The DOI matches its Crossref record; 265 of the 265 references it cites were found in a registry or an index.
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
Open accessAbstract
Three‐dimensional (3D) bioprinting has recently advanced as an important tool to produce viable constructs that can be used for regenerative purposes or as tissue models. To develop biomimetic and sustainable 3D constructs, several important processing aspects need to be considered, among which crosslinking is most important for achieving desirable biomechanical stability of printed structures, which is reflected in subsequent behavior and use of these constructs. In this work, crosslinking methods used in 3D bioprinting studies are reviewed, parameters that affect bioink chemistry are discussed, and the potential toward improving crosslinking outcomes and construct performance is highlighted. Furthermore, current challenges and future prospects are discussed. Due to the direct connection between crosslinking methods and properties of 3D bioprinted structures, this Review can provide a basis for developing necessary modifications to the design and manufacturing process of advanced tissue‐like constructs in future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Langer, R., & Vacanti, J. P. (1993) · Science · doi:10.1126/science.8493529 · Cited by 9,893
3D bioprinting of tissues and organs
Murphy, S. V., & Atala, A. (2014) · Nature Biotechnology · doi:10.1038/nbt.2958 · Cited by 7,034
Polymers for 3D Printing and Customized Additive Manufacturing
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mülhaupt, R. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00074 · Cited by 3,741
A 3D bioprinting system to produce human-scale tissue constructs with structural integrity
Kang, H.-W., Lee, S. J., Ko, I. K., Kengla, C., Yoo, J. J., & Atala, A. (2016) · Nature Biotechnology · doi:10.1038/nbt.3413 · Cited by 2,622
3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Hinton, T. J., Jallerat, Q., Palchesko, R. N., Park, J. H., Grodzicki, M. S., Shue, H.-J., Ramadan, M. H., Hudson, A. R., & Feinberg, A. W. (2015) · Science Advances · doi:10.1126/sciadv.1500758 · Cited by 1,805
3D bioprinting for engineering complex tissues
Mandrycky, C., Wang, Z., Kim, K., & Kim, D.-H. (2016) · Biotechnology Advances · doi:10.1016/j.biotechadv.2015.12.011 · Cited by 1,754
Markstedt, K., Mantas, A., Tournier, I., Martínez Ávila, H., Hägg, D., & Gatenholm, P. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b00188 · Cited by 1,528
Three-dimensional bioprinting of thick vascularized tissues
Kolesky, D. B., Homan, K. A., Skylar-Scott, M. A., & Lewis, J. A. (2016) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1521342113 · Cited by 1,492
Thiol–enes: Chemistry of the past with promise for the future
Hoyle, C. E., Lee, T. Y., & Roper, T. (2004) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.20366 · Cited by 1,457
Photopolymerization in 3D Printing
Bagheri, A., & Jin, J. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.8b00165 · Cited by 1,436
Bioinks for 3D bioprinting: an overview
Gungor-Ozkerim, P. S., Inci, I., Zhang, Y. S., Khademhosseini, A., & Dokmeci, M. R. (2018) · Biomaterials Science · doi:10.1039/c7bm00765e · Cited by 1,428
Self-citationMultivascular networks and functional intravascular topologies within biocompatible hydrogels
Grigoryan, B., Paulsen, S. J., Corbett, D. C., Sazer, D. W., Fortin, C. L., Zaita, A. J., Greenfield, P. T., Calafat, N. J., Gounley, J. P., Ta, A. H., et al. (2019) · Science · doi:10.1126/science.aav9750 · Cited by 1,396
Alginate-Based Biomaterials for Regenerative Medicine Applications
Sun, J., & Tan, H. (2013) · Materials · doi:10.3390/ma6041285 · Cited by 1,361
Fairbanks, B. D., Schwartz, M. P., Bowman, C. N., & Anseth, K. S. (2009) · Biomaterials · doi:10.1016/j.biomaterials.2009.08.055 · Cited by 1,200
Ouyang, L., Yao, R., Zhao, Y., & Sun, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035020 · Cited by 1,045
3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels
Duan, B., Hockaday, L. A., Kang, K. H., & Butcher, J. T. (2013) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.34420 · Cited by 1,002
Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing
Kim, S. H., Yeon, Y. K., Lee, J. M., Chao, J. R., Lee, Y. J., Seo, Y. B., Sultan, M. T., Lee, O. J., Lee, J. S., Yoon, S.-I., et al. (2018) · Nature Communications · doi:10.1038/s41467-018-03759-y · Cited by 972
Bioprinting 3D microfibrous scaffolds for engineering endothelialized myocardium and heart-on-a-chip
Zhang, Y. S., Arneri, A., Bersini, S., Shin, S.-R., Zhu, K., Goli-Malekabadi, Z., Aleman, J., Colosi, C., Busignani, F., Dell'Erba, V., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.09.003 · Cited by 951
Self-citationPaxton, N., Smolan, W., Böck, T., Melchels, F., Groll, J., & Jungst, T. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8dd8 · Cited by 950
Hydrogel bioprinted microchannel networks for vascularization of tissue engineering constructs
Bertassoni, L. E., Cecconi, M., Manoharan, V., Nikkhah, M., Hjortnaes, J., Cristino, A. L., Barabaschi, G., Demarchi, D., Dokmeci, M. R., Yang, Y., et al. (2014) · Lab Chip · doi:10.1039/c4lc00030g · Cited by 944
Self-citationDirect 3D bioprinting of perfusable vascular constructs using a blend bioink
Jia, W., Gungor-Ozkerim, P. S., Zhang, Y. S., Yue, K., Zhu, K., Liu, W., Pi, Q., Byambaa, B., Dokmeci, M. R., Shin, S. R., et al. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.07.038 · Cited by 922
Self-citationAdvances in crosslinking strategies of biomedical hydrogels
Hu, W., Wang, Z., Xiao, Y., Zhang, S., & Wang, J. (2019) · Biomaterials Science · doi:10.1039/c8bm01246f · Cited by 896
Effect of Ca2+, Ba2+, and Sr2+ on Alginate Microbeads
Mørch, Ý. A., Donati, I., Strand, B. L., & Skjåk-Bræk, G. (2006) · Biomacromolecules · doi:10.1021/bm060010d · Cited by 863
Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink
Colosi, C., Shin, S. R., Manoharan, V., Massa, S., Costantini, M., Barbetta, A., Dokmeci, M. R., Dentini, M., & Khademhosseini, A. (2016) · Advanced Materials · doi:10.1002/adma.201503310 · Cited by 863
Self-citationBlaeser, A., Duarte Campos, D. F., Puster, U., Richtering, W., Stevens, M. M., & Fischer, H. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201500677 · Cited by 808
Schuurman, W., Levett, P. A., Pot, M. W., van Weeren, P. R., Dhert, W. J. A., Hutmacher, D. W., Melchels, F. P. W., Klein, T. J., & Malda, J. (2013) · Macromolecular Bioscience · doi:10.1002/mabi.201200471 · Cited by 790
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Biomimetic 3D-printed scaffolds for spinal cord injury repair
Koffler, J., Zhu, W., Qu, X., Platoshyn, O., Dulin, J. N., Brock, J., Graham, L., Lu, P., Sakamoto, J., Marsala, M., et al. (2019) · Nature Medicine · doi:10.1038/s41591-018-0296-z · Cited by 708
Direct Human Cartilage Repair Using Three-Dimensional Bioprinting Technology
Cui, X., Breitenkamp, K., Finn, M. G., Lotz, M., & D'Lima, D. D. (2012) · Tissue Engineering Part A · doi:10.1089/ten.tea.2011.0543 · Cited by 686
Bishop, E. S., Mostafa, S., Pakvasa, M., Luu, H. H., Lee, M. J., Wolf, J. M., Ameer, G. A., He, T.-C., & Reid, R. R. (2017) · Genes & Diseases · doi:10.1016/j.gendis.2017.10.002 · Cited by 683
Novel Biocompatible Polysaccharide‐Based Self‐Healing Hydrogel
Wei, Z., Yang, J. H., Liu, Z. Q., Xu, F., Zhou, J. X., Zrínyi, M., Osada, Y., & Chen, Y. M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201401502 · Cited by 660
Research on the printability of hydrogels in 3D bioprinting
He, Y., Yang, F., Zhao, H., Gao, Q., Xia, B., & Fu, J. (2016) · Scientific Reports · doi:10.1038/srep29977 · Cited by 654
Direct-write bioprinting of cell-laden methacrylated gelatin hydrogels
Bertassoni, L. E., Cardoso, J. C., Manoharan, V., Cristino, A. L., Bhise, N. S., Araujo, W. A., Zorlutuna, P., Vrana, N. E., Ghaemmaghami, A. M., Dokmeci, M. R., et al. (2014) · Biofabrication · doi:10.1088/1758-5082/6/2/024105 · Cited by 642
Self-citationWang, Z., Abdulla, R., Parker, B., Samanipour, R., Ghosh, S., & Kim, K. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045009 · Cited by 633
3D bioprinting of tissues and organs for regenerative medicine
Vijayavenkataraman, S., Yan, W.-C., Lu, W. F., Wang, C.-H., & Fuh, J. Y. H. (2018) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2018.07.004 · Cited by 630
A liver-on-a-chip platform with bioprinted hepatic spheroids
Bhise, N. S., Manoharan, V., Massa, S., Tamayol, A., Ghaderi, M., Miscuglio, M., Lang, Q., Shrike Zhang, Y., Shin, S. R., Calzone, G., et al. (2016) · Biofabrication · doi:10.1088/1758-5090/8/1/014101 · Cited by 615
Self-citationEnzyme-catalyzed crosslinkable hydrogels: Emerging strategies for tissue engineering
Moreira Teixeira, L. S., Feijen, J., van Blitterswijk, C. A., Dijkstra, P. J., & Karperien, M. (2012) · Biomaterials · doi:10.1016/j.biomaterials.2011.10.067 · Cited by 615
Bio-ink properties and printability for extrusion printing living cells
Chung, J. H. Y., Naficy, S., Yue, Z., Kapsa, R., Quigley, A., Moulton, S. E., & Wallace, G. G. (2013) · Biomaterials Science · doi:10.1039/c3bm00012e · Cited by 610
Skin tissue generation by laser cell printing
Koch, L., Deiwick, A., Schlie, S., Michael, S., Gruene, M., Coger, V., Zychlinski, D., Schambach, A., Reimers, K., Vogt, P. M., et al. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24455 · Cited by 609
3D Printing of Shear-Thinning Hyaluronic Acid Hydrogels with Secondary Cross-Linking
Ouyang, L., Highley, C. B., Rodell, C. B., Sun, W., & Burdick, J. A. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00158 · Cited by 607
Current and emerging applications of 3D printing in medicine
Liaw, C.-Y., & Guvendiren, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7279 · Cited by 604
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Yin, J., Yan, M., Wang, Y., Fu, J., & Suo, H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b16059 · Cited by 598
A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels
Rutz, A. L., Hyland, K. E., Jakus, A. E., Burghardt, W. R., & Shah, R. N. (2015) · Advanced Materials · doi:10.1002/adma.201405076 · Cited by 572
Direct 3D bioprinting of prevascularized tissue constructs with complex microarchitecture
Zhu, W., Qu, X., Zhu, J., Ma, X., Patel, S., Liu, J., Wang, P., Lai, C. S. E., Gou, M., Xu, Y., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.01.042 · Cited by 567
Kundu, J., Shim, J.-H., Jang, J., Kim, S.-W., & Cho, D.-W. (2015) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.1682 · Cited by 552
Bioinks and bioprinting technologies to make heterogeneous and biomimetic tissue constructs
Ashammakhi, N., Ahadian, S., Xu, C., Montazerian, H., Ko, H., Nasiri, R., Barros, N., & Khademhosseini, A. (2019) · Materials Today Bio · doi:10.1016/j.mtbio.2019.100008 · Cited by 549
Self-citationThree-dimensional printing of Hela cells for cervical tumor model in vitro
Zhao, Y., Yao, R., Ouyang, L., Ding, H., Zhang, T., Zhang, K., Cheng, S., & Sun, W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035001 · Cited by 534
Ouyang, L., Highley, C. B., Sun, W., & Burdick, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201604983 · Cited by 524
Extrusion Bioprinting of Shear‐Thinning Gelatin Methacryloyl Bioinks
Liu, W., Heinrich, M. A., Zhou, Y., Akpek, A., Hu, N., Liu, X., Guan, X., Zhong, Z., Jin, X., Khademhosseini, A., et al. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601451 · Cited by 503
Self-citation4D Biofabrication Using Shape‐Morphing Hydrogels
Kirillova, A., Maxson, R., Stoychev, G., Gomillion, C. T., & Ionov, L. (2017) · Advanced Materials · doi:10.1002/adma.201703443 · Cited by 494
4D printing smart biomedical scaffolds with novel soybean oil epoxidized acrylate
Miao, S., Zhu, W., Castro, N. J., Nowicki, M., Zhou, X., Cui, H., Fisher, J. P., & Zhang, L. G. (2016) · Scientific Reports · doi:10.1038/srep27226 · Cited by 477
Faulkner-Jones, A., Fyfe, C., Cornelissen, D.-J., Gardner, J., King, J., Courtney, A., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044102 · Cited by 474
3D printing of layered brain-like structures using peptide modified gellan gum substrates
Lozano, R., Stevens, L., Thompson, B. C., Gilmore, K. J., Gorkin, R., Stewart, E. M., in het Panhuis, M., Romero-Ortega, M., & Wallace, G. G. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.07.022 · Cited by 445
A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage
Daly, A. C., Critchley, S. E., Rencsok, E. M., & Kelly, D. J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045002 · Cited by 436
Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting
Miri, A. K., Nieto, D., Iglesias, L., Goodarzi Hosseinabadi, H., Maharjan, S., Ruiz‐Esparza, G. U., Khoshakhlagh, P., Manbachi, A., Dokmeci, M. R., Chen, S., et al. (2018) · Advanced Materials · doi:10.1002/adma.201800242 · Cited by 431
Self-citationModified Gellan Gum hydrogels with tunable physical and mechanical properties
Coutinho, D. F., Sant, S. V., Shin, H., Oliveira, J. T., Gomes, M. E., Neves, N. M., Khademhosseini, A., & Reis, R. L. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.06.035 · Cited by 430
Self-citationLi, C., Faulkner‐Jones, A., Dun, A. R., Jin, J., Chen, P., Xing, Y., Yang, Z., Li, Z., Shu, W., Liu, D., et al. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201411383 · Cited by 423
Hsieh, F.-Y., Lin, H.-H., & Hsu, S.-H. (2015) · Biomaterials · doi:10.1016/j.biomaterials.2015.08.028 · Cited by 420
3D bioprinting of a corneal stroma equivalent
Isaacson, A., Swioklo, S., & Connon, C. J. (2018) · Experimental Eye Research · doi:10.1016/j.exer.2018.05.010 · Cited by 419
Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation
Wu, Z., Su, X., Xu, Y., Kong, B., Sun, W., & Mi, S. (2016) · Scientific Reports · doi:10.1038/srep24474 · Cited by 418
Fundamentals and Applications of Photo-Cross-Linking in Bioprinting
Lim, K. S., Galarraga, J. H., Cui, X., Lindberg, G. C. J., Burdick, J. A., & Woodfield, T. B. F. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00812 · Cited by 416
Fedorovich, N. E., Schuurman, W., Wijnberg, H. M., Prins, H.-J., van Weeren, P. R., Malda, J., Alblas, J., & Dhert, W. J. A. (2012) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2011.0060 · Cited by 403
Bioprinted Osteogenic and Vasculogenic Patterns for Engineering 3D Bone Tissue
Byambaa, B., Annabi, N., Yue, K., Trujillo‐de Santiago, G., Alvarez, M. M., Jia, W., Kazemzadeh‐Narbat, M., Shin, S. R., Tamayol, A., & Khademhosseini, A. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700015 · Cited by 394
Self-citationThree-dimensional bioprinting of complex cell laden alginate hydrogel structures
Tabriz, A. G., Hermida, M. A., Leslie, N. R., & Shu, W. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045012 · Cited by 393
Gold Nanocomposite Bioink for Printing 3D Cardiac Constructs
Zhu, K., Shin, S. R., van Kempen, T., Li, Y., Ponraj, V., Nasajpour, A., Mandla, S., Hu, N., Liu, X., Leijten, J., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201605352 · Cited by 386
Self-citationSorkio, A., Koch, L., Koivusalo, L., Deiwick, A., Miettinen, S., Chichkov, B., & Skottman, H. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.04.034 · Cited by 381
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2008) · Tissue Engineering Part A · doi:10.1089/tea.2007.0173 · Cited by 378
Bio-inks for 3D bioprinting: recent advances and future prospects
Donderwinkel, I., van Hest, J. C. M., & Cameron, N. R. (2017) · Polymer Chemistry · doi:10.1039/c7py00826k · Cited by 378
A bioprintable form of chitosan hydrogel for bone tissue engineering
Demirtaş, T. T., Irmak, G., & Gümüşderelioğlu, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7b1d · Cited by 376
Nanostructured Pluronic hydrogels as bioinks for 3D bioprinting
Müller, M., Becher, J., Schnabelrauch, M., & Zenobi-Wong, M. (2015) · Biofabrication · doi:10.1088/1758-5090/7/3/035006 · Cited by 371
Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting
Wilson, S. A., Cross, L. M., Peak, C. W., & Gaharwar, A. K. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b13602 · Cited by 369
3D Bioprinting of Spatially Heterogeneous Collagen Constructs for Cartilage Tissue Engineering
Rhee, S., Puetzer, J. L., Mason, B. N., Reinhart-King, C. A., & Bonassar, L. J. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00288 · Cited by 364
New Visible-Light Photoinitiating System for Improved Print Fidelity in Gelatin-Based Bioinks
Lim, K. S., Schon, B. S., Mekhileri, N. V., Brown, G. C. J., Chia, C. M., Prabakar, S., Hooper, G. J., & Woodfield, T. B. F. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00149 · Cited by 362
Freeman, F. E., & Kelly, D. J. (2017) · Scientific Reports · doi:10.1038/s41598-017-17286-1 · Cited by 362
Mouser, V. H. M., Melchels, F. P. W., Visser, J., Dhert, W. J. A., Gawlitta, D., & Malda, J. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035003 · Cited by 359
Wüst, S., Godla, M. E., Müller, R., & Hofmann, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.10.016 · Cited by 357
3D bioprinting of methacrylated hyaluronic acid (MeHA) hydrogel with intrinsic osteogenicity
Poldervaart, M. T., Goversen, B., de Ruijter, M., Abbadessa, A., Melchels, F. P. W., Öner, F. C., Dhert, W. J. A., Vermonden, T., & Alblas, J. (2017) · PLOS ONE · doi:10.1371/journal.pone.0177628 · Cited by 357
Gao, G., Schilling, A. F., Yonezawa, T., Wang, J., Dai, G., & Cui, X. (2014) · Biotechnology Journal · doi:10.1002/biot.201400305 · Cited by 351
Jang, J., Kim, T. G., Kim, B. S., Kim, S.-W., Kwon, S.-M., & Cho, D.-W. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2016.01.013 · Cited by 344
Guo, B., Qu, J., Zhao, X., & Zhang, M. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.12.008 · Cited by 339
Bioprinting Endothelial Cells With Alginate for 3D Tissue Constructs
Khalil, S., & Sun, W. (2009) · Journal of Biomechanical Engineering · doi:10.1115/1.3128729 · Cited by 337
Gao, G., Lee, J. H., Jang, J., Lee, D. H., Kong, J., Kim, B. S., Choi, Y., Jang, W. B., Hong, Y. J., Kwon, S., et al. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700798 · Cited by 336
Thiol–Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies
Bertlein, S., Brown, G., Lim, K. S., Jungst, T., Boeck, T., Blunk, T., Tessmar, J., Hooper, G. J., Woodfield, T. B. F., & Groll, J. (2017) · Advanced Materials · doi:10.1002/adma.201703404 · Cited by 331
Costantini, M., Testa, S., Mozetic, P., Barbetta, A., Fuoco, C., Fornetti, E., Tamiro, F., Bernardini, S., Jaroszewicz, J., Święszkowski, W., et al. (2017) · Biomaterials · doi:10.1016/j.biomaterials.2017.03.026 · Cited by 330
3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel
Habib, A., Sathish, V., Mallik, S., & Khoda, B. (2018) · Materials · doi:10.3390/ma11030454 · Cited by 330
Gelatin-Based Materials in Ocular Tissue Engineering
Rose, J., Pacelli, S., Haj, A., Dua, H., Hopkinson, A., White, L., & Rose, F. (2014) · Materials · doi:10.3390/ma7043106 · Cited by 327
Levato, R., Webb, W. R., Otto, I. A., Mensinga, A., Zhang, Y., van Rijen, M., van Weeren, R., Khan, I. M., & Malda, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.08.005 · Cited by 326
3D Bioprinting a Cell-Laden Bone Matrix for Breast Cancer Metastasis Study
Zhou, X., Zhu, W., Nowicki, M., Miao, S., Cui, H., Holmes, B., Glazer, R. I., & Zhang, L. G. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b10673 · Cited by 307
3D bioprinted glioma stem cells for brain tumor model and applications of drug susceptibility
Dai, X., Ma, C., Lan, Q., & Xu, T. (2016) · Biofabrication · doi:10.1088/1758-5090/8/4/045005 · Cited by 301
Development of a clay based bioink for 3D cell printing for skeletal application
Ahlfeld, T., Cidonio, G., Kilian, D., Duin, S., Akkineni, A. R., Dawson, J. I., Yang, S., Lode, A., Oreffo, R. O. C., & Gelinsky, M. (2017) · Biofabrication · doi:10.1088/1758-5090/aa7e96 · Cited by 301
Evaluation of Cross-Linking Methods for Electrospun Gelatin on Cell Growth and Viability
Sisson, K., Zhang, C., Farach-Carson, M. C., Chase, D. B., & Rabolt, J. F. (2009) · Biomacromolecules · doi:10.1021/bm900036s · Cited by 297
Bio-resin for high resolution lithography-based biofabrication of complex cell-laden constructs
Lim, K. S., Levato, R., Costa, P. F., Castilho, M. D., Alcala-Orozco, C. R., van Dorenmalen, K. M. A., Melchels, F. P. W., Gawlitta, D., Hooper, G. J., Malda, J., et al. (2018) · Biofabrication · doi:10.1088/1758-5090/aac00c · Cited by 296
Kesti, M., Müller, M., Becher, J., Schnabelrauch, M., D’Este, M., Eglin, D., & Zenobi-Wong, M. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2014.09.033 · Cited by 294
3D Bioprinting in Skeletal Muscle Tissue Engineering
Ostrovidov, S., Salehi, S., Costantini, M., Suthiwanich, K., Ebrahimi, M., Sadeghian, R. B., Fujie, T., Shi, X., Cannata, S., Gargioli, C., et al. (2019) · Small · doi:10.1002/smll.201805530 · Cited by 294
Self-citationPolyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering
Ng, W. L., Yeong, W. Y., & Naing, M. W. (2024) · International Journal of Bioprinting · doi:10.18063/ijb.2016.01.009 · Cited by 293
Micro 3D Printing of a Temperature-Responsive Hydrogel Using Projection Micro-Stereolithography
Han, D., Lu, Z., Chester, S. A., & Lee, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-20385-2 · Cited by 290
Wang, L. L., Highley, C. B., Yeh, Y., Galarraga, J. H., Uman, S., & Burdick, J. A. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36323 · Cited by 286
3D Printing in Suspension Baths: Keeping the Promises of Bioprinting Afloat
McCormack, A., Highley, C. B., Leslie, N. R., & Melchels, F. P. W. (2020) · Trends in Biotechnology · doi:10.1016/j.tibtech.2019.12.020 · Cited by 284
Hyaluronic Acid and Dextran-Based Semi-IPN Hydrogels as Biomaterials for Bioprinting
Pescosolido, L., Schuurman, W., Malda, J., Matricardi, P., Alhaique, F., Coviello, T., van Weeren, P. R., Dhert, W. J. A., Hennink, W. E., & Vermonden, T. (2011) · Biomacromolecules · doi:10.1021/bm200178w · Cited by 280
Tissue Engineering by Self-Assembly of Cells Printed into Topologically Defined Structures
Jakab, K., Norotte, C., Damon, B., Marga, F., Neagu, A., Besch-Williford, C. L., Kachurin, A., Church, K. H., Park, H., Mironov, V., et al. (2007) · Tissue Engineering · doi:10.1089/ten.2007.0173 · Cited by 273
3D Bioprinting of Developmentally Inspired Templates for Whole Bone Organ Engineering
Daly, A. C., Cunniffe, G. M., Sathy, B. N., Jeon, O., Alsberg, E., & Kelly, D. J. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600182 · Cited by 272
Advances and Future Perspectives in 4D Bioprinting
Ashammakhi, N., Ahadian, S., Zengjie, F., Suthiwanich, K., Lorestani, F., Orive, G., Ostrovidov, S., & Khademhosseini, A. (2018) · Biotechnology Journal · doi:10.1002/biot.201800148 · Cited by 270
Self-citationYu, Y., Zhang, Y., Martin, J. A., & Ozbolat, I. T. (2013) · Journal of Biomechanical Engineering · doi:10.1115/1.4024575 · Cited by 267
A Photo‐Crosslinkable Kidney ECM‐Derived Bioink Accelerates Renal Tissue Formation
Ali, M., PR, A. K., Yoo, J. J., Zahran, F., Atala, A., & Lee, S. J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201800992 · Cited by 264
3D Bioprinted in vitro metastatic models via reconstruction of tumor microenvironments
Meng, F., Meyer, C. M., Joung, D., Vallera, D. A., McAlpine, M. C., & Panoskaltsis‐Mortari, A. (2019) · Advanced Materials · doi:10.1002/adma.201806899 · Cited by 262
GhavamiNejad, A., Park, C. H., & Kim, C. S. (2016) · Biomacromolecules · doi:10.1021/acs.biomac.6b00039 · Cited by 261
Self-citationStanton, M. M., Samitier, J., & Sánchez, S. (2015) · Lab on a Chip · doi:10.1039/c5lc90069g · Cited by 252
3D bioprinting of BM-MSCs-loaded ECM biomimetic hydrogels for in vitro neocartilage formation
Costantini, M., Idaszek, J., Szöke, K., Jaroszewicz, J., Dentini, M., Barbetta, A., Brinchmann, J. E., & Święszkowski, W. (2016) · Biofabrication · doi:10.1088/1758-5090/8/3/035002 · Cited by 250
Nanoengineered Ionic–Covalent Entanglement (NICE) Bioinks for 3D Bioprinting
Chimene, D., Peak, C. W., Gentry, J. L., Carrow, J. K., Cross, L. M., Mondragon, E., Cardoso, G. B., Kaunas, R., & Gaharwar, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b19808 · Cited by 248
Lim, K. S., Klotz, B. J., Lindberg, G. C. J., Melchels, F. P. W., Hooper, G. J., Malda, J., Gawlitta, D., & Woodfield, T. B. F. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900098 · Cited by 247
Advancing Frontiers in Bone Bioprinting
Ashammakhi, N., Hasan, A., Kaarela, O., Byambaa, B., Sheikhi, A., Gaharwar, A. K., & Khademhosseini, A. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801048 · Cited by 244
Self-citationZhai, X., Ma, Y., Hou, C., Gao, F., Zhang, Y., Ruan, C., Pan, H., Lu, W. W., & Liu, W. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00224 · Cited by 243
3D Bioprinting of Self‐Standing Silk‐Based Bioink
Zheng, Z., Wu, J., Liu, M., Wang, H., Li, C., Rodriguez, M. J., Li, G., Wang, X., & Kaplan, D. L. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201701026 · Cited by 241
Schütz, K., Placht, A.-M., Paul, B., Brüggemeier, S., Gelinsky, M., & Lode, A. (2017) · Journal of Tissue Engineering and Regenerative Medicine · doi:10.1002/term.2058 · Cited by 236
UV-Assisted 3D Bioprinting of Nanoreinforced Hybrid Cardiac Patch for Myocardial Tissue Engineering
Izadifar, M., Chapman, D., Babyn, P., Chen, X., & Kelly, M. E. (2018) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2017.0346 · Cited by 236
3D Bioprinting for Vascularized Tissue Fabrication
Richards, D., Jia, J., Yost, M., Markwald, R., & Mei, Y. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1653-z · Cited by 234
3D bioprinting of photocrosslinkable hydrogel constructs
Pereira, R. F., & Bártolo, P. J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42458 · Cited by 232
4D printed thermally activated self-healing and shape memory polycaprolactone-based polymers
Invernizzi, M., Turri, S., Levi, M., & Suriano, R. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.02.023 · Cited by 229
Bioprinting Complex Cartilaginous Structures with Clinically Compliant Biomaterials
Kesti, M., Eberhardt, C., Pagliccia, G., Kenkel, D., Grande, D., Boss, A., & Zenobi‐Wong, M. (2015) · Advanced Functional Materials · doi:10.1002/adfm.201503423 · Cited by 228
Liu, Q., Li, Q., Xu, S., Zheng, Q., & Cao, X. (2018) · Polymers · doi:10.3390/polym10060664 · Cited by 226
Duarte Campos, D. F., Blaeser, A., Weber, M., Jäkel, J., Neuss, S., Jahnen-Dechent, W., & Fischer, H. (2012) · Biofabrication · doi:10.1088/1758-5082/5/1/015003 · Cited by 224
Handheld co-axial bioprinting: application to in situ surgical cartilage repair
Duchi, S., Onofrillo, C., O’Connell, C. D., Blanchard, R., Augustine, C., Quigley, A. F., Kapsa, R. M. I., Pivonka, P., Wallace, G., Di Bella, C., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-05699-x · Cited by 219
Chemical insights into bioinks for 3D printing
Valot, L., Martinez, J., Mehdi, A., & Subra, G. (2019) · Chemical Society Reviews · doi:10.1039/c7cs00718c · Cited by 218
3D printed microchannel networks to direct vascularisation during endochondral bone repair
Daly, A. C., Pitacco, P., Nulty, J., Cunniffe, G. M., & Kelly, D. J. (2018) · Biomaterials · doi:10.1016/j.biomaterials.2018.01.057 · Cited by 217
Park, J. Y., Choi, J.-C., Shim, J.-H., Lee, J.-S., Park, H., Kim, S. W., Doh, J., & Cho, D.-W. (2014) · Biofabrication · doi:10.1088/1758-5082/6/3/035004 · Cited by 213
Visible light crosslinkable chitosan hydrogels for tissue engineering
Hu, J., Hou, Y., Park, H., Choi, B., Hou, S., Chung, A., & Lee, M. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.01.029 · Cited by 212
Zhai, X., Ruan, C., Ma, Y., Cheng, D., Wu, M., Liu, W., Zhao, X., Pan, H., & Lu, W. W. (2018) · Advanced Science · doi:10.1002/advs.201700550 · Cited by 199
Thiol–Ene Alginate Hydrogels as Versatile Bioinks for Bioprinting
Ooi, H. W., Mota, C., ten Cate, A. T., Calore, A., Moroni, L., & Baker, M. B. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00696 · Cited by 198
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis
Stratesteffen, H., Köpf, M., Kreimendahl, F., Blaeser, A., Jockenhoevel, S., & Fischer, H. (2017) · Biofabrication · doi:10.1088/1758-5090/aa857c · Cited by 197
Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique
Schöneberg, J., De Lorenzi, F., Theek, B., Blaeser, A., Rommel, D., Kuehne, A. J. C., Kießling, F., & Fischer, H. (2018) · Scientific Reports · doi:10.1038/s41598-018-28715-0 · Cited by 196
Minimally Invasive and Regenerative Therapeutics
Ashammakhi, N., Ahadian, S., Darabi, M. A., El Tahchi, M., Lee, J., Suthiwanich, K., Sheikhi, A., Dokmeci, M. R., Oklu, R., & Khademhosseini, A. (2019) · Advanced Materials · doi:10.1002/adma.201804041 · Cited by 190
Self-citationAthirasala, A., Tahayeri, A., Thrivikraman, G., França, C. M., Monteiro, N., Tran, V., Ferracane, J., & Bertassoni, L. E. (2018) · Biofabrication · doi:10.1088/1758-5090/aa9b4e · Cited by 189
Inkjet Bioprinting of 3D Silk Fibroin Cellular Constructs Using Sacrificial Alginate
Compaan, A. M., Christensen, K., & Huang, Y. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00432 · Cited by 188
Huang, S., Yao, B., Xie, J., & Fu, X. (2016) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.12.039 · Cited by 187
Zhu, W., Cui, H., Boualam, B., Masood, F., Flynn, E., Rao, R. D., Zhang, Z.-Y., & Zhang, L. G. (2018) · Nanotechnology · doi:10.1088/1361-6528/aaafa1 · Cited by 186
Cui, H., Zhu, W., Nowicki, M., Zhou, X., Khademhosseini, A., & Zhang, L. G. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600505 · Cited by 185
Self-citationKim, Y. B., Lee, H., & Kim, G. H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b11669 · Cited by 179
Gurkan, U. A., El Assal, R., Yildiz, S. E., Sung, Y., Trachtenberg, A. J., Kuo, W. P., & Demirci, U. (2014) · Molecular Pharmaceutics · doi:10.1021/mp400573g · Cited by 178
Nanoengineered Colloidal Inks for 3D Bioprinting
Peak, C. W., Stein, J., Gold, K. A., & Gaharwar, A. K. (2018) · Langmuir · doi:10.1021/acs.langmuir.7b02540 · Cited by 178
Yang, K., Grant, J. C., Lamey, P., Joshi‐Imre, A., Lund, B. R., Smaldone, R. A., & Voit, W. (2017) · Advanced Functional Materials · doi:10.1002/adfm.201700318 · Cited by 176
Ojansivu, M., Rashad, A., Ahlinder, A., Massera, J., Mishra, A., Syverud, K., Finne-Wistrand, A., Miettinen, S., & Mustafa, K. (2019) · Biofabrication · doi:10.1088/1758-5090/ab0692 · Cited by 176
Cold Water Fish Gelatin Methacryloyl Hydrogel for Tissue Engineering Application
Yoon, H. J., Shin, S. R., Cha, J. M., Lee, S.-H., Kim, J.-H., Do, J. T., Song, H., & Bae, H. (2016) · PLOS ONE · doi:10.1371/journal.pone.0163902 · Cited by 175
Injectable shear-thinning nanoengineered hydrogels for stem cell delivery
Thakur, A., Jaiswal, M. K., Peak, C. W., Carrow, J. K., Gentry, J., Dolatshahi-Pirouz, A., & Gaharwar, A. K. (2016) · Nanoscale · doi:10.1039/c6nr02299e · Cited by 173
Cryogenic 3D Printing of Super Soft Hydrogels
Tan, Z., Parisi, C., Silvio, L. D., Dini, D., & Forte, A. E. (2017) · Scientific Reports · doi:10.1038/s41598-017-16668-9 · Cited by 172
Sapir, Y., Kryukov, O., & Cohen, S. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2010.11.008 · Cited by 170
Three-dimensional inkjet biofabrication based on designed images
Arai, K., Iwanaga, S., Toda, H., Genci, C., Nishiyama, Y., & Nakamura, M. (2011) · Biofabrication · doi:10.1088/1758-5082/3/3/034113 · Cited by 167
Ahn, G., Min, K.-H., Kim, C., Lee, J.-S., Kang, D., Won, J.-Y., Cho, D.-W., Kim, J.-Y., Jin, S., Yun, W.-S., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-09201-5 · Cited by 165
Tuning Alginate-Gelatin Bioink Properties by Varying Solvent and Their Impact on Stem Cell Behavior
Li, Z., Huang, S., Liu, Y., Yao, B., Hu, T., Shi, H., Xie, J., & Fu, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-26407-3 · Cited by 164
Ning, L., Sun, H., Lelong, T., Guilloteau, R., Zhu, N., Schreyer, D. J., & Chen, D. (2018) · Biofabrication · doi:10.1088/1758-5090/aacd30 · Cited by 163
Kim, S., Kim, D. Y., Roh, H.-H., Kim, H. S., Lee, J. W., & Lee, K. Y. (2019) · Biomacromolecules · doi:10.1021/acs.biomac.8b01589 · Cited by 162
Granular gel support-enabled extrusion of three-dimensional alginate and cellular structures
Jin, Y., Compaan, A., Bhattacharjee, T., & Huang, Y. (2016) · Biofabrication · doi:10.1088/1758-5090/8/2/025016 · Cited by 161
Dubbin, K., Hori, Y., Lewis, K. K., & Heilshorn, S. C. (2016) · Advanced Healthcare Materials · doi:10.1002/adhm.201600636 · Cited by 160
Jiang, T., Munguia-López, J. G., Flores-Torres, S., Grant, J., Vijayakumar, S., León‐Rodríguez, A. D., & Kinsella, J. M. (2017) · Scientific Reports · doi:10.1038/s41598-017-04691-9 · Cited by 160
Tang, J., Cui, X., Caranasos, T. G., Hensley, M. T., Vandergriff, A. C., Hartanto, Y., Shen, D., Zhang, H., Zhang, J., & Cheng, K. (2017) · ACS Nano · doi:10.1021/acsnano.7b01008 · Cited by 160
Photo-cross-linking: A powerful and versatile strategy to develop shape-memory polymers
Xie, H., Yang, K.-K., & Wang, Y.-Z. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.05.001 · Cited by 159
Rapid Photocrosslinking of Silk Hydrogels with High Cell Density and Enhanced Shape Fidelity
Cui, X., Soliman, B. G., Alcala‐Orozco, C. R., Li, J., Vis, M. A. M., Santos, M., Wise, S. G., Levato, R., Malda, J., Woodfield, T. B. F., et al. (2020) · Advanced Healthcare Materials · doi:10.1002/adhm.201901667 · Cited by 159
Freeform drop-on-demand laser printing of 3D alginate and cellular constructs
Xiong, R., Zhang, Z., Chai, W., Huang, Y., & Chrisey, D. B. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/045011 · Cited by 158
Park, J., Lee, S. J., Chung, S., Lee, J. H., Kim, W. D., Lee, J. Y., & Park, S. A. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.10.069 · Cited by 158
Characterisation of hyaluronic acid methylcellulose hydrogels for 3D bioprinting
Law, N., Doney, B., Glover, H., Qin, Y., Aman, Z. M., Sercombe, T. B., Liew, L. J., Dilley, R. J., & Doyle, B. J. (2018) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2017.09.031 · Cited by 158
Ma, Y., Ji, Y., Zhong, T., Wan, W., Yang, Q., Li, A., Zhang, X., & Lin, M. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00601 · Cited by 158
Madl, C. M., Katz, L. M., & Heilshorn, S. C. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201505329 · Cited by 156
Cui, H., Zhu, W., Holmes, B. B., & Zhang, L. G. (2016) · Advanced Science · doi:10.1002/advs.201600058 · Cited by 155
Stichler, S., Bock, T. A., Paxton, N. C., Bertlein, S., Levato, R., Schill, V., Smolan, W., Malda, J., Teßmar, J., Blunk, T., et al. (2017) · Biofabrication · doi:10.1088/1758-5090/aa8cb7 · Cited by 155
3D bioprinting: an emerging technology full of opportunities and challenges
Zhang, B., Luo, Y., Ma, L., Gao, L., Li, Y., Xue, Q., Yang, H., & Cui, Z. (2018) · Bio-Design and Manufacturing · doi:10.1007/s42242-018-0004-3 · Cited by 154
You, F., Wu, X., & Chen, D. (2016) · International Journal of Polymeric Materials · doi:10.1080/00914037.2016.1201830 · Cited by 153
Self-citationThangavelu, M., Song, J. E., & Khang, G. (2019) · Molecules · doi:10.3390/molecules24244514 · Cited by 150
Tyrosinase-doped bioink for 3D bioprinting of living skin constructs
Shi, Y., Xing, T., Zhang, H., Yin, R., Yang, S., Wei, J., & Zhang, W. (2018) · Biomedical Materials · doi:10.1088/1748-605x/aaa5b6 · Cited by 149
Recent development and biomedical applications of self-healing hydrogels
Wang, Y., Adokoh, C. K., & Narain, R. (2017) · Expert Opinion on Drug Delivery · doi:10.1080/17425247.2017.1360865 · Cited by 147
Zhuang, P., Ng, W. L., An, J., Chua, C. K., & Tan, L. P. (2019) · PLoS ONE · doi:10.1371/journal.pone.0216776 · Cited by 147
Izadifar, Z., Chang, T., Kulyk, W. M., Chen, D., & Eames, B. F. (2015) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2015.0307 · Cited by 145
Fiber Reinforced Cartilage ECM Functionalized Bioinks for Functional Cartilage Tissue Engineering
Rathan, S., Dejob, L., Schipani, R., Haffner, B., Möbius, M. E., & Kelly, D. J. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801501 · Cited by 144
Three-Dimensional-Bioprinted Dopamine-Based Matrix for Promoting Neural Regeneration
Zhou, X., Cui, H., Nowicki, M. A., Miao, S., Lee, S., Masood, F., Harris, B. T., & Zhang, L. G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18197 · Cited by 143
Modified gellan gum hydrogels for tissue engineering applications
Ferris, C. J., Gilmore, K. J., Wallace, G. G., & Panhuis, M. I. H. (2013) · Soft Matter · doi:10.1039/c3sm27389j · Cited by 141
Ma, Y., Ji, Y., Huang, G., Ling, K., Zhang, X., & Xu, F. (2015) · Biofabrication · doi:10.1088/1758-5090/7/4/044105 · Cited by 139
Chondrocytes and stem cells in 3D-bioprinted structures create human cartilage in vivo
Apelgren, P., Amoroso, M., Lindahl, A. H., Brantsing, C., Rotter, N., Gatenholm, P., & Kölby, L. (2017) · PLoS ONE · doi:10.1371/journal.pone.0189428 · Cited by 131
Mazaki, T., Shiozaki, Y., Yamane, K., Yoshida, A., Nakamura, M., Yoshida, Y., Zhou, D., Kitajima, T., Tanaka, M., Ito, Y., et al. (2014) · Scientific Reports · doi:10.1038/srep04457 · Cited by 126
Mechanically Tunable Bioink for 3D Bioprinting of Human Cells
Forget, A., Blaeser, A., Mießmer, F., Köpf, M., Campos, D. F. D., Voelcker, N. H., Blencowe, A., Fischer, H., & Shastri, V. P. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201700255 · Cited by 124
Highly Elastic Biodegradable Single-Network Hydrogel for Cell Printing
Xu, C., Lee, W., Dai, G., & Hong, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b01294 · Cited by 121
Cui, X., Breitenkamp, K., Lotz, M., & DʼLima, D. D. (2012) · Biotechnology and Bioengineering · doi:10.1002/bit.24488 · Cited by 120
3D Printing of Biocompatible Supramolecular Polymers and their Composites
Hart, L. R., Li, S., Sturgess, C., et al. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b10471 · Cited by 120
Na, K., Shin, S., Lee, H., Shin, D., Baek, J., Kwak, H., Park, M., Shin, J., & Hyun, J. (2018) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2017.12.032 · Cited by 117
Chen, Y., Su, W., Yang, S., Gefen, A., & Lin, F. (2012) · Acta Biomaterialia · doi:10.1016/j.actbio.2012.09.039 · Cited by 116
3D bioprinting of GelMA scaffolds triggers mineral deposition by primary human osteoblasts
McBeth, C., Lauer, J. C., Ottersbach, M., Campbell, J., Sharon, A., & Sauer-Budge, A. F. (2016) · Biofabrication · doi:10.1088/1758-5090/aa53bd · Cited by 115
Wang, X., Tolba, E., Schröder, H. C., Neufurth, M., Feng, Q., Diehl‐Seifert, B., & Müller, W. E. G. (2014) · PLoS ONE · doi:10.1371/journal.pone.0112497 · Cited by 114
Ng, W. L., Goh, M. H., Yeong, W. Y., & Naing, M. W. (2018) · Biomaterials Science · doi:10.1039/c7bm01015j · Cited by 114
Recent Strategies in Extrusion-Based Three-Dimensional Cell Printing toward Organ Biofabrication
Gao, G., Kim, B. S., Jang, J., & Cho, D. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b00691 · Cited by 114
Kosik‐Kozioł, A., Costantini, M., Mróz, A., Idaszek, J., Heljak, M. K., Jaroszewicz, J., Kijeńska‐Gawrońska, E., Szöke, K., Frerker, N., Barbetta, A., et al. (2019) · Biofabrication · doi:10.1088/1758-5090/ab15cb · Cited by 114
Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibović, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., et al. (2011) · Tissue Engineering Part C Methods · doi:10.1089/ten.tec.2011.0382 · Cited by 113
3D Bioprinting of Functional Islets of Langerhans in an Alginate/Methylcellulose Hydrogel Blend
Duin, S., Schütz, K., Ahlfeld, T., Lehmann, S., Lode, A., Ludwig, B., & Gelinsky, M. (2019) · Advanced Healthcare Materials · doi:10.1002/adhm.201801631 · Cited by 113
Ahn, S., Lee, H., Bonassar, L. J., & Kim, G. (2012) · Biomacromolecules · doi:10.1021/bm3011352 · Cited by 112
Porous bioprinted constructs in BMP-2 non-viral gene therapy for bone tissue engineering
Loozen, L. D., Wegman, F., Öner, F. C., Dhert, W. J. A., & Alblas, J. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21093f · Cited by 111
Metal-mediated DNA damage and cell death: mechanisms, detection methods, and cellular consequences
Angelé-Martínez, C., Goodman, C., & Brumaghim, J. L. (2014) · Metallomics · doi:10.1039/c4mt00057a · Cited by 111
Fast Setting Silk Fibroin Bioink for Bioprinting of Patient‐Specific Memory‐Shape Implants
Costa, J. B., Silva‐Correia, J., Oliveira, J. M., & Reis, R. L. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201701021 · Cited by 110
3D freeform printing of silk fibroin
Rodríguez, M. J., Dixon, T. A., Cohen, E., Huang, W., Omenetto, F. G., & Kaplan, D. L. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.02.035 · Cited by 110
Sarker, M., Izadifar, M., Schreyer, D., & Chen, X. (2018) · Journal of Biomaterials Science, Polymer Edition · doi:10.1080/09205063.2018.1433420 · Cited by 109
Physical and Chemical Changes Induced in Nucleic Acids by Ultraviolet Light
Smith, K. C. (1966) · Radiation Research Supplement · doi:10.2307/3583551 · Cited by 108
Hydrodynamically Guided Hierarchical Self‐Assembly of Peptide–Protein Bioinks
Hedegaard, C. L., Collin, E. C., Redondo‐Gómez, C., Nguyen, L. T. H., Ng, K. W., Castrejón-Pita, A. A., Castrejón-Pita, J. R., & Mata, Á. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201703716 · Cited by 107
The Role of Calcium Ions in Toxic Cell Injury
Farber, J. L. (1990) · Environmental Health Perspectives · doi:10.1289/ehp.9084107 · Cited by 105
Cited by
Scaffold Fabrication Technologies and Structure/Function Properties in Bone Tissue Engineering
Collins, M. N., Ren, G., Young, K., Pina, S., Reis, R. L., & Oliveira, J. M. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202010609 · Cited by 867
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
Multifunctional GelMA platforms with nanomaterials for advanced tissue therapeutics
Kurian, A. G., Singh, R. K., Patel, K. D., Lee, J.-H., & Kim, H.-W. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.06.027 · Cited by 444
Alavarse, A. C., Frachini, E. C. G., da Silva, R. L. C. G., Lima, V. H., Shavandi, A., & Petri, D. F. S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.01.029 · Cited by 395
Zhang, Y. S., Haghiashtiani, G., Hübscher, T., Kelly, D. J., Lee, J. M., Lutolf, M., McAlpine, M. C., Yeong, W. Y., Zenobi-Wong, M., & Malda, J. (2021) · Nature Reviews Methods Primers · doi:10.1038/s43586-021-00073-8 · Cited by 391
Metadata
- Authors
- GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2020-07-30
- Volume
- 16
- Issue
- 35
- Pages
- e2002931-e2002931
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W3046566005
- Cited by
- 400
- References
- 265
- FWCI
- 13.64
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.