The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Oxidation of magnesium
Abstract
Pure Mg was oxidized in 20 kPa O 2 , at temperatures between room temperature and 400°C, for times ranging from 2 min to 60 h. The oxide layer was analysed by XPS. The samples were pre‐treated by mechanical polishing and ion etching. Oxidation was carried out in a furnace connected to the XPS instrument. Magnesium was also oxidized in CO 2 at 150°C and in water in order to gain information about the binding energies of the elements in MgCO 3 and Mg(OH) 2 . The binding energies of Mg 2p, O 1s and C 1s of these compounds, as well as MgO, are reported. The thickness of the oxides formed during oxidation for 15 min at room temperature and at 150°C are 1.5 and 1.7 nm, respectively. At 300°C the growth of the oxide is well fitted by an inverse logarithmic law. The fact that the oxide formed in a dry atmosphere up to 300°C is extremely thin indicates that it has a low defect density. The influence of the humidity on the corrosion properties of Mg is discussed. The influence of the high vapour pressure of Mg on its oxidation properties is also mentioned. Copyright © 2002 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Seah, M. P., & Dench, W. A. (1979) · Surface and Interface Analysis · doi:10.1002/sia.740010103 · Cited by 5,349
Theory of the oxidation of metals
Cabrera, N., & Mott, N. F. (1949) · Reports on Progress in Physics · doi:10.1088/0034-4885/12/1/308 · Cited by 2,986
Atlas D-Equilibres Electrochimiques
Pourbaix, M., & Burbank, J. (1964) · Journal of The Electrochemical Society · doi:10.1149/1.2426051 · Cited by 883
Reaction of carbon dioxide with the magnesium(0001) surface
Campbell, S., Hollins, P., McCash, E. M., & ROBERTS, M. W. (1986) · Journal of Electron Spectroscopy and Related Phenomena · doi:10.1016/0368-2048(86)85042-3 · Cited by 30
Cited by
Yao, Y., Gao, B., Chen, J., & Yang, L. (2013) · Environmental Science & Technology · doi:10.1021/es4012977 · Cited by 787
Hou, S., Ji, X., Gaskell, K., Wang, P.-F., Wang, L., Xu, J., Sun, R., Borodin, O., & Wang, C. (2021) · Science · doi:10.1126/science.abg3954 · Cited by 604
Prospects of laser welding technology in the automotive industry: A review
Hong, K.-M., & Shin, Y. C. (2017) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2017.02.008 · Cited by 376
Corrosion protection of magnesium alloys by cerium, zirconium and niobium-based conversion coatings
Ardelean, H., Frateur, I., & Marcus, P. (2008) · Corrosion Science · doi:10.1016/j.corsci.2008.03.015 · Cited by 264
Self-citationHow an oxide shell affects the ultraviolet plasmonic behavior of Ga, Mg, and Al nanostructures
Gutierrez, Y., Ortiz, D., Sanz, J. M., Saiz, J. M., Gonzalez, F., Everitt, H. O., & Moreno, F. (2016) · Optics Express · doi:10.1364/oe.24.020621 · Cited by 73
Metadata
- Authors
- Fournier, V., Marcus, P., & Olefjord, I.
- Venue
- Surface and Interface Analysis
- Publisher
- Wiley
- Published
- 2002-08
- Volume
- 34
- Issue
- 1
- Pages
- 494-497
- ISSN
- 0142-2421 (ISSN-L)
- 1096-9918
- OpenAlex
- W2115739593
- Cited by
- 278
- References
- 4
- FWCI
- 1.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.