The DOI matches its Crossref record; 18 of the 18 references it cites were found in a registry or an index.
Effect of Plasticizers on Mechanical and Barrier Properties of Rice Starch Film
Open accessAbstract
The effect of plasticizers, glycerol, sorbitol and poly(ethylene glycol) 400 (PEG 400), on mechanical and barrier properties of rice starch film has been investigated. Sorbitol‐ and glycerol‐plasticized starch films appeared homogeneous, clear, smooth, and contained less insoluble particles compared to unplasticized rice starch films. PEG 400 did not form plasticized films of suitable characteristics. The softness and stickiness of films improved with increasing concentrations of glycerol and sorbitol. In general, films plasticized with glycerol and sorbitol displayed a better solubility in water than unplasticized films, i.e. 35% (w/w) glycerol and 45% w/w (sorbitol) (optimum solubility). The tensile strength of films decreased especially in the high concentration regime of plasticizers, between 20–45% (w/w) of plasticizer/rice starch film. Through the entire concentration regime, the tensile strength of glycerol‐plasticized films was significantly lower than that of sorbitol‐plasticized films, but their elongation was larger. The water vapor transmission rate (WVTR) through plasticized films and the oxygen transmission rate (OTR) increased with glycerol and sorbitol concentrations, however, glycerol was revealed to be significantly more effective in reducing the tensile strength as well as increasing the WVTR and the OTR compared to sorbitol. With the higher tensile strength and the smaller OTR and WVTR, the 30% sorbitol‐plasticized film reveals an improved coating performance in terms of a reduction of coating failures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Edible and biodegradable polymer films: challenges and opportunities
Krochta, J. M., & Mulder-Johnston, C. D. (1997) · Food technology · Cited by 1,080
EDIBLE FILMS AND COATINGS: A REVIEW
Kester, J. J., & Fennema, O. R. (1986) · Food technology · Cited by 1,029
McHUGH, T. H., AVENA‐BUSTILLOS, R., & KROCHTA, J. M. (1993) · Journal of Food Science · doi:10.1111/j.1365-2621.1993.tb09387.x · Cited by 903
Edible Coatings and Films to Improve Food Quality
Park, H. (1995) · Trends in Food Science & Technology · doi:10.1016/s0924-2244(00)88935-9 · Cited by 880
McHugh, T. H., & Krochta, J. M. (1994) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf00040a001 · Cited by 688
Film Coating Theory and Practice
Banker, G. S. (1966) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.2600550118 · Cited by 403
Aspects of the Physical Chemistry of Starch
Parker, R., & Ring, S. G. (2001) · Journal of Cereal Science · doi:10.1006/jcrs.2000.0402 · Cited by 398
Plasticized Whey Protein Edible Films: Water Vapor Permeability Properties
McHUGH, T. H., AUJARD, J. ‐., & KROCHTA, J. M. (1994) · Journal of Food Science · doi:10.1111/j.1365-2621.1994.tb06980.x · Cited by 396
Microstructural characterization of yam starch films
Mali, S., Grossmann, M. V. E., Garcia, M. A., Martino, M. N., & Zaritzky, N. E. (2002) · Carbohydrate Polymers · doi:10.1016/s0144-8617(02)00058-9 · Cited by 375
Permeability and Mechanical Properties of Cellulose‐Based Edible Films
PARK, H. J., WELLER, C. L., VERGANO, P. J., & TESTIN, R. F. (1993) · Journal of Food Science · doi:10.1111/j.1365-2621.1993.tb06183.x · Cited by 277
Donhowe, I. G., & Fennema, O. R. (1993) · Journal of Food Processing and Preservation · doi:10.1111/j.1745-4549.1993.tb00729.x · Cited by 275
Microstructural Characterization of Plasticized Starch-Based Films
García, M. A., Martino, M. N., & Zaritzky, N. (2000) · Starch - Stärke · doi:10.1002/1521-379x(200006)52:4<118::aid-star118>3.0.co;2-0 · Cited by 249
Gas permeation of collagen films as affected by cross‐linkage, moisture, and plasticizer content
Lieberman, E. R., & GILBERT, S. G. (1973) · Journal of Polymer Science Polymer Symposia · doi:10.1002/polc.5070410106 · Cited by 158
(1980) · Food and Cosmetics Toxicology · doi:10.1016/0015-6264(80)90170-4 · Cited by 109
Sakellariou, P., Rowe, R. C., & White, E. F. T. (1986) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(86)90212-7 · Cited by 76
Aroma compound and water vapor permeability of edible films and polymeric packagings.
Debeaufort, F., & Voilley, A. J. (1994) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf00048a041 · Cited by 69
Thermomechanical properties of glassy cereal foods
Meste, M. L., Roudaut, G., & Davidou, S. (1996) · Journal of thermal analysis · doi:10.1007/bf01992833 · Cited by 61
Cited by
Progress in bio-based plastics and plasticizing modifications
Mekonnen, T., Mussone, P., Khalil, H., & Bressler, D. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta12555f · Cited by 831
Thin films as an emerging platform for drug delivery
Karki, S., Kim, H., Na, S.-J., Shin, D., Jo, K., & Lee, J. (2016) · Asian Journal of Pharmaceutical Sciences · doi:10.1016/j.ajps.2016.05.004 · Cited by 543
Sanyang, M., Sapuan, S., Jawaid, M., Ishak, M., & Sahari, J. (2015) · Polymers · doi:10.3390/polym7061106 · Cited by 509
Effects of various plasticizers on mechanical and water vapor barrier properties of gelatin films
Cao, N., Yang, X., & Fu, Y. (2009) · Food Hydrocolloids · doi:10.1016/j.foodhyd.2008.07.017 · Cited by 367
Scaling up difficulties and commercial aspects of edible films for food packaging: A review
Jeya Jeevahan, J., Chandrasekaran, M., Venkatesan, S. P., Sriram, V., Britto Joseph, G., Mageshwaran, G., & Durairaj, R. B. (2020) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2020.04.014 · Cited by 334
Metadata
- Authors
- Laohakunjit, N., & Noomhorm, A.
- Venue
- Starch - Stärke
- Publisher
- Wiley
- Published
- 2004-08
- Volume
- 56
- Issue
- 8
- Pages
- 348-356
- ISSN
- 0038-9056 (ISSN-L)
- 1521-379X
- OpenAlex
- W1988271816
- Cited by
- 359
- References
- 18
- FWCI
- 2.17
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.