The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Recent Development in Separators for High‐Temperature Lithium‐Ion Batteries
Abstract
Lithium‐ion batteries (LIBs) are promising energy storage devices for integrating renewable resources and high power applications, owing to their high energy density, light weight, high flexibility, slow self‐discharge rate, high rate charging capability, and long battery life. LIBs work efficiently at ambient temperatures, however, at high‐temperatures, they cause serious issues due to the thermal fluctuation inside batteries during operation. The separator is a key component of batteries and is crucial for the sustainability of LIBs at high‐temperatures. The high thermal stability with minimum thermal shrinkage and robust mechanical strength are the prime requirements along with high porosity, ionic conductivity, and electrolyte uptake for highly efficient high‐temperature LIBs. This Review deals with the recent studies and developments in separator technologies for high‐temperature LIBs with respect to their structural layered formation. The recent progress in monolayer and multilayer separators along with the developed preparation methodologies is discussed in detail. Future challenges and directions toward the advancement in separator technology are also discussed for achieving remarkable performance of separators in a high‐temperature environment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease
Cappello, V., Marchetti, L., Parlanti, P., Landi, S., Tonazzini, I., Cecchini, M., Piazza, V., & Gemmi, M. (2016) · Scientific Reports · doi:10.1038/s41598-016-0001-8 · Cited by 13,097
30 Years of Lithium‐Ion Batteries
Li, M., Lu, J., Chen, Z., & Amine, K. (2018) · Advanced Materials · doi:10.1002/adma.201800561 · Cited by 6,039
A review on fundamentals and applications of electrophoretic deposition (EPD)
BESRA, L., & LIU, M. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.07.001 · Cited by 2,258
A review on the separators of liquid electrolyte Li-ion batteries
Zhang, S. S. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.065 · Cited by 1,671
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Lee, H., Yanilmaz, M., Toprakci, O., Fu, K., & Zhang, X. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01432d · Cited by 1,467
Phase separation processes in polymer solutions in relation to membrane formation
van de Witte, P., Dijkstra, P. J., van den Berg, J. W. A., & Feijen, J. (1996) · Journal of Membrane Science · doi:10.1016/0376-7388(96)00088-9 · Cited by 1,393
Weyl Semimetals as Hydrogen Evolution Catalysts
Rajamathi, C. R., Gupta, U., Kumar, N., Yang, H., Sun, Y., Süß, V., Shekhar, C., Schmidt, M., Blumtritt, H., Werner, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606202 · Cited by 1,358
Direct Fabrication of Composite and Ceramic Hollow Nanofibers by Electrospinning
Li, D., & Xia, Y. (2004) · Nano Letters · doi:10.1021/nl049590f · Cited by 1,300
Nanostructured Fibers via Electrospinning
Bognitzki, M., Czado, W., Frese, T., Schaper, A., Hellwig, M., Steinhart, M., Greiner, A., & Wendorff, J. H. (2001) · Advanced Materials · doi:10.1002/1521-4095(200101)13:1<70::aid-adma70>3.0.co;2-h · Cited by 1,236
Current status and challenges for automotive battery production technologies
Kwade, A., Haselrieder, W., Leithoff, R., Modlinger, A., Dietrich, F., & Droeder, K. (2018) · Nature Energy · doi:10.1038/s41560-018-0130-3 · Cited by 1,133
Safety mechanisms in lithium-ion batteries
Balakrishnan, P. G., Ramesh, R., & Prem Kumar, T. (2006) · Journal of Power Sources · doi:10.1016/j.jpowsour.2005.12.002 · Cited by 1,132
Electrochemical energy storage in a sustainable modern society
Goodenough, J. B. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee42613k · Cited by 1,073
Gao, H., Yang, Z., Zhang, S., Cao, S., Shen, S., Pang, Z., & Jiang, X. (2014) · Scientific Reports · doi:10.1038/srep05138 · Cited by 1,061
A materials perspective on Li-ion batteries at extreme temperatures
Rodrigues, M.-T. F., Babu, G., Gullapalli, H., Kalaga, K., Sayed, F. N., Kato, K., Joyner, J., & Ajayan, P. M. (2017) · Nature Energy · doi:10.1038/nenergy.2017.108 · Cited by 913
Characterization and performance evaluation of lithium-ion battery separators
Lagadec, M. F., Zahn, R., & Wood, V. (2018) · Nature Energy · doi:10.1038/s41560-018-0295-9 · Cited by 812
Lithium-ion rechargeable batteries with LiCoO2 and carbon electrodes: the LiCoO2/C system
OZAWA, K. (1994) · Solid State Ionics · doi:10.1016/0167-2738(94)90411-1 · Cited by 776
Mussel‐Inspired Polydopamine‐Treated Polyethylene Separators for High‐Power Li‐Ion Batteries
Ryou, M., Lee, Y. M., Park, J., & Choi, J. W. (2011) · Advanced Materials · doi:10.1002/adma.201100303 · Cited by 721
Li, Y., Gao, T., Yang, Z., Chen, C., Luo, W., Song, J., Hitz, E., Jia, C., Zhou, Y., Liu, B., et al. (2017) · Advanced Materials · doi:10.1002/adma.201700981 · Cited by 720
Separator technologies for lithium-ion batteries
Huang, X. (2010) · Journal of Solid State Electrochemistry · doi:10.1007/s10008-010-1264-9 · Cited by 699
The formation mechanism of phase inversion membranes
Strathmann, H., & Kock, K. (1977) · Desalination · doi:10.1016/s0011-9164(00)88244-2 · Cited by 661
Schipper, F., Bouzaglo, H., Dixit, M., Erickson, E. M., Weigel, T., Talianker, M., Grinblat, J., Burstein, L., Schmidt, M., Lampert, J., et al. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201701682 · Cited by 565
Kim, S.-H., Ryu, H. G., Lee, J., Shin, J., Harikishore, A., Jung, H.-Y., Seul Kim, Y., Lyu, H.-N., Oh, E., Baek, N.-I., et al. (2015) · Scientific Reports · doi:10.1038/srep15864 · Cited by 555
Nanostructured Anode Materials for Lithium Ion Batteries: Progress, Challenge and Perspective
Mahmood, N., Tang, T., & Hou, Y. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600374 · Cited by 514
Wienk, I. M., Boom, R. M., Beerlage, M. A. M., Bulte, A. M. W., Smolders, C. A., & Strathmann, H. (1996) · Journal of Membrane Science · doi:10.1016/0376-7388(95)00256-1 · Cited by 505
State-of-the-art characterization techniques for advanced lithium-ion batteries
Lu, J., Wu, T., & Amine, K. (2017) · Nature Energy · doi:10.1038/nenergy.2017.11 · Cited by 492
Electrospun polyimide nanofibers and their applications
Ding, Y., Hou, H., Zhao, Y., Zhu, Z., & Fong, H. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2016.06.006 · Cited by 452
Wu, X., Guo, Y., Su, J., Xiong, J., Zhang, Y., & Wan, L. (2013) · Advanced Energy Materials · doi:10.1002/aenm.201300159 · Cited by 447
Characterization of microporous separators for lithium-ion batteries
Venugopal, G., Moore, J., Howard, J., & Pendalwar, S. (1999) · Journal of Power Sources · doi:10.1016/s0378-7753(98)00168-2 · Cited by 417
High temperature electrical energy storage: advances, challenges, and frontiers
Lin, X., Salari, M., Arava, L. M. R., Ajayan, P. M., & Grinstaff, M. W. (2016) · Chemical Society Reviews · doi:10.1039/c6cs00012f · Cited by 401
Separators for Lithium‐Ion Batteries: A Review on the Production Processes and Recent Developments
Deimede, V., & Elmasides, C. (2015) · Energy Technology · doi:10.1002/ente.201402215 · Cited by 382
Zhang, J., Liu, Z., Kong, Q., Zhang, C., Pang, S., Yue, L., Wang, X., Yao, J., & Cui, G. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am302290n · Cited by 368
Materials insights into low-temperature performances of lithium-ion batteries
Zhu, G., Wen, K., Lv, W., Zhou, X., Liang, Y., Yang, F., Chen, Z., Zou, M., Li, J., Zhang, Y., et al. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.056 · Cited by 367
Self-citationShim, J., Kim, H. J., Kim, B. G., Kim, Y. S., Kim, D.-G., & Lee, J.-C. (2017) · Energy & Environmental Science · doi:10.1039/c7ee01095h · Cited by 351
Phosphorene nanoribbon as a promising candidate for thermoelectric applications
Zhang, J., Liu, H. J., Cheng, L., Wei, J., Liang, J. H., Fan, D. D., Shi, J., Tang, X. F., & Zhang, Q. J. (2014) · Scientific Reports · doi:10.1038/srep06452 · Cited by 332
Costa, C. M., Silva, M. M., & Lanceros-Méndez, S. (2013) · RSC Advances · doi:10.1039/c3ra40732b · Cited by 330
Dai, J., Shi, C., Li, C., Shen, X., Peng, L., Wu, D., Sun, D., Zhang, P., & Zhao, J. (2016) · Energy & Environmental Science · doi:10.1039/c6ee01219a · Cited by 319
Low temperature performance of graphite electrode in Li-ion cells
Zhang, S. S., Xu, K., & Jow, T. R. (2002) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00620-5 · Cited by 311
Development of electrospun PVdF–PAN membrane-based polymer electrolytes for lithium batteries
GOPALAN, A., SANTHOSH, P., MANESH, K., NHO, J., KIM, S., HWANG, C., & LEE, K. (2008) · Journal of Membrane Science · doi:10.1016/j.memsci.2008.08.047 · Cited by 297
Di Lecce, D., Verrelli, R., & Hassoun, J. (2017) · Green Chemistry · doi:10.1039/c7gc01328k · Cited by 287
Polymer composites and blends for battery separators: State of the art, challenges and future trends
Nunes‐Pereira, J., Costa, C. M., & Lanceros-Méndez, S. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.02.010 · Cited by 278
Jeong, H.-S., & Lee, S.-Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.11.037 · Cited by 274
Fabrication of nanofiber meltblown membranes and their filtration properties
Hassan, M. A., Yeom, B. Y., Wilkie, A., Pourdeyhimi, B., & Khan, S. A. (2013) · Journal of Membrane Science · doi:10.1016/j.memsci.2012.09.050 · Cited by 267
Tian, W., Hu, H., Wang, Y., Li, P., Liu, J., Liu, J., Wang, X., Xu, X., Li, Z., Zhao, Q., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b09175 · Cited by 253
Shi, C., Dai, J., Shen, X., Peng, L., Li, C., Wang, X., Zhang, P., & Zhao, J. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.06.035 · Cited by 215
A low-temperature electrolyte for lithium and lithium-ion batteries
Plichta, E. J., & Behl, W. K. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00367-0 · Cited by 210
An inorganic membrane as a separator for lithium-ion battery
Xiang, H., Chen, J., Li, Z., & Wang, H. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.06.055 · Cited by 210
Yanilmaz, M., Lu, Y., Dirican, M., Fu, K., & Zhang, X. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.01.022 · Cited by 206
Zhu, X., Jiang, X., Ai, X., Yang, H., & Cao, Y. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2015.12.059 · Cited by 203
Membranes in Lithium Ion Batteries
Yang, M., & Hou, J. (2012) · Membranes · doi:10.3390/membranes2030367 · Cited by 197
Kwon, W., Kim, Y.-H., Kim, J.-H., Lee, T., Do, S., Park, Y., Jeong, M. S., Lee, T.-W., & Rhee, S.-W. (2016) · Scientific Reports · doi:10.1038/srep27827 · Cited by 196
Jeong, H.-S., Hong, S. C., & Lee, S.-Y. (2010) · Journal of Membrane Science · doi:10.1016/j.memsci.2010.08.012 · Cited by 186
Novel porous separator based on PVdF and PE non-woven matrix for rechargeable lithium batteries
Lee, Y. M., Kim, J.-W., Choi, N.-S., Lee, J. A., Seol, W.-H., & Park, J.-K. (2005) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.06.055 · Cited by 183
Tannic-Acid-Coated Polypropylene Membrane as a Separator for Lithium-Ion Batteries
Pan, L., Wang, H., Wu, C., Liao, C., & Li, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b04245 · Cited by 179
Novel aramid nanofiber-coated polypropylene separators for lithium ion batteries
Hu, S., Lin, S., Tu, Y., Hu, J., Wu, Y., Liu, G., Li, F., Yu, F., & Jiang, T. (2016) · Journal of Materials Chemistry A · doi:10.1039/c5ta08694a · Cited by 176
Choi, E.-S., & Lee, S.-Y. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm12246k · Cited by 166
Bacterial cellulose nanofibrous membrane as thermal stable separator for lithium-ion batteries
Jiang, F., Yin, L., Yu, Q., Zhong, C., & Zhang, J. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.090 · Cited by 165
Kim, J.-K., Kim, D. H., Joo, S. H., Choi, B., Cha, A., Kim, K. M., Kwon, T.-H., Kwak, S. K., Kang, S. J., & Jin, J. (2017) · ACS Nano · doi:10.1021/acsnano.7b02085 · Cited by 162
Shi, C., Zhang, P., Huang, S., He, X., Yang, P., Wu, D., Sun, D., & Zhao, J. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.08.008 · Cited by 157
Rodrigues, M. F., Kalaga, K., Gullapalli, H., Babu, G., Reddy, A. L. M., & Ajayan, P. M. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600218 · Cited by 152
Hwang, K., Kwon, B., & Byun, H. (2011) · Journal of Membrane Science · doi:10.1016/j.memsci.2011.06.005 · Cited by 151
Meltblown fibers: Influence of viscosity and elasticity on diameter distribution
Tan, D. H., Zhou, C., Ellison, C. J., Kumar, S., Macosko, C. W., & Bates, F. S. (2010) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/j.jnnfm.2010.04.012 · Cited by 151
Wu, D., Shi, C., Huang, S., Qiu, X., Wang, H., Zhan, Z., Zhang, P., Zhao, J., Sun, D., & Lin, L. (2015) · Electrochimica Acta · doi:10.1016/j.electacta.2015.07.072 · Cited by 150
Costa, C. M., Ribelles, J. L. G., Lanceros-Méndez, S., Appetecchi, G. B., & Scrosati, B. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.06.151 · Cited by 148
Cao, C., Tan, L., Liu, W., Ma, J., & Li, L. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.09.027 · Cited by 147
Tan, X., Zhao, W., & Mu, T. (2018) · Green Chemistry · doi:10.1039/c8gc01609g · Cited by 144
A review of nanofibrous structures in lithium ion batteries
Pampal, E. S., Stojanovska, E., Simon, B., & Kılıç, A. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.09.059 · Cited by 141
Roy, S., & Singha, N. R. (2017) · Membranes · doi:10.3390/membranes7030053 · Cited by 139
Huang, F., Xu, Y., Peng, B., Su, Y., Jiang, F., Hsieh, Y., & Weı, Q. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00032 · Cited by 135
Lee, Y., Lee, H., Lee, T., Ryou, M., & Lee, Y. M. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2015.06.106 · Cited by 134
He, J., Lv, W., Chen, Y., Xiong, J., Wen, K., Xu, C. G., Zhang, W., Li, Y., Wu, Q., & He, W. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta02434k · Cited by 132
Self-citationKim, K. J., Kim, J., Park, M., Kwon, H. K., Kim, H., & Kim, Y. (2011) · Journal of Power Sources · doi:10.1016/j.jpowsour.2011.09.086 · Cited by 129
Feng, G., Mi, L., Mi, L., Zheng, J., Feng, X., & Chen, W. (2017) · Journal of Power Sources · doi:10.1016/j.jpowsour.2017.11.086 · Cited by 128
Pure Inorganic Separator for Lithium Ion Batteries
He, M., Zhang, X., Jiang, K., Wang, J., & Wang, Y. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am507145h · Cited by 118
Na, W., Koh, K. H., Lee, A. S., Cho, S., Ok, B., Hwang, S., Lee, J. H., & Koo, C. M. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.12.039 · Cited by 115
Nanofibers from Melt Blown Fiber-in-Fiber Polymer Blends
Zuo, F., Tan, D. H., Wang, Z., Jeung, S., Macosko, C. W., & Bates, F. S. (2013) · ACS Macro Letters · doi:10.1021/mz400053n · Cited by 111
Sandwich-structured nano/micro fiber-based separators for lithium metal batteries
Pan, R., Sun, R., Wang, Z., Lindh, J., Edström, K., Strømme, M., & Nyholm, L. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.11.005 · Cited by 111
Improved performances of lithium-ion batteries with a separator based on inorganic fibers
Wang, M., Chen, X., Wang, H., Wu, H., Jin, X., & Huang, C. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta08404d · Cited by 109
PVDF/PAN blend separators via thermally induced phase separation for lithium ion batteries
Wu, Q., Liang, H., Gu, L., Yu, Y., Huang, Y., & Xu, Z. (2016) · Polymer · doi:10.1016/j.polymer.2016.11.008 · Cited by 105
Park, J.-H., Park, W. S., Kim, J. H., Ryoo, D., Kim, H. S., Jeong, Y. U., Kim, D., & Lee, S. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2010.09.102 · Cited by 103
Core–shell-structured nanofibrous membrane as advanced separator for lithium-ion batteries
Jiang, F., Nie, Y., Yin, L., Yuan, F., Yu, Q., & Zhong, C. (2016) · Journal of Membrane Science · doi:10.1016/j.memsci.2016.02.067 · Cited by 100
High‐Performance PE‐BN/PVDF‐HFP Bilayer Separator for Lithium‐Ion Batteries
Waqas, M., Ali, S., Lv, W., Chen, D., Boateng, B., & He, W. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201801330 · Cited by 100
Self-citationJiang, X., Xiao, L., Ai, X., Yang, H., & Cao, Y. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta08063h · Cited by 95
Development of low temperature Li-ion electrolytes for NASA and DoD applications
Plichta, E., Hendrickson, M., Thompson, R., Au, G., Behl, W., Smart, M., Ratnakumar, B., & Surampudi, S. (2001) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00578-4 · Cited by 91
Li, Y., Pu, H., & Wei, Y. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.01.114 · Cited by 91
Fu, Q., Lin, G., Chen, X., Yu, Z., Yang, R., Li, M., Zeng, X., & Chen, J. (2017) · Energy Technology · doi:10.1002/ente.201700347 · Cited by 88
Wet-laid non-woven fabric for separator of lithium-ion battery
Wang, Y., Huai-yu, Z., Hu, J. Q., Yun, L., & Shushu, Z. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.09.078 · Cited by 85
Zhang, J., Chen, S., Xie, X., Kretschmer, K., Huang, X., Sun, B., & Wang, G. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.08.049 · Cited by 82
Li, Z., Xiong, Y., Sun, S., Zhang, L., Li, S., Liu, X., Xu, Z., & Xu, S. (2018) · Journal of Membrane Science · doi:10.1016/j.memsci.2018.07.094 · Cited by 79
Conducting polymer paper-derived separators for lithium metal batteries
Wang, Z.-H., Pan, R., Xu, C.-D., Ruan, C.-Q., Edström, K., Strømme, M., & Nyholm, L. (2018) · Energy Storage Materials · doi:10.1016/j.ensm.2018.02.006 · Cited by 76
Electrospinning based all-nano composite materials: Recent achievements and perspectives
Zhao, R., Lu, X., & Wang, C. (2018) · Composites Communications · doi:10.1016/j.coco.2018.09.005 · Cited by 76
Lohmeijer, P. J. A., Goossens, H., & Peters, G. G. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44566 · Cited by 75
Shi, L., Zhang, J., Shen, G., Xu, Z., Peng, W., Zhang, Y., Xu, Q., & He, L. (2015) · Scientific Reports · doi:10.1038/srep15581 · Cited by 70
Li, X., Zhang, M., He, J., Wu, D., Meng, J., & Ni, P. (2014) · Journal of Membrane Science · doi:10.1016/j.memsci.2014.01.009 · Cited by 68
A Core@sheath Nanofibrous Separator for Lithium Ion Batteries Obtained by Coaxial Electrospinning
Liu, Z., Jiang, W., Kong, Q., Zhang, C., Han, P., Wang, X., Yao, J., & Cui, G. (2012) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200158 · Cited by 67
Diagnostic Studies of Polyolefin Separators in High-Power Li-Ion Cells
Kostecki, R. M., Norin, L., Song, X., & McLARNON, F. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1649233 · Cited by 61
Li, Y., & Pu, H. (2018) · Journal of Power Sources · doi:10.1016/j.jpowsour.2018.02.086 · Cited by 60
Zhu, Y., Yin, M., Liu, H., Na, B., Lv, R., Wang, B., & Huang, Y. (2016) · Composites Part B Engineering · doi:10.1016/j.compositesb.2016.12.025 · Cited by 57
Composite melt-blown nonwoven fabrics with large pore size as Li-ion battery separator
Wang, H., Zhang, Y., Gao, H., Jin, X., & Xie, X. (2015) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2015.09.130 · Cited by 51
Liu, M., Zhang, P., Gou, L., Hou, Z., & Huang, B. (2017) · Materials Letters · doi:10.1016/j.matlet.2017.05.031 · Cited by 50
Fang, L., Shi, J., Li, H. M., Zhu, B., & Zhu, L. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41036 · Cited by 49
One-step melt blowing process for PP/PEG micro-nanofiber filters with branch networks
Zhang, H., Zhen, Q., Liu, Y., Liu, R., & Zhang, Y. (2019) · Results in Physics · doi:10.1016/j.rinp.2019.01.012 · Cited by 49
A flexible zirconium oxide based-ceramic membrane as a separator for lithium-ion batteries
Suriyakumar, S., Raja, M., Angulakshmi, N., Nahm, K. S., & Stephan, A. M. (2016) · RSC Advances · doi:10.1039/c6ra19168a · Cited by 43
Electrospinning: A versatile strategy for mimicking natural creatures
Cui, F., Han, W., Ge, J., Wu, X., Kim, H. Y., & Ding, B. (2018) · Composites Communications · doi:10.1016/j.coco.2018.10.001 · Cited by 42
Low temperature performance of LiFePO4 cathode material for Li-ion batteries
Chang, W., Kim, S. J., Park, I.-T., Cho, B., Chung, K., & Shin, H.-C. (2013) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2013.02.143 · Cited by 40
Li, H., Li, G., Lee, Y., Tuan, H., & Liu, Y. (2016) · Energy Technology · doi:10.1002/ente.201500368 · Cited by 40
Chao, C., Feng, Y., Hua, K., Li, H. M., Wu, L., Zhou, Y., & Dong, Z. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46478 · Cited by 29
Pereira, R. F. P., Gonçalves, R., Fernandes, M. S. P., Costa, C. M., Silva, M. M. P., Bermudez, V. D. Z., & Lanceros-Méndez, S. (2018) · Advanced Sustainable Systems · doi:10.1002/adsu.201800098 · Cited by 19
Ichikawa, S., & Kawai, T. (2017) · Polymer · doi:10.1016/j.polymer.2017.08.006 · Cited by 4
Cited by
High-safety separators for lithium-ion batteries and sodium-ion batteries: advances and perspective
Zhang, L., Li, X., Yang, M., & Chen, W. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2021.06.033 · Cited by 587
Challenges and advances in wide-temperature rechargeable lithium batteries
Feng, Y., Zhou, L., Ma, H., Wu, Z., Zhao, Q., Li, H., Zhang, K., & Chen, J. (2022) · Energy & Environmental Science · doi:10.1039/d1ee03292e · Cited by 517
Emerging Chemistry for Wide-Temperature Sodium-Ion Batteries
Zhang, F., He, B., Xin, Y., Zhu, T., Zhang, Y., Wang, S., Li, W., Yang, Y., & Tian, H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00728 · Cited by 357
Chang, X., Zhou, X., Ou, X., Lee, C., Zhou, J., & Tang, Y. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201902672 · Cited by 263
Safer Lithium‐Ion Batteries from the Separator Aspect: Development and Future Perspectives
Liu, Z., Jiang, Y., Hu, Q., Guo, S., Yu, L., Li, Q., Liu, Q., & Hu, X. (2021) · ENERGY & ENVIRONMENTAL MATERIALS · doi:10.1002/eem2.12129 · Cited by 253
Metadata
- Authors
- Waqas, M., Ali, S., Feng, C., Chen, D., Han, J., & He, W.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2019-05-22
- Volume
- 15
- Issue
- 33
- Pages
- e1901689-e1901689
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W2944855756
- Cited by
- 280
- References
- 108
- FWCI
- 10.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.