The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Graphene‐Encapsulated FeS2 in Carbon Fibers as High Reversible Anodes for Na+/K+ Batteries in a Wide Temperature Range
Abstract
Developing low cost, long life, and high capacity rechargeable batteries is a critical factor towards developing next‐generation energy storage devices for practical applications. Therefore, a simple method to prepare graphene‐coated FeS 2 embedded in carbon nanofibers is employed; the double protection from graphene coating and carbon fibers ensures high reversibility of FeS 2 during sodiation/desodiation and improved conductivity, resulting in high rate capacity and long‐term life for Na+ (305.5 mAh g−1 at 3 A g−1 after 2450 cycles) and K+ (120 mAh g−1 at 1 A g−1 after 680 cycles) storage at room temperature. Benefitting from the enhanced conductivity and protection on graphene‐encapsulated FeS 2 nanoparticles, the composites exhibit excellent electrochemical performance under low temperature (0 and −20 °C), and temperature tolerance with stable capacity as sodium‐ion half‐cells. The Na‐ion full‐cells based on the above composites and Na 3 V 2(PO 4)3 can afford reversible capacity of 95 mAh g−1 at room temperature. Furthermore, the full‐cells deliver promising discharge capacity (50 mAh g−1 at 0 °C, 43 mAh g−1 at −20 °C) and high energy density at low temperatures. Density functional theory calculations imply that graphene coating can effectively decrease the Na+ diffusion barrier between FeS 2 and graphene heterointerface and promote the reversibility of Na+ storage in FeS 2, resulting in advanced Na+ storage properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Cited by
Jia, X., Liu, C., Neale, Z. G., Yang, J., & Cao, G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00628 · Cited by 1,791
Self-citationResearch Development on K-Ion Batteries
Hosaka, T., Kubota, K., Hameed, A. S., & Komaba, S. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00463 · Cited by 1,346
Hou, B., Wang, Y., Ning, Q., Li, W., Xi, X., Yang, X., Liang, H., Feng, X., & Wu, X. (2019) · Advanced Materials · doi:10.1002/adma.201903125 · Cited by 321
Metadata
- Authors
- Chen, C., Yang, Y., Tang, X., Qiu, R., Wang, S., Cao, G., & Zhang, M.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2019-02-04
- Volume
- 15
- Issue
- 10
- Pages
- e1804740-e1804740
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2911827158
- Cited by
- 167
- References
- 1
- FWCI
- 9.87
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.