The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
4D Printing of Hygroscopic Liquid Crystal Elastomer Actuators
Abstract
Liquid crystal elastomers (LCEs) are broadly recognized as programmable actuating materials that are responsive to external stimuli, typically heat or light. Yet, soft LCEs that respond to changes in environmental humidity are not reported, except a few examples based on rigid liquid crystal networks with limited processing. Herein, a new class of highly deformable hygroscopic LCE actuators that can be prepared by versatile processing methods, including surface alignment as well as 3D printing is presented. The dimethylamino‐functionalized LCE is prepared by the aza‐Michael addition reaction between a reactive LC monomer and N,N′‐dimethylethylenediamine as a chain extender, followed by photopolymerization. The humidity‐responsive properties are introduced by activating one of the LCE surfaces with an acidic solution, which generates cations on the surface and provides asymmetric hydrophilicity to the LCE. The resulting humidity‐responsive LCE undergoes programmed and reversible hygroscopic actuation, and its shape transformation can be directed by the cut angle with respect to a nematic director or by localizing activation regions in the LCE. Most importantly, various hygroscopic LCE actuators, including (porous) bilayers, a flower, a concentric square array, and a soft gripper, are successfully fabricated by using LC inks in UV‐assisted direct‐ink‐writing‐based 3D printing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Liquid crystalline elastomers as actuators and sensors
Ohm, C., Brehmer, M., & Zentel, R. (2010) · Advanced Materials · doi:10.1002/adma.200904059 · Cited by 1,169
Four-dimensional printing of liquid crystal elastomers
Ambulo, C. P., Burroughs, J. J., Boothby, J. M., Kim, H., Shankar, M. R., & Ware, T. H. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11851 · Cited by 508
4D Printed Actuators with Soft-Robotic Functions
López‐Valdeolivas, M., Liu, D., Broer, D. J., & Sánchez‐Somolinos, C. (2018) · Macromolecular Rapid Communications · doi:10.1002/marc.201700710 · Cited by 371
Dual-responsive, shape-switching bilayers enabled by liquid crystal elastomers
Boothby, J. M., & Ware, T. H. (2017) · Soft Matter · doi:10.1039/c7sm00541e · Cited by 127
Metadata
- Authors
- Kim, K., Guo, Y., Bae, J., Choi, S., Song, H. Y., Park, S., Hyun, K., & Ahn, S.
- Venue
- Small
- Publisher
- Wiley
- Published
- 2021-05-02
- Volume
- 17
- Issue
- 23
- Pages
- e2100910-e2100910
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W3158557756
- Cited by
- 171
- References
- 4
- FWCI
- 11.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D Printing of Hygroscopic Liquid Crystal Elastomer Actuators. https://app.cochat.ai/papers/10.1002/smll.202100910
- The paper
- Kim, K., Guo, Y., Bae, J., Choi, S., Song, H. Y., Park, S., Hyun, K., & Ahn, S. (2021). 4D Printing of Hygroscopic Liquid Crystal Elastomer Actuators. Small. https://doi.org/10.1002/smll.202100910
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.