The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
All‐Inorganic Halide Perovskites for Optoelectronics: Progress and Prospects
Abstract
During the past 8 years, solution‐processed organic–inorganic metal halide (OMH) perovskites have become some of the most notable materials because they can exhibit high solar cell efficiency, exceeding 20%. However, due to the volatile and hygroscopic nature of the organic cations, OMH perovskites suffer from chemical instability, especially at high temperatures. Therefore, all‐inorganic metal halide (IMH) perovskites (CsBX 3, B = Pb, Sn, Ge; X = Cl, Br, I) are rapidly emerging as promising alternatives because of their superior stabilities and comparable properties, such as strong emission, high fluorescence quantum yield and tunable bandgap covering entire visible spectrum. Highlighted by these advantages, IMH perovskites have attracted enormous attention, indicating a promising future. In this review, the recent progress on the syntheses of IMH perovskites is outlined. In addition, the research development of IMH perovskites in optoelectronic devices, such as perovskite solar cells, photodetectors, and light‐emitting diodes, is introduced. Finally, the challenges facing the field of IMH perovskites are discussed and some possible solutions based on the available literature are suggested.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Impact of microstructure on local carrier lifetime in perovskite solar cells
de Quilettes, D. W., Vorpahl, S. M., Stranks, S. D., Nagaoka, H., Eperon, G. E., Ziffer, M. E., Snaith, H. J., & Ginger, D. S. (2015) · Science · doi:10.1126/science.aaa5333 · Cited by 2,198
Akkerman, Q. A., D’Innocenzo, V., Accornero, S., Scarpellini, A., Petrozza, A., Prato, M., & Manna, L. (2015) · Journal of the American Chemical Society · doi:10.1021/jacs.5b05602 · Cited by 2,197
Cited by
Dual Interfacial Design for Efficient CsPbI2Br Perovskite Solar Cells with Improved Photostability
Tian, J., Xue, Q., Tang, X., Chen, Y., Li, N., Hu, Z., Shi, T., Wang, X., Huang, F., Brabec, C. J., et al. (2019) · Advanced Materials · doi:10.1002/adma.201901152 · Cited by 398
Graded Bandgap CsPbI2+Br1− Perovskite Solar Cells with a Stabilized Efficiency of 14.4%
Bian, H., Bai, D., Jin, Z., Wang, K., Liang, L., Wang, H., Zhang, J., Wang, Q., & Liu, S. (. (2018) · Joule · doi:10.1016/j.joule.2018.04.012 · Cited by 366
Self-citationLi, F., Liu, Y., Wang, H., Zhan, Q., Liu, Q., & Xia, Z. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b03442 · Cited by 339
Myths and reality of HPbI3 in halide perovskite solar cells
Ke, W., Spanopoulos, I., Stoumpos, C. C., & Kanatzidis, M. G. (2018) · Nature Communications · doi:10.1038/s41467-018-07204-y · Cited by 304
Recent Advances in Perovskite Photodetectors for Image Sensing
Li, L., Ye, S., Qu, J., Zhou, F., Song, J., & Shen, G. (2021) · Small · doi:10.1002/smll.202005606 · Cited by 235
Metadata
- Authors
- Liang, J., Liu, J., & Jin, Z.
- Venue
- Solar RRL
- Publisher
- Wiley
- Published
- 2017-08-31
- Volume
- 1
- Issue
- 10
- ISSN
- 2367-198X (ISSN-L)
- OpenAlex
- W2752781389
- Cited by
- 244
- References
- 3
- FWCI
- 12.64
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: All‐Inorganic Halide Perovskites for Optoelectronics: Progress and Prospects. https://app.cochat.ai/papers/10.1002/solr.201700086
- The paper
- Liang, J., Liu, J., & Jin, Z. (2017). All‐Inorganic Halide Perovskites for Optoelectronics: Progress and Prospects. Solar RRL. https://doi.org/10.1002/solr.201700086
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.