The DOI matches its Crossref record; 51 of the 51 references it cites were found in a registry or an index.
NH4Cl‐Modified ZnO for High‐Performance CsPbIBr2 Perovskite Solar Cells via Low‐Temperature Process
Abstract
Recently, the thermally stable and facilely fabricated inorganic CsPbIBr 2 perovskite solar cells (PSCs) have attracted tremendous attention where the electron transport layer (ETL) is vital. However, the typical sintering temperature for the widely used electron transport material, that is, TiO 2, is more than 400 °C, elevating the cost and hindering the application. Due to high electron mobility and low fabrication temperature, ZnO becomes a desirable alternative for TiO 2, as the ETL in CsPbIBr 2 PSCs, albeit with low open‐circuit voltage (Voc). Herein, this work introduces a trace of NH 4 Cl to the sol–gel‐derived ZnO precursor to decrease the work function of the ZnO film, tune the surface morphology of the perovskite film, and thus suppress the density of trap states in the CsPbIBr 2 films. Consequently, full‐coverage and pure‐phase CsPbIBr 2 films consisting of micron‐size and high‐crystallinity grains are obtained. More importantly, for the optimal NH 4 Cl‐modified ZnO, a shining improvement in Voc from 1.08 to 1.27 V boosts the champion CsPbIBr 2 PSCs to obtain a power conversion efficiency of 10.16%, which is the highest value reported among pure‐CsPbIBr 2 PSCs under a low fabrication temperature of 160 °C. In addition, the NH 4 Cl‐modified ZnO ETL reduces the severe hysteresis and increases the device stability significantly.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Stranks, S. D., Eperon, G. E., Grancini, G., Menelaou, C., Alcocer, M. J. P., Leijtens, T., Herz, L. M., Petrozza, A., & Snaith, H. J. (2013) · Science · doi:10.1126/science.1243982 · Cited by 10,413
Interface engineering of highly efficient perovskite solar cells
Zhou, H., Chen, Q., Li, G., Luo, S., Song, T.-B., Duan, H.-S., Hong, Z., You, J., Liu, Y., & Yang, Y. (2014) · Science · doi:10.1126/science.1254050 · Cited by 6,632
Compositional engineering of perovskite materials for high-performance solar cells
Jeon, N. J., Noh, J. H., Yang, W. S., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Nature · doi:10.1038/nature14133 · Cited by 6,431
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Yang, W. S., Noh, J. H., Jeon, N. J., Kim, Y. C., Ryu, S., Seo, J., & Seok, S. I. (2015) · Science · doi:10.1126/science.aaa9272 · Cited by 6,251
Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals
Shi, D., Adinolfi, V., Comin, R., Yuan, M., Alarousu, E., Buin, A., Chen, Y., Hoogland, S., Rothenberger, A., Katsiev, K., et al. (2015) · Science · doi:10.1126/science.aaa2725 · Cited by 5,139
Eperon, G. E., Stranks, S. D., Menelaou, C., Johnston, M. B., Herz, L. M., & Snaith, H. J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43822h · Cited by 4,140
High Charge Carrier Mobilities and Lifetimes in Organolead Trihalide Perovskites
Wehrenfennig, C., Eperon, G. E., Johnston, M. B., Snaith, H. J., & Herz, L. M. (2014) · Advanced Materials · doi:10.1002/adma.201305172 · Cited by 3,239
Liu, D., & Kelly, T. L. (2014) · Nature Photonics · doi:10.1038/nphoton.2013.342 · Cited by 2,663
Zheng, X., Chen, B., Dai, J., Fang, Y., Bai, Y., Lin, Y., Wei, H., Zeng, X. C., & Huang, J. (2017) · Nature Energy · doi:10.1038/nenergy.2017.102 · Cited by 2,154
Inorganic caesium lead iodide perovskite solar cells
Eperon, G. E., Paternò, G. M., Sutton, R. J., Zampetti, A., Haghighirad, A. A., Cacialli, F., & Snaith, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta06398a · Cited by 1,852
Sun, Y., Seo, J. H., Takacs, C. J., Seifter, J., & Heeger, A. J. (2011) · Advanced Materials · doi:10.1002/adma.201004301 · Cited by 1,545
Liang, P., Liao, C., Chueh, C., Zuo, F., Williams, S. T., Xin, X., Lin, J., & Jen, A. K. ‐. (2014) · Advanced Materials · doi:10.1002/adma.201400231 · Cited by 1,452
Yang, D., Yang, R., Wang, K., Wu, C., Zhu, X., Feng, J., Ren, X., Fang, G., Priya, S., & Liu, S. (2018) · Nature Communications · doi:10.1038/s41467-018-05760-x · Cited by 1,401
Weyl Semimetals as Hydrogen Evolution Catalysts
Rajamathi, C. R., Gupta, U., Kumar, N., Yang, H., Sun, Y., Süß, V., Shekhar, C., Schmidt, M., Blumtritt, H., Werner, P., et al. (2017) · Advanced Materials · doi:10.1002/adma.201606202 · Cited by 1,358
Lead‐Free Halide Perovskite Solar Cells with High Photocurrents Realized Through Vacancy Modulation
Kumar, M. H., Dharani, S., Leong, W. L., Boix, P. P., Prabhakar, R. R., Baikie, T., Shi, C., Ding, H., Ramesh, R., Asta, M., et al. (2014) · Advanced Materials · doi:10.1002/adma.201401991 · Cited by 1,209
Cesium Lead Halide Perovskites with Improved Stability for Tandem Solar Cells
Beal, R. E., Slotcavage, D. J., Leijtens, T., Bowring, A. R., Belisle, R. A., Nguyen, W. H., Burkhard, G. F., Hoke, E. T., & McGehee, M. D. (2016) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.6b00002 · Cited by 1,136
Kulbak, M., Cahen, D., & Hodes, G. (2015) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.5b00968 · Cited by 1,103
Pandey, R., Vats, G., Yun, J., Bowen, C. R., Ho‐Baillie, A. W. Y., Seidel, J., Butler, K. T., & Seok, S. I. (2019) · Advanced Materials · doi:10.1002/adma.201807376 · Cited by 1,069
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Yang, D., Zhou, X., Yang, R., Yang, Z., Yu, W., Wang, X., Li, C., Liu, S. (., & Chang, R. P. H. (2016) · Energy & Environmental Science · doi:10.1039/c6ee02139e · Cited by 1,057
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Thermochromic halide perovskite solar cells
Lin, J., Lai, M., Dou, L., Kley, C. S., Chen, H., Peng, F., Sun, J., Lu, D., Hawks, S. A., Xie, C., et al. (2018) · Nature Materials · doi:10.1038/s41563-017-0006-0 · Cited by 853
Hybrid organic–inorganic inks flatten the energy landscape in colloidal quantum dot solids
Liu, M., Voznyy, O., Sabatini, R., García de Arquer, F. P., Munir, R., Balawi, A. H., Lan, X., Fan, F., Walters, G., Kirmani, A. R., et al. (2017) · Nature Materials · doi:10.1038/nmat4800 · Cited by 773
Oxygen Vacancies in ZnO Nanosheets Enhance CO2 Electrochemical Reduction to CO
Geng, Z., Kong, X., Chen, W., Su, H., Liu, Y., Cai, F., Wang, G., & Zeng, J. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201711255 · Cited by 771
Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells
Shao, Y., Yuan, Y., & Huang, J. (2016) · Nature Energy · doi:10.1038/nenergy.2015.1 · Cited by 757
Bifunctional Stabilization of All-Inorganic α-CsPbI3 Perovskite for 17% Efficiency Photovoltaics
Wang, Y., Zhang, T., Kan, M., & Zhao, Y. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b07927 · Cited by 690
Zhou, X., Li, X., Ye, Y., Zhao, K., Zhuang, Y., Li, Y., Wei, Y., & Wu, M. (2015) · Nature Communications · doi:10.1038/ncomms9679 · Cited by 628
Liang, J., Zhao, P., Wang, C., Wang, Y., Hu, Y., Zhu, G., Ma, L., Liu, J., & Jin, Z. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b07949 · Cited by 529
Charging up Stationary Energy Storage
Sutherland, B. R. (2019) · Joule · doi:10.1016/j.joule.2018.12.022 · Cited by 517
High‐Purity Inorganic Perovskite Films for Solar Cells with 9.72 % Efficiency
Duan, J., Zhao, Y., He, B., & Tang, Q. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800019 · Cited by 514
Device stability of perovskite solar cells – A review
Asghar, M. I., Zhang, J., Wang, H., & Lund, P. D. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.003 · Cited by 423
Self-citationMulti-level engineering facilitates the production of phenylpropanoid compounds in tomato
Zhang, Y., Butelli, E., Alseekh, S., Tohge, T., Rallapalli, G., Luo, J., Kawar, P. G., Hill, L., Santino, A., Fernie, A. R., et al. (2015) · Nature Communications · doi:10.1038/ncomms9635 · Cited by 365
Open-Circuit Voltages Exceeding 1.26 V in Planar Methylammonium Lead Iodide Perovskite Solar Cells
Liu, Z., Krückemeier, L., Krogmeier, B., Klingebiel, B., Márquez, J. A., Levcenko, S., Öz, S., Mathur, S., Rau, U., Unold, T., et al. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b01906 · Cited by 365
Schottky solar cells based on CsSnI3 thin-films
Chen, Z., Wang, J. J., Ren, Y., et al. (2012) · Applied Physics Letters · doi:10.1063/1.4748888 · Cited by 303
Cha, M., Da, P., Wang, J., Wang, W., Chen, Z., Xiu, F., Zheng, G., & Wang, Z.-S. (2016) · Journal of the American Chemical Society · doi:10.1021/jacs.6b04519 · Cited by 282
Hole‐Transporting Materials in Inverted Planar Perovskite Solar Cells
Yan, W., Ye, S., Li, Y., Sun, W., Rao, H., Liu, Z., Bian, Z., & Huang, C. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201600474 · Cited by 277
CsPbIBr2 Perovskite Solar Cell by Spray-Assisted Deposition
Lau, C. F. J., Deng, X., Ma, Q., Zheng, J., Yun, J. S., Green, M. A., Huang, S., & Ho-Baillie, A. W. Y. (2016) · ACS Energy Letters · doi:10.1021/acsenergylett.6b00341 · Cited by 255
Mahmood, K., Swain, B. S., & Amassian, A. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500568 · Cited by 252
Yang, B., Wang, M., Hu, X., Zhou, T., & Zang, Z. (2019) · Nano Energy · doi:10.1016/j.nanoen.2018.12.097 · Cited by 249
Self-citationInorganic CsPb1−xSnxIBr2 for Efficient Wide‐Bandgap Perovskite Solar Cells
Li, N., Zhu, Z., Li, J., Jen, A. K. ‐., & Wang, L. (2018) · Advanced Energy Materials · doi:10.1002/aenm.201800525 · Cited by 245
Liu, C., Li, W., Chen, J., Fan, J., Mai, Y., & Schropp, R. E. I. (2017) · Nano Energy · doi:10.1016/j.nanoen.2017.08.048 · Cited by 213
Ding, C., Zhang, Y., Liu, F., Kitabatake, Y., Hayase, S., Toyoda, T., Yoshino, K., Minemoto, T., Katayama, K., & Shen, Q. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.08.031 · Cited by 209
Bai, S., Jin, Y., Liang, X., Ye, Z., Wu, Z., Sun, B., Ma, Z., Tang, Z., Wang, J., Würfel, U., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401606 · Cited by 180
Hu, L., Sun, K., Wang, M., Chen, W., Yang, B., Fu, J., Xiong, Z., Li, X., Tang, X., Zang, Z., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b14592 · Cited by 174
Self-citationChiang, C., & Wu, C. (2018) · ACS Nano · doi:10.1021/acsnano.8b05731 · Cited by 139
Zhu, W., Zhang, Z., Chai, W., Zhang, Q., Chen, D., Lin, Z., Chang, J., Zhang, J., Zhang, C., & Hao, Y. (2019) · ChemSusChem · doi:10.1002/cssc.201900611 · Cited by 135
Stability of inverted organic solar cells with ZnO contact layers deposited from precursor solutions
MacLeod, B. A., de Villers, B. J. T., Schulz, P., Ndione, P. F., Kim, H., Giordano, A. J., Zhu, K., Marder, S. R., Graham, S. L., Berry, J. J., et al. (2014) · Energy & Environmental Science · doi:10.1039/c4ee02488e · Cited by 122
Park, S., Heo, J. H., Cheon, C. H., Kim, H., Im, S. H., & Son, H. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta08417b · Cited by 111
Zhang, Q., Zhu, W., Chen, D., Zhang, Z., Lin, Z., Chang, J., Zhang, J., Zhang, C., & Hao, Y. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b17839 · Cited by 111
TiO2/RbPbI3 halide perovskite solar cells
Jung, M., Rhim, S. H., & Moon, D. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.07.011 · Cited by 79
Mahmud, M. A., Elumalai, N. K., Upama, M. B., Wang, D., Wright, M., Sun, T. R., Xu, C., Haque, F., & Uddin, A. (2016) · RSC Advances · doi:10.1039/c6ra14186b · Cited by 40
Metadata
- Authors
- Wang, H., Cao, S., Yang, B., Li, H., Wang, M., Hu, X., Sun, K., & Zang, Z.
- Venue
- Solar RRL
- Publisher
- Wiley
- Published
- 2019-10-22
- Volume
- 4
- Issue
- 1
- ISSN
- 2367-198X (ISSN-L)
- OpenAlex
- W2980389500
- Cited by
- 260
- References
- 51
- FWCI
- 16.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.