saiter, A., Dargent, E., & Marais, S. (2012) · Journal of Physical Chemistry B · doi:10.1021/jp211670g · Cited by 124 · see citing works

Shear-Induced Nucleation and Morphological Evolution for Bimodal Long Chain Branched Polylactide

Fang, H., Zhang, Y., Bai, J., & Wang, Z. (2013) · Macromolecules · doi:10.1021/ma4012126 · Cited by 120 · see citing works

Crystal density and heat of fusion for a stereo‐complex of poly( L ‐lactic acid) and poly( D ‐lactic acid)

Sawai, D., Tsugane, Y., Tamada, M., Kanamoto, T., Sungil, M., & Hyon, S. (2007) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21270 · Cited by 114 · see citing works

Rapid crystallization of poly(l-lactic acid) induced by a nanoscaled zinc citrate complex as nucleating agent

Song, P., Chen, G., Wei, Z., Chang, Y., Zhang, W., & Liang, J. (2012) · Polymer · doi:10.1016/j.polymer.2012.07.032 · Cited by 109 · see citing works

Impact of crystallinity of poly(lactide) on helium and oxygen barrier properties

Guinault, A., Sollogoub, C., Ducruet, V., & Domenek, S. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.01.014 · Cited by 107 · see citing works

Structure variation of tensile-deformed amorphous poly(l-lactic acid): Effects of deformation rate and strain

Zhang, X., Schneider, K., Liu, G., Chen, J., Brüning, K., Wang, D., & Stamm, M. (2011) · Polymer · doi:10.1016/j.polymer.2011.07.003 · Cited by 106 · see citing works

Oxygen transport as a solid‐state structure probe for polymeric materials: A review

Hiltner, A., Liu, R. Y. F., Hu, Y. S., & Baer, E. (2005) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.20349 · Cited by 103 · see citing works

Phase-structure and mechanical properties of isothermally melt-and cold-crystallized poly (L-lactide)

Lizundia, E., Petisco-Ferrero, S., & Sarasua, J.-R. (2012) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2012.09.006 · Cited by 101 · see citing works

Barrier properties of poly(lactic acid) and its morphological changes induced by aroma compound sorption

Colomines, G., Ducruet, V., Courgneau, C., Guinault, A., & Domenek, S. (2010) · Polymer International · doi:10.1002/pi.2793 · Cited by 93 · see citing works

Low-molecular weight aliphatic amides as nucleating agents for poly (L-lactic acid): Conformation variation induced crystallization enhancement

Xing, Q., Zhang, X., Dong, X., Liu, G., & Wang, D. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.034 · Cited by 93 · see citing works

Development of Stereocomplex Crystal of Polylactide in High-Speed Melt Spinning and Subsequent Drawing and Annealing Processes

Takasaki, M., Itô, H., & Kikutani, T. (2003) · Journal of Macromolecular Science Part B · doi:10.1081/mb-120021570 · Cited by 93 · see citing works

Crystal structure and morphology influenced by shear effect of poly(l-lactide) and its melting behavior revealed by WAXD, DSC and in-situ POM

Huang, S., Li, H., Jiang, S., Chen, X., & An, L. (2011) · Polymer · doi:10.1016/j.polymer.2011.05.044 · Cited by 91 · see citing works

Crystallization improvement of poly(L‐lactide) induced by functionalized multiwalled carbon nanotubes

Li, Y.-L., Wang, Y., Liu, L., Han, L., Xiang, F., & Zhou, Z.-W. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21645 · Cited by 84 · see citing works

Effect of crystallization on barrier properties of formulated polylactide

Courgneau, C., Domenek, S., Lebossé, R., Guinault, A., Avérous, L., & Ducruet, V. (2012) · Polymer International · doi:10.1002/pi.3167 · Cited by 84 · see citing works

Rheologically Determined Critical Shear Rates for Shear-Induced Nucleation Rate Enhancements of Poly(lactic acid)

Zhong, Y., Fang, H., Zhang, Y., Wang, Z., Yang, J., & Wang, Z. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400040b · Cited by 84 · see citing works

Temperature dependence of crystalline transition of highly-oriented poly(l-lactide)/poly(d-lactide) blend: In-situ synchrotron X-ray scattering study

Xiong, Z., Liu, G., Zhang, X., Wen, T., de Vos, S., Joziasse, C., & Wang, D. (2013) · Polymer · doi:10.1016/j.polymer.2012.11.076 · Cited by 83 · see citing works

Deformation-mediated superstructures and cavitation of poly (l-lactide): In-situ small-angle X-ray scattering study

Zhang, X., Schneider, K., Liu, G., Chen, J., Brüning, K., Wang, D., & Stamm, M. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.002 · Cited by 80 · see citing works

Time resolved study of oriented crystallisation of poly(lactic acid) during rapid tensile deformation

Mahendrasingam, A., Blundell, D. J., Parton, M., Wright, A. K., Rasburn, J., Narayanan, T., & Fuller, W. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.081 · Cited by 77 · see citing works

Nucleation Effects of Nucleobases on the Crystallization Kinetics of Poly( L ‐lactide)

Pan, P., Yang, J., Shan, G., Bao, Y., Weng, Z., & Inoue, Y. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100266 · Cited by 60 · see citing works

Crystallization of polylactide films: An atomic force microscopy study of the effects of temperature and blending

Yuryev, Y., Wood‐Adams, P. M., Heuzey, M., Dubois, C., & Brisson, J. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.023 · Cited by 56 · see citing works

Synthesis and Substrate-Aided Alignment of Porphyrinated Poly(ethylene oxide) (PEO) Electrospun Nanofibers

Abiona, A. A., Chigome, S., Ajao, J. A., Fasasi, A. Y., Torto, N., Osinkolu, G. A., & Mâaza, M. (2010) · International Journal of Polymeric Materials · doi:10.1080/00914037.2010.483221 · Cited by 48 · see citing works

Nonisothermal crystallization kinetics of poly(lactide)—effect of plasticizers and nucleating agent

Courgneau, C., Ducruet, V., Avérous, L., Grenet, J., & Domenek, S. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23357 · Cited by 46 · see citing works

Non-isothermal crystallization of poly(L-lactide) (PLLA) under quiescent and steady shear conditions

Li, X., Zhong, G., & Li, Z. (2010) · Chinese Journal of Polymer Science · doi:10.1007/s10118-010-9015-z · Cited by 45 · see citing works

Influences of the crystallisation rate on thermal and barrier properties of polylactide acid (PLA) food packaging films

Colomines, G., Domenek, S., Ducruet, V., & Guinault, A. (2008) · International Journal of Material Forming · doi:10.1007/s12289-008-0329-0 · Cited by 44 · see citing works

Steady–shear‐induced Isothermal Crystallization of Poly( L ‐lactide) (PLLA)

Li, X., Li, Z., Zhong, G., & Li, L. (2008) · Journal of Macromolecular Science Part B · doi:10.1080/00222340801955313 · Cited by 43 · see citing works

Formation and morphology of “shish-like” fibril crystals of aliphatic polyesters from the sheared melt

Yamazaki, S., Itoh, M., Oka, T., & Kimura, K. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.09.003 · Cited by 41 · see citing works

T g Depression in Poly( l (−)-lactide) Crystallized under Partially Constrained Conditions

Fitz, B. D., Jamiolkowski, D. D., & Andjelić, S. (2002) · Macromolecules · doi:10.1021/ma020436u · Cited by 38 · see citing works

The inexistence of epitaxial relationship between stereocomplex and α crystal of poly(lactic acid): Direct experimental evidence

Wen, T., Xiong, Z., Liu, G., Zhang, X., de Vos, S., Wang, R., Joziasse, C. A. P., Wang, F., & Wang, D. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.010 · Cited by 36 · see citing works

Untitled work

Schmidt (2001) · doi:10.1002/1099-0488(20010201)39:3

Polylactic Acid Technology

Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23

Untitled work

Perego (1998) · doi:10.1002/(sici)1097-4628(19960103)59:1

Preparation methods and applications of chitosan nanoparticles; with an outlook toward reinforcement of biodegradable packaging

Yanat, M., & Schroën, K. G. P. H. (2021) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2021.104849 · Cited by 460 · see citing works

Super tough poly(lactic acid) blends: a comprehensive review

Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465 · see citing works

Enhancing the interlayer tensile strength of 3D printed short carbon fiber reinforced PETG and PLA composites via annealing

Bhandari, S., Lopez-Anido, R. A., & Gardner, D. J. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100922 · Cited by 362 · see citing works

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

Fortelny, I., Ujcic, A., Fambri, L., & Slouf, M. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00206 · Cited by 238 · see citing works

Crystallization of biodegradable and biobased polyesters: Polymorphism, cocrystallization, and structure-property relationship

Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229 · see citing works

Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?

Razavi, M., & Wang, S.-Q. (2019) · Macromolecules · doi:10.1021/acs.macromol.9b00595 · Cited by 212 · see citing works

Recent progress on chemical modification of cellulose for high mechanical-performance Poly(lactic acid)/Cellulose composite: A review

Zhou, L., Ke, K., Yang, M., & Yang, W. M. (2020) · Composites Communications · doi:10.1016/j.coco.2020.100548 · Cited by 207 · see citing works

PLLA-grafted cellulose nanocrystals: Role of the CNC content and grafting on the PLA bionanocomposite film properties

Lizundia, E., Fortunati, E., Dominici, F., Vilas‐Vilela, J. L., León, L. M., Armentano, I., Torre, L., & Kenny, J. M. (2016) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2016.01.041 · Cited by 205 · see citing works

Recent Advances in Processing of Stereocomplex‐Type Polylactide

Bai, H., Deng, S., Bai, D., Zhang, Q., & Fu, Q. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700454 · Cited by 202 · see citing works

Bioresorbable stents: Current and upcoming bioresorbable technologies.

Hui, Y.-A., Bulluck, H., Wong, P., Venkatraman, S., Huang, Y.-Y., & Foin, N. (2017) · International Journal of Cardiology · doi:10.1016/j.ijcard.2016.11.258 · Cited by 135 · see citing works

Influence of α′-/α-crystal polymorphism on properties of poly(l-lactic acid)

Lorenzo, M. D. D., & Androsch, R. (2018) · Polymer international · doi:10.1002/pi.5707 · Cited by 134 · see citing works

The crystallization behavior of poly(lactic acid) with different types of nucleating agents

Feng, Y., Ma, P., Xu, P., Wang, R., Dong, W., Chen, M., & Joziasse, C. A. P. (2017) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.08.095 · Cited by 138 · see citing works

Stereocomplex crystallization of high-molecular-weight poly(l-lactic acid)/poly(d-lactic acid) racemic blends promoted by a selective nucleator

Han, L., Pan, P., Shan, G., & Bao, Y. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.053 · Cited by 136 · see citing works

Super-Robust Polylactide Barrier Films by Building Densely Oriented Lamellae Incorporated with Ductile in Situ Nanofibrils of Poly(butylene adipate-co-terephthalate).

Zhou, S., Huang, H.-D., Ji, X., Yan, D.-X., Zhong, G.-J., Hsiao, B., & Li, Z.-M. (2016) · ACS Applied Materials and Interfaces · doi:10.1021/acsami.6b00451 · Cited by 121 · see citing works

Polymorphic Crystalline Structure and Crystal Morphology of Enantiomeric Poly(lactic acid) Blends Tailored by a Self-Assemblable Aryl Amide Nucleator

Xie, Q. M., Han, L., Shan, G., Bao, Y., & Pan, P. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00191 · Cited by 128 · see citing works

Highly Enhanced Crystallization Kinetics of Poly( l -lactic acid) by Poly(ethylene glycol) Grafted Graphene Oxide Simultaneously as Heterogeneous Nucleation Agent and Chain Mobility Promoter

Xu, J., Zhang, Z., Xu, H., Chen, J.-B., Ran, R., & Li, Z. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00462 · Cited by 117 · see citing works

Dominant β-Form of Poly( l -lactic acid) Obtained Directly from Melt under Shear and Pressure Fields

Ru, J., Yang, S.-G., Zhou, D., Yin, H., Lei, J., & Li, Z. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00595 · Cited by 115 · see citing works

The influence of the functional end groups on the properties of polylactide-based materials

Kost, B., Baśko, M., Bednarek, M., Socka, M., Kopka, B., Łapienis, G., Biela, T., Kubisa, P., & Brzeziński, M. (2022) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2022.101556 · Cited by 115 · see citing works

Favorable formation of stereocomplex crystals in poly( l -lactide)/poly( d -lactide) blends by selective nucleation

Xiong, Z., Zhang, X., Wang, R., de Vos, S., Wang, R., Joziasse, C. A. P., & Wang, D. (2015) · Polymer · doi:10.1016/j.polymer.2015.08.056 · Cited by 107 · see citing works

Enhanced Heat Deflection Resistance via Shear Flow-Induced Stereocomplex Crystallization of Polylactide Systems

Zhang, Z., Sang, Z., Huang, Y., Ru, J., Zhong, G., Ji, X., Wang, R., & Li, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02438 · Cited by 105 · see citing works

A Flexible and Biodegradable Piezoelectric‐Based Wearable Sensor for Non‐Invasive Monitoring of Dynamic Human Motions and Physiological Signals

Ali, M., Hoseyni, S. M., Das, R., Awais, M., Basdogan, I., & Beker, L. (2023) · Advanced Materials Technologies · doi:10.1002/admt.202300347 · Cited by 106 · see citing works

Interfacial Shish-Kebabs Lengthened by Coupling Effect of In Situ Flexible Nanofibrils and Intense Shear Flow: Achieving Hierarchy To Conquer the Conflicts between Strength and Toughness of Polylactide

Zhou, S., Niu, B., Xie, X.-L., Ji, X., Zhong, G., Hsiao, B. S., & Li, Z. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b00479 · Cited by 102 · see citing works

Exclusive Stereocomplex Crystallization of Linear and Multiarm Star-Shaped High-Molecular-Weight Stereo Diblock Poly(lactic acid)s

Han, L., Shan, G., Bao, Y., & Pan, P. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b06757 · Cited by 95 · see citing works

Effect of different sterilization methods on the properties of commercial biodegradable polyesters for single-use, disposable medical devices

Zhao, Y., Zhu, B., Wang, Y., Liu, C., & Shen, C. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110041 · Cited by 93 · see citing works

Direct investigations on strain-induced cold crystallization behavior and structure evolutions in amorphous poly(lactic acid) with SAXS and WAXS measurements

Zhou, C., Li, H., Zhang, W., Li, J., Huang, S., Meng, Y., Christiansen, J. D., Yu, D., Wu, Z., & Jiang, S. (2016) · Polymer · doi:10.1016/j.polymer.2016.03.014 · Cited by 85 · see citing works

Polylactic Acid Piezo-Biopolymers: Chemistry, Structural Evolution, Fabrication Methods, and Tissue Engineering Applications

Farahani, A., Zarei-Hanzaki, A., Abedi, H. R., Tayebi, L., & Mostafavi, E. (2021) · Journal of Functional Biomaterials · doi:10.3390/jfb12040071 · Cited by 77 · see citing works

Enhancing Thermomechanical Properties and Heat Distortion Resistance of Poly( l -lactide) with High Crystallinity under High Cooling Rate

Yin, H., Wei, X., Bao, R., Dong, Q., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500783s · Cited by 82 · see citing works

Modification of Cellulose Micro- and Nanomaterials to Improve Properties of Aliphatic Polyesters/Cellulose Composites: A Review

Stepanova, M., & Korzhikova‐Vlakh, E. (2022) · Polymers · doi:10.3390/polym14071477 · Cited by 82 · see citing works

Polylactic Acid (PLA) Melt-Blown Nonwovens with Superior Mechanical Properties

Liu, G., Guan, J., Wang, X., Yu, J., & Ding, B. (2023) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.3c00159 · Cited by 82 · see citing works

Poly(Lactic Acid): Recent Stereochemical Advances and New Materials Engineering

Hu, C., Zhang, Y., Pang, X., & Chen, X. (2024) · Advanced Materials · doi:10.1002/adma.202412185 · Cited by 81 · see citing works

The effect of surface modification of glass fiber on the performance of poly(lactic acid) composites: Graphene oxide vs. silane coupling agents

Jing, M., Che, J., Xu, S., Liu, Z., & Fu, Q. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.11.134 · Cited by 77 · see citing works

Enhancement of stereocomplex formation in poly(l-lactide)/poly(d-lactide) mixture by shear

Song, Y. L., Zhang, X., Yin, Y., de Vos, S., Wang, R., Joziasse, C. A. P., Liu, G., & Wang, D. (2015) · Polymer · doi:10.1016/j.polymer.2015.07.023 · Cited by 72 · see citing works

Physical and mechanical degradation behaviour of semi-crystalline PLLA for bioresorbable stent applications

Polak-Kraśna, K., Abaei, A. R., Shirazi, R. N., Parle, E., Carroll, O., Ronan, W., & Vaughan, T. J. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104409 · Cited by 70 · see citing works

A facile structural manipulation strategy to prepare ultra-strong, super-tough, and thermally stable polylactide/nucleating agent composites

Kuang, T., Ju, J., Liu, T., Hejna, A., Saeb, M. R., Zhang, S., & Peng, X. (2022) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-021-00390-2 · Cited by 67 · see citing works

Cell Morphology and Improved Heat Resistance of Microcellular Poly( l -lactide) Foam via Introducing Stereocomplex Crystallites of PLA

Jia, P., Hu, J., Zhai, W., Duan, Y., Zhang, J., & Han, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504345y · Cited by 63 · see citing works

Click chemistry synthesis, stereocomplex formation, and enhanced thermal properties of well-defined poly( l -lactic acid)- b -poly( d -lactic acid) stereo diblock copolymers

Han, L., Xie, Q. M., Bao, J., Shan, G., Bao, Y., & Pan, P. (2016) · Polymer Chemistry · doi:10.1039/c6py01989g · Cited by 63 · see citing works

Light and gas barrier properties of PLLA/metallic nanoparticles composite films

Lizundia, E., Vilas‐Vilela, J. L., Sangroniz, A., & Etxeberria, A. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.03.043 · Cited by 63 · see citing works

Competing Stereocomplexation and Homocrystallization of Poly( l -lactic acid)/Poly( d -lactic acid) Racemic Mixture: Effects of Miscible Blending with Other Polymers

Bao, J., Xue, X., Li, K., Chang, X., Xie, Q. M., Yu, C., & Pan, P. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b03287 · Cited by 62 · see citing works

Water droplet spreading and imbibition on superhydrophilic poly(butylene terephthalate) melt-blown fiber mats

Wang, Z., Espín, L., Bates, F. S., Kumar, S., & Macosko, C. W. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2016.02.006 · Cited by 61 · see citing works

Poly(lactic acid) biocomposites reinforced with ultrafine bamboo‐char: Morphology, mechanical, thermal, and water absorption properties

Qian, S., Sheng, K., Yao, W., & Yu, H. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.43425 · Cited by 60 · see citing works

Enhanced Crystallization from the Glassy State of Poly(<scp>l</scp>-lactic acid) Confined in Anodic Alumina Oxide Nanopores

Guan, Y., Liu, G., Ding, G., Yang, T., Müller, A. J., & Wang, D. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b00108 · Cited by 59 · see citing works

Dopamine-induced functionalization of cellulose nanocrystals with polyethylene glycol towards poly(L-lactic acid) bionanocomposites for green packaging

Li, L., Bao, R., Gao, T., Liu, Z., Xie, B., Yang, M., & Yang, W. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.057 · Cited by 57 · see citing works

Glowing stereocomplex biopolymers are generating power: polylactide/carbon quantum dot hybrid nanofibers with high piezoresponse and multicolor luminescence

Xu, Y., Jin, L., He, X., Huang, X., Xie, M., Wang, C., Zhang, C., Yang, W., Meng, F., & Lü, J. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta08593e · Cited by 56 · see citing works

Effect of nucleating agents on the crystallization behavior and heat resistance of poly( l ‐lactide)

Zhang, X., Meng, L., Li, G., Liang, N., Zhang, J., Zhu, Z., & Wang, R. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42999 · Cited by 54 · see citing works

Bamboo fiber strengthened poly(lactic acid) composites with enhanced interfacial compatibility through a multi-layered coating of synergistic treatment strategy

Fei, B., Wang, D., AlMasoud, N., Yang, H., Yang, J., Alomar, T. S., Puangsin, B., Xu, B. B., Algadi, H., El-Bahy, Z. M., et al. (2023) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2023.126018 · Cited by 54 · see citing works

Toward High-Performance Poly( l -lactide) Fibers via Tailoring Crystallization with the Aid of Fibrillar Nucleating Agent

Zhang, H., Bai, H., Liu, Z., Zhang, Q., & Fu, Q. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00784 · Cited by 54 · see citing works

Poly(l-lactic acid)-polyethylene glycol-poly(l-lactic acid) triblock copolymer: A novel macromolecular plasticizer to enhance the crystallization of poly(l-lactic acid)

Li, L., Cao, Z.-Q., Bao, R., Xie, B., Yang, M., & Yang, W. M. (2017) · European Polymer Journal · doi:10.1016/j.eurpolymj.2017.10.025 · Cited by 54 · see citing works

Extraordinary toughness and heat resistance enhancement of biodegradable PLA/PBS blends through the formation of a small amount of interface-localized stereocomplex crystallites during melt blending

Gu, Z., Zhang, J., Cao, W., Liu, X., Wang, J., Zhang, X., Chen, W., & Bao, J. (2022) · Polymer · doi:10.1016/j.polymer.2022.125454 · Cited by 52 · see citing works

Enantiomeric blends of high-molecular-weight poly(lactic acid)/poly(ethylene glycol) triblock copolymers: Enhanced stereocomplexation and thermomechanical properties

Han, L., Yu, C., Zhou, J., Shan, G., Bao, Y., Yun, X., Dong, T., & Pan, P. (2016) · Polymer · doi:10.1016/j.polymer.2016.09.073 · Cited by 52 · see citing works

Flow-Induced Polymer Crystallization under Pressure and Its Engineering Application in “Structuring” Polymer Processing

Zhong, G., Yang, S.-G., Lei, J., & Li, Z. (2024) · Macromolecules · doi:10.1021/acs.macromol.3c01846 · Cited by 51 · see citing works

Crystallization behavior of PEG/PLLA block copolymers: Effect of the different architectures and molecular weights

Zhou, D., Shao, J., Li, G., Sun, J., Bian, X., & Chen, X. (2015) · Polymer · doi:10.1016/j.polymer.2015.02.019 · Cited by 49 · see citing works

Fully Bio-Based and Supertough PLA Blends via a Novel Interlocking Strategy Combining Strong Dipolar Interactions and Stereocomplexation

Chen, X., Li, C., Ding, Y., Li, Y., Li, J., Sun, L., Wei, J., Wei, X., Wang, H., Zhang, K., et al. (2022) · Macromolecules · doi:10.1021/acs.macromol.2c00266 · Cited by 48 · see citing works

Biomimetic Tough Self-Healing Polymers Enhanced by Crystallization Nanostructures

Wan, D., Jiang, Q., Song, Y., Pan, J., Qi, T., & Li, G. L. (2020) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b01094 · Cited by 47 · see citing works

Thermal strain-induced cold crystallization of amorphous poly(lactic acid)

Zhou, C.-B., Li, H.-F., Zhang, W.-Y., Li, J.-Q., Huang, S.-Y., Meng, Y., Christiansen, J. D. C., Yu, D.-H., Wu, Z.-H., & Jiang, S.-C. (2016) · CrystEngComm · doi:10.1039/c6ce00464d · Cited by 35 · see citing works

Effect of Crystallization on Shape Memory Effect of Poly(lactic Acid)

Nie, D., Yin, X., Cai, Z., & Wang, J. (2022) · Polymers · doi:10.3390/polym14081569 · Cited by 45 · see citing works

Synergistic effect of plasticizer and nucleating agent on crystallization behavior of polylactide during fused filament fabrication

Gao, X., Qi, S., Yang, B., Su, Y., Li, J., & Wang, D. (2021) · Polymer · doi:10.1016/j.polymer.2021.123426 · Cited by 43 · see citing works

Mesophase-Mediated Crystallization of Poly( l -lactide): Deterministic Pathways to Nanostructured Morphology and Superstructure Control

Lan, Q., & Li, Y. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b01442 · Cited by 43 · see citing works

Effect of Chain Length on Polymer Stereocomplexation: A Quantitative Study

Zhou, D., Xu, M., Li, J., Tan, R., Ma, Z., & Dong, X. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c00380 · Cited by 43 · see citing works

Preparation and characterization of antibacterial poly(lactic acid) nanocomposites with N-halamine modified silica

Zhao, Y., Wei, B., Wu, M., Zhang, H., Yao, J., Chen, X., & Shao, Z. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.11.125 · Cited by 42 · see citing works

Effect of nucleating agents on the strain-induced crystallization of poly(l-lactide)

Yin, Y., Zhang, X., Song, Y. X., de Vos, S., Wang, R., Joziasse, C. A. P., Liu, G., & Wang, D. (2015) · Polymer · doi:10.1016/j.polymer.2015.03.061 · Cited by 42 · see citing works

Role of stereocomplex in advancing mass transport and thermomechanical properties of polylactide

Chen, Q., Auras, R. A., & Uysal‐Unalan, I. (2022) · Green Chemistry · doi:10.1039/d1gc04520b · Cited by 41 · see citing works

Effect of layered silicates on fibril formation and properties of PCL/PLA microfibrillar composites

Kelnar, I., Fortelný, I., Kaprálková, L., Kratochvíl, J., Angelov, B., & Nevoralová, M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43061 · Cited by 41 · see citing works

Effect of flax fiber content on polylactic acid (PLA) crystallization in PLA/flax fiber composites

Xia, X., Shi, X., Liu, W., Zhao, H., Li, H., & Zhang, Y. (2017) · Iranian Polymer Journal · doi:10.1007/s13726-017-0554-9 · Cited by 40 · see citing works

Shear-induced stereocomplex cylindrites in polylactic acid racemic blends: Morphology control and interfacial performance

Xu, J., Li, Y., Li, Y.-K., Chen, Y., Wang, R., Liu, G., Liu, S., Ni, H.-W., & Li, Z. (2018) · Polymer · doi:10.1016/j.polymer.2018.02.048 · Cited by 40 · see citing works

High-melting-point crystals of poly( l -lactic acid) (PLLA): the most efficient nucleating agent to enhance the crystallization of PLLA

Yin, H., Wei, X., Bao, R., Dong, Q., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2015) · CrystEngComm · doi:10.1039/c4ce02497d · Cited by 39 · see citing works

Polymorphism of a high-molecular-weight racemic poly( l -lactide)/poly( d -lactide) blend: effect of melt blending with poly(methyl methacrylate)

Bao, R., Yang, W. M., Liu, Z., Xie, B., & Yang, M. (2015) · RSC Advances · doi:10.1039/c5ra00691k · Cited by 39 · see citing works

Bioinspired Polylactide Based on the Multilayer Assembly of Shish-Kebab Structure: A Strategy for Achieving Balanced Performances

Yi, L., Luo, S., Shen, J., Guo, S., & Sue, H. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02738 · Cited by 39 · see citing works

Tailoring Crystalline Morphology by High-Efficiency Nucleating Fiber: Toward High-Performance Poly( l -lactide) Biocomposites

Gao, T., Zhang, Z., Li, L., Bao, R., Liu, Z., Xie, B., Yang, M., & Yang, W. M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04907 · Cited by 39 · see citing works

Photothermally Activated Electrospun Nanofiber Mats for High-Efficiency Surface-Mediated Gene Transfection

Zheng, Y., Wu, Y. C., Zhou, Y., Wu, J., Wang, X., Qu, Y., Wang, Y., Zhang, Y., & Yu, Q. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b20221 · Cited by 39 · see citing works

Cold Crystallization of PDMS and PLLA in Poly(l-lactide-b-dimethylsiloxane-b-l-lactide) Triblock Copolymer and Their Effect on Nanostructure Morphology

Nagarajan, S., & Gowd, E. B. (2015) · Macromolecules · doi:10.1021/acs.macromol.5b01179 · Cited by 36 · see citing works

Effect of two-year degradation on mechanical interaction between a bioresorbable scaffold and blood vessel

Qiu, T., He, R., Abunassar, C., Hossainy, S., & Zhao, L. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.11.031 · Cited by 36 · see citing works

Oriented and annealed poly(lactic acid) films and their performance in flexible printed and hybrid electronics

Luoma, E., Välimäki, M. K., Rokkonen, T. M. J., Sääskilahti, H., Ollila, J. T., Rekilä, J., & Immonen, K. (2021) · Journal of Plastic Film & Sheeting · doi:10.1177/8756087920988569 · Cited by 36 · see citing works

Layer structure by shear-induced crystallization and thermal mechanical properties of injection-molded poly(l-lactide) with nucleating agents

Xie, X.-L., Sang, Z., Xu, J., Zhong, G., Li, Z., Ji, X., Wang, R., & Xu, L. (2017) · Polymer · doi:10.1016/j.polymer.2017.01.004 · Cited by 35 · see citing works

Polymorphic homocrystallization and phase behavior of high-molecular-weight Poly(L-lactic acid)/poly(D-lactic acid) racemic mixture with intentionally enhanced stereocomplexation ability via miscible blending

Xie, Q. M., Guo, G. F., Lu, W., Sun, C., Zhou, J., Zheng, Y., Shan, G., Bao, Y., & Pan, P. (2020) · Polymer · doi:10.1016/j.polymer.2020.122597 · Cited by 35 · see citing works

Transformation from form II to form I accelerated by oriented lamellae in Polybutene-1

Chen, J., Wang, B., Sun, T., Xu, J., Chen, J., & Zhang, B. (2019) · Polymer · doi:10.1016/j.polymer.2019.121966 · Cited by 34 · see citing works

Microcellular open-cell poly(l-lactic acid)/poly(d-lactic acid) foams for oil-water separation prepared via supercritical CO2 foaming

Yu, K., Wu, Y., Zhang, X., Hou, J., & Chen, J. (2022) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102219 · Cited by 33 · see citing works

High-Impact PLA in Compatibilized PLA/PCL Blends: Optimization of Blend Composition and Type and Content of Compatibilizer

Fernández‐Tena, A., Otaegi, I., Irusta, L., Sebastián, V., Guerrica‐Echevarria, G., Müller, A. J., & Aranburu, N. (2023) · Macromolecular Materials and Engineering · doi:10.1002/mame.202300213 · Cited by 34 · see citing works

Realization of ultra-high barrier to water vapor by 3D-interconnection of super-hydrophobic graphene layers in polylactide films

Zhou, S., Yang, B., Li, Y., Gao, X., Ji, X., Zhong, G., & Li, Z. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta03901h · Cited by 32 · see citing works

Temperature-dependent polymorphic crystallization of poly(l-lactide)s on the basis of optical purity and microstructure

Song, P., Sang, L., Jin, C., & Wei, Z.-Y. (2018) · Polymer · doi:10.1016/j.polymer.2017.11.069 · Cited by 27 · see citing works

A facile strategy for preparation of strong tough poly(lactic acid) foam with a unique microfibrillated bimodal micro/nano cellular structure

Xiang, P., Gou, L., Zou, Y., Chen, B., Bi, S., Chen, X., & Yu, P. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.12.187 · Cited by 30 · see citing works

Key progresses of MOE key laboratory of macromolecular synthesis and functionalization in 2022

Deng, X., Chen, K., Pang, K., Liu, X., Gao, M., Ren, J., Yang, G., Wu, G., Zhang, C., Ni, X., et al. (2023) · Chinese Chemical Letters · doi:10.1016/j.cclet.2023.108861 · Cited by 29 · see citing works

Modified Biomass-Reinforced Polylactic Acid Composites

Zhu, J., Sun, H., Yang, B., & Weng, Y. (2024) · Materials · doi:10.3390/ma17020336 · Cited by 30 · see citing works

Gradient Structure of Crystalline Morphology in Injection-Molded Polylactide Parts Tuned by Oscillation Shear Flow and Its Influence on Thermomechanical Performance

Sang, Z., Xie, X.-L., Zhou, S., Li, Y., Zheng, Y. H., Xu, L., Zhong, G., & Li, Z. (2017) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b00930 · Cited by 30 · see citing works

The synergistic effect of heterogeneous nucleation and stress-induced crystallization on supramolecular structure and performances of poly(lactic acid) melt-spun fibers

Sheng, G., Zhou, Z., Yu, S., Chen, Z., Xiang, H., & Zhu, M. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.11.270 · Cited by 30 · see citing works

Effect of particle size and environmental conditions on the release of di(2-ethylhexyl) phthalate from microplastics

Mao, S., & He, C. (2023) · Chemosphere · doi:10.1016/j.chemosphere.2023.140474 · Cited by 29 · see citing works

Annealing and crystallization kinetics of poly(lactic acid) pieces obtained by additive manufacturing

Reis, I. A., Claro, P. I. C., Marcomini, A. L., Mattoso, L. H. C., da Silva, S. P., & Neto, A. R. D. S. (2021) · Polymer Engineering and Science · doi:10.1002/pen.25737 · Cited by 29 · see citing works

Thicker Lamellae and Higher Crystallinity of Poly(lactic acid) via Applying Shear Flow and Pressure and Adding Poly(ethylene Glycol)

Ru, J., Yang, S.-G., Lei, J., & Li, Z. (2017) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.7b02241 · Cited by 28 · see citing works

Mussel-inspired polydopamine-modified cellulose nanocrystal fillers for the preparation of reinforced and UV-shielding poly (lactic acid) films

Xu, Y., Zheng, D., Chen, X., Yao, W., Wang, Y., Zheng, Z., Tan, H., & Zhang, Y. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.06.152 · Cited by 28 · see citing works

Polymorphic Crystallization and Crystalline Reorganization of Poly( l -lactic acid)/Poly( d -lactic acid) Racemic Mixture Influenced by Blending with Poly(vinylidene fluoride)

Yu, C., Han, L., Bao, J., Shan, G., Bao, Y., & Pan, P. (2016) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.6b06387 · Cited by 28 · see citing works

Development of zinc salts of amino acids as a new class of biocompatible nucleating agents for poly(l-lactide)

Wei, Z., Shao, S., Sui, M., Song, P., He, M., Xu, Q., Leng, X., Wang, Y., & Li, Y. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.064 · Cited by 28 · see citing works

Polylactic Acid/Calcium Stearate Hydrocharging Melt-Blown Nonwoven Fabrics for Respirator Applications

Hu, R. Q., Huang, Q., Liu, G., Jiao, W., Yang, Q., Wang, X., Yu, J., & Ding, B. (2023) · ACS Applied Polymer Materials · doi:10.1021/acsapm.3c00500 · Cited by 27 · see citing works

Electron beam treatment of polylactide at elevated temperature in nitrogen atmosphere

Huang, Y., Gohs, U., Müller, M. T., Zschech, C., & Wießner, S. (2019) · Radiation Physics and Chemistry · doi:10.1016/j.radphyschem.2019.02.053 · Cited by 27 · see citing works

Robust Interfacial Cylindrites of Polylactic Acid Modulated by an Intense Shear Flow Field

Li, Y., Yang, S., Li, Y.-K., Xu, J., Ni, H.-W., Su, Z.-H., & Li, Z. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00668 · Cited by 25 · see citing works

Polyethylene glycol grafted with carboxylated graphene oxide as a novel interface modifier for polylactic acid/graphene nanocomposites

Niu, M., Wang, H., Li, J., Chen, H., Li, L., Yang, H., Liu, X., Chen, Z., Liu, H., & Chen, J. (2020) · Royal Society Open Science · doi:10.1098/rsos.192154 · Cited by 25 · see citing works

An experimental investigation into the physical, thermal and mechanical degradation of a polymeric bioresorbable scaffold

Fiuza, C., Polak-Kraśna, K., Antonini, L., Petrini, L., Carroll, O., Ronan, W., & Vaughan, T. J. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104955 · Cited by 25 · see citing works

Formation of stereocomplex in enantiomeric poly(lactide)s via recrystallization of homocrystals: An in-situ X-ray scattering study

Yin, Y., Liu, G., Song, Y., Zhang, X., de Vos, S., Wang, R., Joziasse, C. A. P., & Wang, D. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.05.033 · Cited by 24 · see citing works

Three-dimensional orientation of poly( l -lactide) crystals under uniaxial drawing

Lizundia, E., Larrañaga, A., Vilas‐Vilela, J. L., & León, L. M. (2016) · RSC Advances · doi:10.1039/c5ra22680e · Cited by 24 · see citing works

Research into biodegradable polymeric stents: a review of experimental and modelling work

Qiu, T., & Zhao, L. (2018) · Vessel Plus · doi:10.20517/2574-1209.2018.13 · Cited by 24 · see citing works

Effect of Basalt Powder Surface Treatments on Mechanical and Processing Properties of Polylactide-Based Composites

Barczewski, M., Mysiukiewicz, O., Lewandowski, K., Nowak, D., Matykiewicz, D., Andrzejewski, J., Skórczewska, K., & Piasecki, A. (2020) · Materials · doi:10.3390/ma13235436 · Cited by 24 · see citing works

Poly(lactic acid)/flax composites: effect of surface modification and thermal treatment on interfacial adhesion, crystallization, microstructure, and mechanical properties

Bayart, M., Foruzanmehr, M., Vuillaume, P., Ovlaque, P., Robert, M., & Elkoun, S. (2021) · Composite interfaces (Print) · doi:10.1080/09276440.2021.1884470 · Cited by 24 · see citing works

Poly(lactic acid) crystallization

Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606 · see citing works

The Effects of Nucleating Agents and Processing on the Crystallization and Mechanical Properties of Polylactic Acid: A Review

Gao, P., & Masato, D. (2024) · Micromachines · doi:10.3390/mi15060776 · Cited by 70 · see citing works

CHAPTER 3. Crystallization of PLA-based Materials

Müller, A. J., Ávila, M., Saenz, G., & Salazar, J. (2014) · RSC polymer chemistry series · doi:10.1039/9781782624806-00066 · Cited by 58 · see citing works

Poly(melkzuur) : karakterisatie en verbetering

Carbone, M. J. (2015) · Lirias

Crystallization behavior of poly(lactic acid) and its blends

Wang, Y., Liu, C., & Shen, C. (2020) · Polymer Crystallization · doi:10.1002/pcr2.10171 · Cited by 15 · see citing works