Interfacial Defects Change the Correlation between Photoluminescence, Ideality Factor, and Open‐Circuit Voltage in Perovskite Solar Cells
The DOI matches its Crossref record; 75 of the 81 references it cites were found in a registry or an index.
Abstract
The ideality factor (nid) and photoluminescence (PL) analyses assess charge recombination characteristics in perovskite solar cells (PeSCs). However, their correlations with open‐circuit voltage (Voc) are often found to be complicated depending on the recombination types in the devices. Herein, the correlation of nid, PL characteristics and Voc is elucidated depending on the interfacial crystal quality in triple‐cation mixed‐halide perovskite, Cs 0.05(MA 0.17 FA 0.83)0.95 Pb(I 0.83 Br 0.17)3, deposited on different hole transport layers (HTLs). In the devices with low quality interfacial crystals, Voc increases together with nid, which originates from the light intensity‐dependence of majority carrier at the interface. Meanwhile, a negative correlation between Voc and nid is observed for devices with high quality interfacial crystals. The authors discuss the cases that PL enhancement by the improvement of overall crystal quality can fail to correlate with a Voc increase if interfacial crystal quality becomes worse. The study highlights that interfacial crystal quality evaluation can help to understand charge recombination via nid and PL measurements, and more importantly provide information of which defect engineering between at the interface and in the bulk would be more effective for device optimization.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Detailed Balance Limit of Efficiency of p-n Junction Solar Cells
Shockley, W., & Queisser, H. J. (1961) · Journal of Applied Physics · doi:10.1063/1.1736034 · Cited by 13,258
Unique Properties of Halide Perovskites as Possible Origins of the Superior Solar Cell Performance
Yin, W., Shi, T., & Yan, Y. (2014) · Advanced Materials · doi:10.1002/adma.201306281 · Cited by 2,334
Bi, C., Wang, Q., Shao, Y., Yuan, Y., Xiao, Z., & Huang, J. (2015) · Nature Communications · doi:10.1038/ncomms8747 · Cited by 1,660
Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss
Jeong, M., Choi, I. W., Go, E. M., Cho, Y., Kim, M., Lee, B., Jeong, S., Jo, Y., Choi, H. W., Lee, J., et al. (2020) · Science · doi:10.1126/science.abb7167 · Cited by 1,517
Sherkar, T. S., Momblona, C., Gil-Escrig, L., Ávila, J., Sessolo, M., Bolink, H. J., & Koster, L. J. A. (2017) · ACS Energy Letters · doi:10.1021/acsenergylett.7b00236 · Cited by 1,280
Zheng, X., Hou, Y., Bao, C., Yin, J., Yuan, F., Huang, Z., Song, K., Liu, J., Troughton, J., Gasparini, N., et al. (2020) · Nature Energy · doi:10.1038/s41560-019-0538-4 · Cited by 1,236
Stolterfoht, M., Wolff, C. M., Márquez, J. A., Zhang, S., Hages, C. J., Rothhardt, D., Albrecht, S., Burn, P. L., Meredith, P., Unold, T., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0219-8 · Cited by 1,007
Stolterfoht, M., Caprioglio, P., Wolff, C. M., Márquez, J. A., Nordmann, J., Zhang, S., Rothhardt, D., Hörmann, U., Amir, Y., Redinger, A., et al. (2019) · Energy & Environmental Science · doi:10.1039/c9ee02020a · Cited by 966
Tress, W., Yavari, M., Domanski, K., Yadav, P., Niesen, B., Correa Baena, J. P., Hagfeldt, A., & Graetzel, M. (2018) · Energy & Environmental Science · doi:10.1039/c7ee02415k · Cited by 843
Cited by
Evaluation of the Passivation Effects of PEDOT:PSS on Inverted Perovskite Solar Cells
Qi, Y., Almtiri, M. N., Giri, H., Jha, S., Ma, G., Shaik, A. K., Zhang, Q., Pradhan, N. R., Gu, X., Hammer, N. I., et al. (2022) · Advanced Energy Materials · doi:10.1002/aenm.202202713 · Cited by 118
Ion–Dipole Interaction Enabling Highly Efficient CsPbI 3 Perovskite Indoor Photovoltaics
Wang, K., Lu, H., Li, M., Chen, C., Zhang, D., Chen, J., Wu, J., Zhou, Y., Wang, X., Su, Z., et al. (2023) · Advanced Materials · doi:10.1002/adma.202210106 · Cited by 93
Wang, J., Yuan, L., Luo, H., Duan, C., Zhou, B., Wen, Q., & Yan, K. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.136968 · Cited by 67
Liu, T., Zhao, X., Zhong, X., Burlingame, Q. C., Kahn, A., & Loo, Y. (2022) · ACS Energy Letters · doi:10.1021/acsenergylett.2c01610 · Cited by 60
Zhu, Q., Chen, Y., Zhu, X., Sun, Y., Cheng, Z., Xu, J., & Xu, M. (2023) · Science China Materials · doi:10.1007/s40843-022-2402-3 · Cited by 41
Zhou, J., Lyu, M., Zhu, J., Li, G., Li, Y., Jin, S., Song, J., Niu, H., Xu, J., & Zhou, R. (2022) · ACS Applied Energy Materials · doi:10.1021/acsaem.1c03681 · Cited by 33
Zeng, F., Xu, L. H., Hu, C., Xing, J., Wu, Y., Bai, X., Dong, B., & Song, H. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202415547 · Cited by 29
How organic chemistry can affect perovskite photovoltaics
Scalon, L., Vaynzof, Y., Nogueira, A. F., & Oliveira, C. C. (2023) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2023.101358 · Cited by 25
Ding, Y., Lu, S., Chang, J., Feng, E., Li, H., Long, C., Yang, Y., Yi, C., Zheng, Z., Ding, L., et al. (2024) · Small · doi:10.1002/smll.202410601 · Cited by 23
Additive MXene and dominant recombination channel in perovskite solar cells
Asgharizadeh, S., & Azadi, S. K. (2022) · Solar Energy · doi:10.1016/j.solener.2022.07.001 · Cited by 22
Xu, W., Tang, X., Xiong, J., Xu, W., Zhou, H., Yu, C., Lou, Y., & Feng, L. (2024) · Small · doi:10.1002/smll.202312230 · Cited by 19
Dual‐Source Defect Managing of Tin–Lead Perovskite for Efficient All‐Perovskite Tandem Solar Cells
Zhang, J., Wang, J., Zhou, Q., Zhu, H., Pan, Y., Shi, C., Liu, S., Zhou, Z. Q., Sun, H., Cai, Y., et al. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202415797 · Cited by 19
BCP Buffer Layer Enables Efficient and Stable Dopant-Free P3HT Perovskite Solar Cells
Li, W., Wang, G., Long, Y., Li, X., Zhong, Z., Li, X., Xu, H., Yan, H., & Song, Q. (2024) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.4c15050 · Cited by 16
Electro-Optical Analysis of Carrier Dynamics in Lead-Free Cs 3 Bi 2 I 9 Perovskite
Tailor, N. K., Afroz, M. A., Choudhary, S., Saini, S. K., Maurya, N. C., Adarsh, K. V., Singh, R. K., & Satapathi, S. (2025) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5c01310 · Cited by 12
Kim, J., Yun, A. J., Park, B., & Kim, J. (2022) · EcoMat · doi:10.1002/eom2.12314 · Cited by 11
Chen, P., Chen, M., Huang, J., Li, G., Zhang, H., Zhang, C., Liu, Y., & Cao, D. (2024) · Applied Physics Letters · doi:10.1063/5.0221884 · Cited by 10
Polymer–Perovskite Microcrystal Heterojunction for Self-Powered Optical Sensing and Communication
Sathyanarayana, S., & Das, B. C. (2026) · Advanced Materials · doi:10.1002/adma.202517950 · Cited by 7
Multifunctional Ruthenium Dye Assists PTAA-Based Inverted Perovskite Solar Cells
Hao, K., Jiang, J. C., Wang, X., Liu, Z., Liu, X., Zhou, M., & Wang, X.-F. (2025) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5c01089 · Cited by 7
Sadhu, A., Salim, T., Sun, Q., Lie, S., Julianto, E., & Wong, L. H. (2024) · Advanced Energy Materials · doi:10.1002/aenm.202403676 · Cited by 7
Shu, Q., Xiong, J., Zhu, B., Xu, W., Xu, W., You, K., Chen, G., Lou, Y., & Feng, L. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.143273 · Cited by 7
Li, B., Yang, J., Liao, Q., Ji, X., Wang, Y., Yang, J., Liu, B., Liang, Q., Wang, Z., Li, H., et al. (2023) · Solar RRL · doi:10.1002/solr.202300740 · Cited by 7
Stabilizing perovskite solar cells at 85 °C via additive engineering and MXene interlayers
Baumann, F. A. K., Padilla‐Pantoja, J., Caicedo, J. M., Karimipour, M., Vahedigharehchopogh, N., Santiso, J., Ballesteros, B., Gamboa, R. A. M., Tian, Z., Raga, S. R., et al. (2025) · EES solar. · doi:10.1039/d5el00104h · Cited by 6
Perovskite films passivated by poly[(R)-3-hydroxybutyric acid] for improved photovoltaic performance
Qi, Y., Qu, J., Moore, J., Gollinger, K., Shrestha, N., Zhao, Y., Pradhan, N. R., Tang, J., & Dai, Q. (2022) · Organic Electronics · doi:10.1016/j.orgel.2022.106487 · Cited by 5
Interfacial toughening for high-efficiency perovskite solar modules
Li, T., Huang, Y., Ding, B., Jiang, B., Zhang, S., Wang, Z., Zhang, S., Tang, J., Nazeeruddin, M. K., & Wang, H. (2024) · Materials Today Energy · doi:10.1016/j.mtener.2024.101611 · Cited by 5
Barua, P., In, C. M., Lee, M. J., & Hwang, I. (2023) · Nanoscale · doi:10.1039/d2nr07090a · Cited by 5
Self-citationMultifunctional organic salts synergize interfacial passivation for efficient PSCs
Wang, X., Zhou, J., Zhang, C., Zheng, C., Zhang, Q., Liu, B., Jia, Z., Xue, T., Guo, K., Huang, J., et al. (2024) · Materials Today Communications · doi:10.1016/j.mtcomm.2024.109724 · Cited by 4
Jia, J., Shi, B., Dong, J., Jiang, Z., Guo, S., Wu, J., & Cao, B. (2023) · New Journal of Chemistry · doi:10.1039/d3nj01146a · Cited by 4
Pan, J., Fan, Y., Li, D., Wang, Y., Song, Q., Chen, Y., & Huang, W. (2026) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5c08380 · Cited by 2
Hong, J., Kim, C., In, C. M., Kim, S., Cho, W.-J., Pecunia, V., Lee, M. J., & Hwang, I. (2021) · Solar RRL · doi:10.1002/solr.202100992 · Cited by 2
Self-citationFarinós‐Navajas, N., Mínguez-Avellán, M., Betancur, P. F., Akın, S., Ans, M., Martínez‐Pastor, J. P., Turren‐Cruz, S., Rodríguez-Cantó, P. J., Boix, P. P., Ripollés, T. S., et al. (2026) · Small Structures · doi:10.1002/sstr.202600020 · Cited by 1
Choudhary, S., Tailor, N. K., Saini, S. K., Maurya, N. C., Adarsh, K. V., Singh, R. K., & Satapathi, S. (2026) · ACS Applied Electronic Materials · doi:10.1021/acsaelm.6c00654 · Cited by 1
Hu, Y., Hong, J., Cho, K., Yoo, W., Ko, D., & Hwang, I. (2025) · Energy & environment materials · doi:10.1002/eem2.70120
Self-citationXu, H., Wang, G., Long, Y., Xiao, L., Li, W., Jiang, Z., Luo, F., & Wang, C. H. (2026) · Surfaces and Interfaces · doi:10.1016/j.surfin.2026.109608
Wang, H., Zhang, P., Wang, J., Bi, W., Yang, P.-C., Shen, X., Li, M., Lv, J., & Zhong, Y. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.177952
Barletta, G., Ternes, S., Ali, S., Abbas, Z., Ostendi, C., D'Addio, M., Magliano, E., Asinari, P., Chiavazzo, E., & Carlo, A. D. (2026) · Solar RRL · doi:10.1002/solr.70433
A robust series-connected diode model tailored for perovskite solar cells
Halal, A., & Plesz, B. (2026) · Energy Reports · doi:10.1016/j.egyr.2026.109583
Chen, X., Cheng, W., Li, Q., Lin, Z., Xin, Y., Xu, J., Mijiti, A., Zheng, L., Wu, X., Liu, Y., et al. (2026) · Journal of Materials Chemistry A · doi:10.1039/d6ta05903a
Metadata
- Authors
- Kim, S., Jang, J. H., Wu, Z., Lee, M. J., Woo, H. Y., & Hwang, I.
- Affiliations
- Kwangwoon University (KR)
- Kookmin University (KR)
- Korea University (KR)
- Corresponding author
- Woo, Han Young
- Hwang, Inchan
- Venue
- Small
- Publisher
- Wiley
- Published
- 2021-07-06
- Volume
- 17
- Issue
- 33
- Pages
- e2101839-e2101839
- ISSN
- 1613-6810 (ISSN-L)
- 1613-6829
- OpenAlex
- W3182625264
- Semantic Scholar
- 85af014cafeb98fa40bf01fa56b8b209526c796b
- Cited by
- 36
- References
- 81
- Citations by year
- 2026: 7 · 2025: 5 · 2024: 9 · 2023: 7 · 2022: 7 · 2021: 1
- FWCI
- 1.76
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Small (publishedVersion)
- PubMed (publishedVersion)
- Funders
- National Research Foundation of Korea (2020R1A2C1008607, 2019R1A6A1A11044070)
- Korea Institute for Advancement of Technology (P0002397)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Perovskite Materials and Applications
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Organic Electronics and Photovoltaics
- Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
- Keywords
- perovskite solar cells, ideality factor, photoluminescence, open-circuit voltage, interface defects, charge recombination, hole transport layer, mixed-halide perovskites, defect engineering
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.