3D Printing Hierarchical Silver Nanowire Aerogel with Highly Compressive Resilience and Tensile Elongation through Tunable Poisson's Ratio
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Metallic aerogels have attracted intense attention due to their superior properties, such as high electrical conductivity, ultralow densities, and large specific surface area. The preparation of metal aerogels with high efficiency and controllability remains challenge. A 3D freeze assembling printing technique integrated with drop‐on‐demand inkjet printing and freeze casting are proposed for metallic aerogels preparation. This technique enables tailoring both the macrostructure and microstructure of silver nanowire aerogels (SNWAs) by integrating programmable 3D printing and freeze casting, respectively. The density of the printed SNWAs is controllable, which can be down to 1.3 mg cm−3. The ultralight SNWAs reach high electrical conductivity of 1.3 S cm−1 and exhibit excellent compressive resilience under 50% compressive strain. Remarkably, the printing methodology also enables tuning aerogel architectures with designed Poisson's ratio (from negative to positive). Moreover, these aerogel architechtures with tunable Poisson's ratio present highly electromechanical stability under high compressive and tensile strain (both strain up to 20% with fully recovery).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Colloidal Nanocrystal-Based Gels and Aerogels: Material Aspects and Application Perspectives
Gaponik, N., Herrmann, A.-K., & Eychmüller, A. (2012) · The Journal of Physical Chemistry Letters · doi:10.1021/jz201357r · Cited by 173
Research works printed but not linked: 33
- 10.1002/anie.200902994 · DOI · Paper page
- 10.1557/jmr.2006.0322 · doi:10.1557/jmr.2006.0322
- 10.1021/nl2005516 · DOI · Paper page
- 10.1021/nn502702a · DOI · Paper page
- 10.1002/anie.201400457 · DOI · Paper page
- 10.1039/c3ta10969k · DOI · Paper page
- 10.1002/smll.201503524 · DOI · Paper page
- 10.1021/nn504894j · DOI
- 10.1115/1.4034669 · DOI
- 10.1115/1.4035392 · DOI
- 10.1002/adma.201401804 · DOI · Paper page
- 10.1038/ncomms2251 · DOI · Paper page
- Doi M., 1988, The Theory of Polymer Dynamics
- 10.1038/srep00849 · DOI · Paper page
- 10.1021/ie070800j · DOI
- 10.1557/jmr.2010.10 · DOI
- 10.1126/science.1120937 · DOI · Paper page
- 10.1111/j.1551-2916.2009.03087.x · DOI · Paper page
- 10.1002/adma.201606042 · DOI · Paper page
- 10.1038/ncomms7962 · DOI · Paper page
- 10.1002/adma.201405046 · DOI · Paper page
- 10.1016/j.carbon.2015.05.102 · DOI · Paper page
- 10.1126/science.235.4792.1038 · DOI · Paper page
- 10.1002/adma.201502485 · DOI · Paper page
- 10.1002/adma.201200584 · DOI · Paper page
- 10.1002/adma.201301986 · DOI · Paper page
- 10.1002/adfm.201002022 · DOI · Paper page
- 10.1002/adma.201601363 · DOI · Paper page
- 10.1002/adma.201204576 · DOI · Paper page
- 10.1063/1.3479393 · doi:10.1063/1.3479393
- 10.1002/adma.201505409 · DOI · Paper page
- 10.1021/nn3021772 · DOI · Paper page
- 10.1002/adma.201300774 · DOI · Paper page
Cited by
Shao, G., Hanaor, D. A. H., Shen, X., & Gurlo, A. (2020) · Advanced Materials · doi:10.1002/adma.201907176 · Cited by 871
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Self-citationWan, Y., Zhu, P., Yu, S., Sun, R., Wong, C., & Liao, W. (2018) · Small · doi:10.1002/smll.201800534 · Cited by 397
Printed aerogels: chemistry, processing, and applications
Feng, J., Su, B.-L., Xia, H., Zhao, S., Gao, C., Wang, L., Ogbeide, O., Feng, J., & Hasan, T. (2021) · Chemical Society Reviews · doi:10.1039/c9cs00757a · Cited by 313
Highly stretchable carbon aerogels
Guo, F., Jiang, Y., Xu, Z., Xiao, Y., Fang, B., Liu, Y., Gao, W., Zhao, P., Wang, H., & Gao, C. (2018) · Nature Communications · doi:10.1038/s41467-018-03268-y · Cited by 313
Metadata
- Authors
- Yan, P., Brown, E., Su, Q., Li, J., Wang, J., Xu, C., Zhou, C., & Lin, D.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2017-08-18
- Volume
- 13
- Issue
- 38
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2746566050
- Cited by
- 104
- References
- 2
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
- Funders
- Kansas State University
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D Printing Hierarchical Silver Nanowire Aerogel with Highly Compressive Resilience and Tensile Elongation through Tunable Poisson's Ratio. https://app.cochat.ai/papers/10.1002/smll.201701756
- The paper
- Yan, P., Brown, E., Su, Q., Li, J., Wang, J., Xu, C., Zhou, C., & Lin, D. (2017). 3D Printing Hierarchical Silver Nanowire Aerogel with Highly Compressive Resilience and Tensile Elongation through Tunable Poisson's Ratio. Small. https://doi.org/10.1002/smll.201701756
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.