The DOI matches its Crossref record.
Synthesis of Hierarchical Cobalt Phosphate Nanoflakes and Their Enhanced Electrochemical Performances for Supercapacitor Applications
Abstract
Hierarchical structured cobalt phosphate (Co 3 (PO 4 ) 2 ) nanoflakes were synthesized by simple co‐precipitation method and employed as electrodes for supercapacitor. The purity and phase formation of the synthesized (Co 3 (PO 4 ) 2 ) nanoflakes were ascertained by XRD and XPS measurements. The surface morphology and elemental composition of the Co 3 (PO 4 ) 2 nanoflakes were observed by using FE‐SEM, TEM and EDS. The electrochemical behaviour of the present material as an anode material for supercapacitor was explored by cyclic voltammetric measurements and galvanostatic charge‐discharge analysis. The specific capacitance for the as‐synthesized and calcined (Co 3 (PO 4 ) 2 ) nanoflakes electrodes was 132 and 210 Fg −1 at a scan rate of 10 mV s −1 . The enhanced electrochemical behaviour of the calcined Co 3 (PO 4 ) 2 nanoflakes might be due to its well crystalline nature which offers more active sites for faradaic reactions, good conductivity and rapid diffusion of the electrolyte ions. The fabricated Co 3 (PO 4 ) 2 electrode displayed an excellent cyclic stability with 95 % retention of initial specific capacitance after 800 cycles. An enhanced effect on the electrochemical properties of the Co 3 (PO 4 ) 2 nanoflakes has been proposed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
A review on ZnO nanostructured materials: energy, environmental and biological applications
Theerthagiri, J., Salla, S., Senthil, R. A., Nithyadharseni, P., Madankumar, A., Arunachalam, P., Maiyalagan, T., & Kim, H.-S. (2019) · Nanotechnology · doi:10.1088/1361-6528/ab268a · Cited by 530
Self-citationMetal Phosphides and Phosphates‐based Electrodes for Electrochemical Supercapacitors
Li, X., Elshahawy, A. M., Guan, C., & Wang, J. (2017) · Small · doi:10.1002/smll.201701530 · Cited by 488
Heteroatom-doped graphene-based materials for sustainable energy applications: A review
Lee, S. J., Theerthagiri, J., Nithyadharseni, P., Arunachalam, P., Balaji, D., Madan Kumar, A., Madhavan, J., Mittal, V., & Choi, M. Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110849 · Cited by 351
Self-citationZhao, X., Mao, L., Cheng, Q., Li, J., Liao, F., Yang, G., Xie, L., Zhao, C., & Chen, L. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.124081 · Cited by 329
Theerthagiri, J., Karuppasamy, K., Durai, G., Rana, A. U. H. S., Arunachalam, P., Sangeetha, K., Kuppusami, P., & Kim, H.-S. (2018) · Nanomaterials · doi:10.3390/nano8040256 · Cited by 313
Self-citationTheerthagiri, J., Senthil, R. A., Nithyadharseni, P., Lee, S. J., Durai, G., Kuppusami, P., Madhavan, J., & Choi, M. Y. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.02.270 · Cited by 313
Self-citationJayaraman, T., Murthy, A. P., Elakkiya, V., Chandrasekaran, S., Nithyadharseni, P., Khan, Z., Senthil, R. A., Shanker, R., Raghavender, M., Kuppusami, P., et al. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2018.02.029 · Cited by 183
Self-citation
Metadata
- Authors
- Theerthagiri, J., Thiagarajan, K., Senthilkumar, B., Khan, Z., Senthil, R. A., Arunachalam, P., Madhavan, J., & Ashokkumar, M.
- Venue
- ChemistrySelect
- Publisher
- Wiley
- Published
- 2017-01-09
- Volume
- 2
- Issue
- 1
- Pages
- 201-210
- ISSN
- 2365-6549 (ISSN-L)
- OpenAlex
- W2573344649
- Cited by
- 160
- References
- 0
- FWCI
- 5.46
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.