The DOI matches its Crossref record; 265 of the 265 references it cites were found in a registry or an index.
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
Open accessAbstract
Three‐dimensional (3D) bioprinting has recently advanced as an important tool to produce viable constructs that can be used for regenerative purposes or as tissue models. To develop biomimetic and sustainable 3D constructs, several important processing aspects need to be considered, among which crosslinking is most important for achieving desirable biomechanical stability of printed structures, which is reflected in subsequent behavior and use of these constructs. In this work, crosslinking methods used in 3D bioprinting studies are reviewed, parameters that affect bioink chemistry are discussed, and the potential toward improving crosslinking outcomes and construct performance is highlighted. Furthermore, current challenges and future prospects are discussed. Due to the direct connection between crosslinking methods and properties of 3D bioprinted structures, this Review can provide a basis for developing necessary modifications to the design and manufacturing process of advanced tissue‐like constructs in future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–265 of 265
Liu, X., Carter, S. D., Renes, M. J., Kim, J., Rojas‐Canales, D. M., Penko, D., Angus, C., Beirne, S., Drogemuller, C., Yue, Z., et al. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801181 · Cited by 105
Hydrogel-based reinforcement of 3D bioprinted constructs
Melchels, F. P. W., Blokzijl, M. M., Levato, R., Peiffer, Q. C., de Ruijter, M., Hennink, W. E., Vermonden, T., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035004 · Cited by 104
Combined experimental and computational characterization of crosslinked collagen-based hydrogels
Valero, C., Amaveda, H., Mora, M., & García‐Aznar, J. M. (2018) · PLoS ONE · doi:10.1371/journal.pone.0195820 · Cited by 103
Ahlfeld, T., Doberenz, F., Kilian, D., Vater, C., Korn, P., Lauer, G., Lode, A., & Gelinsky, M. (2018) · Biofabrication · doi:10.1088/1758-5090/aad36d · Cited by 103
Three-Dimensional Bioprinting of Oppositely Charged Hydrogels with Super Strong Interface Bonding
Li, H., Tan, Y. J., Liu, S., & Li, L. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19730 · Cited by 102
Engineering muscle cell alignment through 3D bioprinting
Mozetic, P., Giannitelli, S. M., Gori, M., Trombetta, M., & Rainer, A. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36117 · Cited by 101
Carletto, R. P., Ko, S. K., Caviglia, C., Wolff, A., Emnéus, J., Keller, S. S., & Dufva, M. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.10.047 · Cited by 101
van der Valk, D. C., van der Ven, C. F. T., Blaser, M. C., Grolman, J. M., Wu, P.-J., Fenton, O. S., Lee, L. H., Tibbitt, M. W., Andresen, J. L., Wen, J., et al. (2018) · Nanomaterials · doi:10.3390/nano8050296 · Cited by 100
In situ three-dimensional printing for reparative and regenerative therapy
Ashammakhi, N. A., Ahadian, S., Pountos, I., Hu, S.-K., Tellisi, N., Bandaru, P., Ostrovidov, S., Dokmeci, M. R., & Khademhosseini, A. (2019) · Biomedical Microdevices · doi:10.1007/s10544-019-0372-2 · Cited by 99
Self-citationBruchet, M., & Melman, A. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.05.021 · Cited by 98
3D Bioprinting Technologies for Tissue Engineering Applications
Gu, B. K., Choi, D. J., Park, S. J., Kim, Y., & Kim, C. (2018) · Advances in experimental medicine and biology · doi:10.1007/978-981-13-0950-2_2 · Cited by 96
Gelling Concept Combining Chitosan and Alginate—Proof of Principle
Khong, T. T., Aarstad, O. A., Skjåk‐Bræk, G., Draget, K. I., & Vårum, K. M. (2013) · Biomacromolecules · doi:10.1021/bm400610b · Cited by 93
Surface Engineered Biomimetic Inks Based on UV Cross-Linkable Wood Biopolymers for 3D Printing
Xu, W., Zhang, X., Yang, P., Långvik, O., Wang, X., Zhang, Y., Cheng, F., Österberg, M., Willför, S. M., & Xu, C. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b03442 · Cited by 93
Kuo, C., Eranki, A., Placone, J. K., Rhodes, K. R., Aranda‐Espinoza, H., Fernandes, R., Fisher, J. P., & Kim, P. C. W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00031 · Cited by 92
Sakai, S., Ohi, H., Hotta, T., Kamei, H., & Taya, M. (2017) · Biopolymers · doi:10.1002/bip.23080 · Cited by 92
Dynamic Hydrogels and Polymers as Inks for Three-Dimensional Printing
Heidarian, P., Kouzani, A. Z., Kaynak, A., Paulino, M., & Nasri‐Nasrabadi, B. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b00047 · Cited by 92
Inkjet–Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures
Yoon, S., Park, J. A., Lee, H., Yoon, W., Hwang, D. S., & Jung, S. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201800050 · Cited by 90
Key components of engineering vascularized 3-dimensional bioprinted bone constructs
Shahabipour, F., Ashammakhi, N. A., Oskuee, R. K., Bonakdar, S., Hoffman, T., Shokrgozar, M. A., & Khademhosseini, A. (2019) · Translational research · doi:10.1016/j.trsl.2019.08.010 · Cited by 88
Self-citationSakai, S., Kamei, H., Mori, T., Hotta, T., Ohi, H., Nakahata, M., & Taya, M. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.7b01827 · Cited by 84
Shi, L., Hu, Y., Ullah, M. W., Ullah, I., Ou, H., Zhang, W., Liming, X., & Zhang, X. (2019) · Biofabrication · doi:10.1088/1758-5090/ab15a9 · Cited by 83
3D Printing of Thermo-Responsive Methylcellulose Hydrogels for Cell-Sheet Engineering
Cochis, A., Bonetti, L., Sorrentino, R., Negrini, N. C., Grassi, F. A., Leigheb, M., Rimondini, L., & Farè, S. (2018) · Materials · doi:10.3390/ma11040579 · Cited by 82
Lin, H.-H., Hsieh, F.-Y., Tseng, C., & Hsu, S. (2016) · Journal of Materials Chemistry B · doi:10.1039/c6tb01501h · Cited by 81
A High Strength Self-Healable Antibacterial and Anti-Inflammatory Supramolecular Polymer Hydrogel
Wang, H., Zhu, H. J., Fu, W., Zhang, Y., Xu, B., Gao, F., Cao, Z., & Liu, W. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201600695 · Cited by 81
Mechanical characterization of bioprinted in vitro soft tissue models
Zhang, T., Yan, K. C., Ouyang, L., & Sun, W. (2013) · Biofabrication · doi:10.1088/1758-5082/5/4/045010 · Cited by 79
Engineering Photocrosslinkable Bicomponent Hydrogel Constructs for Creating 3D Vascularized Bone
Kazemzadeh‐Narbat, M., Rouwkema, J., Annabi, N., Cheng, H., Ghaderi, M., Cha, B., Aparnathi, M. K., Khalilpour, A., Byambaa, B., Jabbari, E., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601122 · Cited by 77
Self-citationEnzymatic, physicochemical and biological properties of MMP-sensitive alginate hydrogels
Fonseca, K. B., Maia, F. R., da Cruz, F. A. N., Andrade, D., Juliano, M. A., Granja, P. L., & Barrias, C. C. (2013) · Soft Matter · doi:10.1039/c3sm27560d · Cited by 73
Li, H., Tan, Y. J., & Li, L. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.06.081 · Cited by 70
Dang, Q., Lu, S., Shen, Y., Sun, P., & Yuan, Z. (2010) · Biomacromolecules · doi:10.1021/bm1002398 · Cited by 66
Wang, Y., Wu, S., Kuss, M. A., Streubel, P. N., & Duan, B. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00101 · Cited by 64
Romanazzo, S., Vedicherla, S., Moran, C. J., & Kelly, D. J. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2602 · Cited by 63
3D bioprinting of cell-laden scaffolds for intervertebral disc regeneration
Hu, D., Wu, D., Huang, L., Jiao, Y., Li, L., Lu, L., & Zhou, C. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.03.204 · Cited by 63
Ahlfeld, T., Schuster, F., Förster, Y., Quade, M., Akkineni, A. R., Rentsch, C., Rammelt, S., Gelinsky, M., & Lode, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801512 · Cited by 63
Loebel, C., Broguière, N., Alini, M., Zenobi‐Wong, M., & Eglin, D. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00363 · Cited by 61
Kerscher, P., Kaczmarek, J. A., Head, S. E., Ellis, M. E., Seeto, W. J., Kim, J., Bhattacharya, S., Suppiramaniam, V. D., & Lipke, E. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00226 · Cited by 61
Peptide modification of purified gellan gum
Ferris, C. J., Stevens, L. R., Gilmore, K. J., Mume, E., Greguric, I. D., Kirchmajer, D. M., Wallace, G. G., & Panhuis, M. I. H. (2014) · Journal of Materials Chemistry B · doi:10.1039/c4tb01727g · Cited by 60
Du, Z., Li, N., Hua, Y., Yong Quan, S. H. I., Bao, C., Zhang, H., Yang, Y. A., Lin, Q., & Zhu, L. (2017) · Chemical Communications · doi:10.1039/c7cc08225h · Cited by 60
A dual crosslinking strategy to tailor rheological properties of gelatin methacryloyl
Zhou, M., Lee, B. H., & Tan, L. P. (2017) · International Journal of Bioprinting · doi:10.18063/ijb.2017.02.003 · Cited by 59
Novel crosslinked alginate/hyaluronic acid hydrogels for nerve tissue engineering
Wang, M., Zhai, P. C., Schreyer, D. J., Zheng, R.-S., Sun, X., Cui, F., & Chen, D. (2013) · Frontiers of Materials Science · doi:10.1007/s11706-013-0211-y · Cited by 57
Wang, Z., Jin, X., Tian, Z., Ménard, F., Holzman, J. F., & Kim, K. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701249 · Cited by 57
Laser-Assisted Bioprinting for Tissue Engineering
Guillotin, B., Ali, M., Ducom, A., Catros, S., Kériquel, V., Souquet, A., Rémy, M., Fricain, J., & Guillemot, F. (2013) · Elsevier eBooks · doi:10.1016/b978-1-4557-2852-7.00006-8 · Cited by 56
Kageyama, T., Osaki, T., Enomoto, J., Myasnikova, D. A., Nittami, T., Hozumi, T., Ito, T., & Fukuda, J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00203 · Cited by 54
Celikkin, N., Padial, J. S., Costantini, M., Hendrikse, H. C., Cohn, R., Wilson, C. J., Rowan, A. E., & Święszkowski, W. (2018) · Polymers · doi:10.3390/polym10050555 · Cited by 54
Drop‐On‐Drop Multimaterial 3D Bioprinting Realized by Peroxidase‐Mediated Cross‐Linking
Sakai, S., Ueda, K., Gantumur, E., Taya, M., & Nakamura, M. (2017) · Macromolecular Rapid Communications · doi:10.1002/marc.201700534 · Cited by 53
Yan, M., Lewis, P. L., & Shah, R. N. (2018) · Biofabrication · doi:10.1088/1758-5090/aac902 · Cited by 52
Behavior and properties of neat and filled gelatins
Usta, M., Piech, D., MacCrone, R. K., & Hillig, W. B. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00274-0 · Cited by 50
Effects of tunable, 3D-bioprinted hydrogels on human brown adipocyte behavior and metabolic function
Kuss, M. A., Kim, J., Qi, D., Wu, S., Lei, Y., Chung, S., & Duan, B. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.03.021 · Cited by 50
Izadifar, M., Babyn, P., Kelly, M., Chapman, D., & Chen, D. (2017) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2017.0222 · Cited by 48
Digital Plasmonic Patterning for Localized Tuning of Hydrogel Stiffness
Hribar, K. C., Choi, Y. S., Ondeck, M. G., Engler, A. J., & Chen, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201400274 · Cited by 47
Cytocompatibility testing of hydrogels toward bioprinting of mesenchymal stem cells
Benning, L., Gutzweiler, L., Tröndle, K., Riba, J., Zengerle, R., Koltay, P., Zimmermann, S., Stark, G. B., & Finkenzeller, G. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36179 · Cited by 43
GhavamiNejad, A., Hashmi, S., Joh, H., Lee, S., Lee, Y., Vatankhah‐Varnoosfaderani, M., & Stadler, F. J. (2014) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp55092c · Cited by 42
Self-citationBiochemical and Biophysical Cues in Matrix Design for Chronic and Diabetic Wound Treatment
Xiao, Y., Ahadian, S., & Radisic, M. (2016) · Tissue engineering. Part B, Reviews · doi:10.1089/ten.teb.2016.0200 · Cited by 39
Thayer, P., Orrhult, L. S., & Martínez, H. (2018) · Journal of Visualized Experiments · doi:10.3791/56372-v · Cited by 36
Effect of a functional polymer on the rheology and microstructure of sodium alginate
Du, L., GhavamiNejad, A., Yan, Z., Biswas, C. S., & Stadler, F. J. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.07.001 · Cited by 36
Self-citationMüller, W. E. G., Schröder, H. C., Feng, Q., Schloßmacher, U., Link, T., & Wang, X. (2013) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1745 · Cited by 34
Formulation and Characterization of a SIS-Based Photocrosslinkable Bioink
Serna, J. A., Florez, S. L., Nio, V. A. T., Briceño, J. C., Muñoz-Camargo, C., & Cruz, J. C. (2019) · Polymers · doi:10.3390/polym11030569 · Cited by 34
In vitro evaluation of 3D bioprinted tri‐polymer network scaffolds for bone tissue regeneration
Bendtsen, S. T., & Wei, M. (2017) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36184 · Cited by 32
Roth, A., Lama, P., Dunn, S. P., Hong, S., & Lee, M. (2018) · Materials Science and Engineering C · doi:10.1016/j.msec.2018.04.092 · Cited by 31
Vatankhah‐Varnoosfaderani, M., GhavamiNejad, A., Hashmi, S., & Stadler, F. J. (2015) · Macromolecular Rapid Communications · doi:10.1002/marc.201400501 · Cited by 30
Self-citationGhavamiNejad, A., Hashmi, S., Vatankhah‐Varnoosfaderani, M., & Stadler, F. J. (2016) · Rheologica Acta · doi:10.1007/s00397-015-0906-3 · Cited by 28
Self-citationPerfusion directed 3D mineral formation within cell-laden hydrogels
Sawyer, S. W., Shridhar, S. V., Zhang, K., Albrecht, L. D., Filip, A., Horton, J. A., & Soman, P. (2018) · Biofabrication · doi:10.1088/1758-5090/aacb42 · Cited by 27
Cross sectional survey on the concerns and anxiety of patients waiting for organ transplants
Li, P. K., Chu, K. H., Chow, K. M., et al. (2012) · Nephrology · doi:10.1111/j.1440-1797.2012.01615.x · Cited by 26
Laser printing-enabled direct creation of cellular heterogeneity in lab-on-a-chip devices
Xiong, R., Chai, W., & Huang, Y. H. (2019) · Lab on a Chip · doi:10.1039/c9lc00117d · Cited by 21
Ding, H., Tourlomousis, F., & Chang, R. C. (2017) · Biomedical Physics & Engineering Express · doi:10.1088/2057-1976/aa70f0 · Cited by 20
End-Stage Organ Failure: Will Regenerative Medicine Keep its Promise?
Triolo, F., & Gridelli, B. G. (2006) · Cell Transplantation · doi:10.3727/000000006783982340 · Cited by 19
Croce, N., Bernardini, S., Cecca, S. D., Caltagirone, C., & Angelucci, F. (2013) · Journal of Neuroscience Methods · doi:10.1016/j.jneumeth.2013.04.009 · Cited by 13
Cited by
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Alavarse, A. C., Frachini, E. C. G., da Silva, R. L. C. G., Lima, V. H., Shavandi, A., & Petri, D. F. S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.01.029 · Cited by 395
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Metadata
- Authors
- GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2020-07-30
- Volume
- 16
- Issue
- 35
- Pages
- e2002931-e2002931
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W3046566005
- Cited by
- 400
- References
- 265
- FWCI
- 13.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.