CoChat

Modeling and harnessing sparse and low-rank data structure: a new paradigm for structural dynamics, identification, damage detection, and health monitoring: Sparse and Low-Rank Data Structure: A New Paradigm in SHM

Open access
Nagarajaiah, Satish, Yang, Yongchao · 2017 · Structural Control and Health Monitoring
Cited by 121

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

This paper presents a new paradigm of explicitly modeling and harnessing the data structure to address the inverse problems in structural dynamics, identification, and data-driven health monitoring. In particular, it is shown that the structural dynamic features and damage information, intrinsic within the structural vibration response measurement data, possesses sparse and low-rank structure, which can be effectively modeled and processed by emerging mathematical tools such as sparse representation and compressed sensing, low-rank matrix decomposition and completion, as well as the unsupervised multivariate blind source separation. It is also discussed that explicitly modeling and harnessing the sparse and low-rank data structure could benefit future work in developing data-driven approaches toward rapid, unsupervised, and effective system identification, damage detection, as well as massive SHM data sensing and management. Copyright © 2016 John Wiley & Sons, Ltd.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1002/stc.1851

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 5 references

Research works printed but not linked: 64

  1. Ewin, 2000, Modal Testing: Theory, Practice and Application
  2. Ibrahim, 1973, A time domain modal vibration test technique, Shock and Vibration Bulletin, 43, 21
  3. Juang, 1985, An eigensystem realization algorithm for modal parameter identification and model reduction, Journal of Guidance, Control, and Dynamics, 8, 620, 10.2514/3.20031 · DOI · Paper page
  4. VanOverschee, 1996, Subspace Identification for Linear Systems: Theory, Implementation, Applications, 10.1007/978-1-4613-0465-4 · DOI · Paper page
  5. Brincker, 2001, Modal identification of output-only systems using frequency domain decomposition, Smart Material and Structures, 10, 441, 10.1088/0964-1726/10/3/303 · DOI · Paper page
  6. Farrar, 2012, Structural Health Monitoring: A Machine Learning Perspective, 10.1002/9781118443118 · DOI · Paper page
  7. Peeters, 2001, Stochastic system identification for operational modal analysis: a review, Journal of Dynamic Systems, Measurement, and Control, 123, 659, 10.1115/1.1410370 · DOI · Paper page
  8. Kijewski, 2003, Wavelet transforms for system identification in civil engineering, Computer-aided Civil and Infrastructural Engineering, 18, 339, 10.1111/1467-8667.t01-1-00312 · DOI · Paper page
  9. Yang, 2003, System identification of linear structures based on Hilbert-Huang spectral analysis, part 1: normal modes, Earthquake Engineering and Structural Dynamics, 32, 1443, 10.1002/eqe.287 · DOI · Paper page
  10. Yang, 2004, Hilbert-Huang based approach for structural damage detection, ASCE Journal of Engineering Mechanics, 130, 85, 10.1061/(ASCE)0733-9399(2004)130:1(85) · doi:10.1061/(asce)0733-9399(2004)130:1(85 · Paper page
  11. Nagarajaiah, 2009, Output only identification and structural damage detection using time frequency and wavelet techniques, Earthquake Engineering and Engineering Vibration, 8, 583, 10.1007/s11803-009-9120-6 · DOI · Paper page
  12. Bruckstein, 2008, From sparse solutions of systems of equations to sparse modeling of signals and images, SIAM Review, 51, 34, 10.1137/060657704 · DOI · Paper page
  13. Candes, 2009, Robust principal component analysis, Journal of ACM, 58, 1, 10.1145/1970392.1970395 · DOI · Paper page
  14. Hyvarinen, 2001, Independent Component Analysis, 10.1002/0471221317 · DOI · Paper page
  15. Cover, 1991, Elements of Information Theory, 10.1002/0471200611 · DOI · Paper page
  16. Jolliffe, 1986, Principal Component Analysis, 10.1007/978-1-4757-1904-8 · DOI · Paper page
  17. Feeny, 1998, On the physical interpretation of proper orthogonal modes in vibration, Journal of Sound and Vibration, 211, 607, 10.1006/jsvi.1997.1386 · doi:10.1006/jsvi.1997.1386
  18. Yang, 2014, Data compression of structural seismic responses using principled independent component analysis, ASCE Journal of Structural Engineering, 140, 0401, 10.1061/(ASCE)ST.1943-541X.0000946 · doi:10.1061/(asce)st.1943-541x.0000946
  19. Yang, 2014, Blind denoising of structural responses with outliers via principal component pursuit, Structural Control and Health Monitoring, 21, 962, 10.1002/stc.1624 · DOI · Paper page
  20. Belouchrani, 1997, A blind source separation technique using second-order statistics, IEEE Transactions on Signal Processing, 45, 434, 10.1109/78.554307 · DOI · Paper page
  21. Stone, 2001, Blind source separation using temporal predictability, Neural Computation, 13, 1559, 10.1162/089976601750265009 · DOI · Paper page
  22. Antoni, 2005, Special issue: blind source separation, Mechanical Systems and Signal Processing, 19, 1163, 10.1016/j.ymssp.2005.08.021 · DOI
  23. Kerschen, 2007, Physical interpretation of independent component analysis in structural dynamics, Mechanical Systems and Signal Processing, 21, 1561, 10.1016/j.ymssp.2006.07.009 · DOI
  24. Poncelet, 2007, Output-only modal analysis using blind source separation techniques, Mechanical Systems and Signal Processing, 21, 2335, 10.1016/j.ymssp.2006.12.005 · DOI · Paper page
  25. McNeill, 2008, A framework for blind identification using joint approximate diagonalization, Mechanical Systems and Signal Processing, 22, 1526, 10.1016/j.ymssp.2008.01.010 · DOI
  26. Hazra, 2010, Modified cross-correlation method for the blind identification of structures, ASCE Journal of Engineering Mechanics, 136, 889, 10.1061/(ASCE)EM.1943-7889.0000133 · DOI
  27. Abazarsa, 2013, Response-only modal identification of structures using limited sensors, Structural Control and Health Monitoring, 20, 987, 10.1002/stc.1513 · DOI
  28. Yang, 2013, Time-frequency blind source separation using independent component analysis for output-only modal identification of highly-damped structures, ASCE Journal of Structural Engineering, 139, 1780, 10.1061/(ASCE)ST.1943-541X.0000621 · DOI
  29. Yang, 2014, Blind identification of damage in time-varying system using independent component analysis with wavelet transform, Mechanical Systems and Signal Processing, 47, 3, 10.1016/j.ymssp.2012.08.029 · DOI
  30. Antoni, 2013, A study and extension of second-order blind source separation to operational modal analysis, Journal of Sound and Vibration, 332, 1079, 10.1016/j.jsv.2012.09.016 · DOI
  31. Yang, 2013, Output-only modal identification with limited sensors using sparse component analysis, Journal of Sound and Vibration, 332, 4741, 10.1016/j.jsv.2013.04.004 · DOI · Paper page
  32. Nagarajaiah, 2015, Blind modal identification of output-only non-proportionally-damped structures by time-frequency complex independent component analysis, Smart Structures and Systems, 15, 81, 10.12989/sss.2015.15.1.081 · doi:10.12989/sss.2015.15.1.081
  33. Sadhu, 2011, Decentralized modal identification using sparse blind source separation, Smart Materials and Structures, 20, 125009, 10.1088/0964-1726/20/12/125009 · doi:10.1088/0964-1726/20/12/125009
  34. Ghahari, 2014, Blind modal identification of structures from spatially sparse seismic response signals, Structural Control and Health Monitoring, 21, 649
  35. Yang, 2013, Blind modal identification of output-only structures in time domain based on complexity pursuit, Earthquake Engineering and Structural Dynamics, 42, 1885, 10.1002/eqe.2302 · DOI
  36. Xie, 2005, A note on Stone's conjecture of blind source separation, Neural Computation, 17, 321, 10.1162/0899766053011492 · DOI
  37. Yang, 2015, Real-time output-only identification of time-varying cable tension via complexity pursuit, ASCE Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0001337 · DOI
  38. Zhang, 2007, Linear predictor-based lossless compression of vibration sensor data: systems approach, Journal of Engineering Mechanics, 133, 431, 10.1061/(ASCE)0733-9399(2007)133:4(431) · doi:10.1061/(asce)0733-9399(2007)133:4(431
  39. Yildirim, 2013, A prediction-error-based method for data transmission and damage detection in wireless sensor networks for structural health monitoring, Journal of Vibration and Control, 19, 2244, 10.1177/1077546313501538 · doi:10.1177/1077546313501538
  40. Bogdanovic, 2014, Spatio-temporal protocol for power-efficient acquisition wireless sensors based SHM, Smart Structures and Systems, 14, 1, 10.12989/sss.2014.14.1.001 · doi:10.12989/sss.2014.14.1.001
  41. De Boe, 2003, Principal component analysis of a piezo-sensor array for damage localization, International Journal of Structural Health Monitoring, 2, 137, 10.1177/1475921703002002005 · DOI · Paper page
  42. Friswell, 1999, Sensor validation for smart structures, Journal of Intelligent Material Systems and Structures, 10, 973, 10.1106/GVD2-EGPN-C5B1-DPNX · DOI · Paper page
  43. Kerschen, 2005, Sensor validation using principal component analysis, Smart Materials and Structures, 14, 36, 10.1088/0964-1726/14/1/004 · DOI
  44. Yang, 2015, Data compression of very large-scale structural seismic and typhoon vibration responses by low-rank representation with matrix reshape, Structural Control and Health Monitoring, 22, 1119, 10.1002/stc.1737 · DOI
  45. Yang, 2014, Blind identification of damage in time-varying systems using independent component analysis with wavelet transform, Mechanical Systems and Signal Processing, 47, 3, 10.1016/j.ymssp.2012.08.029 · DOI
  46. Yang, 2015, Dynamic imaging: real-time detection of local structural damage with blind separation of low-rank background and sparse innovation, ASCE Journal of Structural Engineering,, 10.1061/(ASCE)ST.1943-541X.0001334 · DOI
  47. Adeli, 2001, Neural networks in civil engineering: 1989-2000, Computer-Aided Civil and Infrastructure Engineering, 16, 126, 10.1111/0885-9507.00219 · DOI · Paper page
  48. Worden, 2001, Damage identification using support vector machines, Smart Materials and Structures, 10, 540, 10.1088/0964-1726/10/3/317 · DOI
  49. Trendafilova, 2008, Vibration-based damage detection in an aircraft wing scaled model using principal component analysis and pattern recognition, Journal of Sound and Vibration, 313, 560, 10.1016/j.jsv.2007.12.008 · DOI
  50. Dharap, 2006, Structural health monitoring using ARMarkov observers, Journal of Intelligent Material Systems and Structures, 17, 469, 10.1177/1045389X06058793 · DOI
  51. Sun, 2013, Identification of structural models using a modified Artificial Bee Colony algorithm, Computers & Structures, 116, 59, 10.1016/j.compstruc.2012.10.017 · DOI
  52. Sun, 2013, Nondestructive identification of multiple flaws using XFEM and a topologically adapting artificial bee colony algorithm, International Journal for Numerical Methods in Engineering, 95, 871, 10.1002/nme.4529 · DOI
  53. Lynch, 2006, A summary review of wireless sensors and sensor networks for structural health monitoring, Shock and Vibration Digest, 38, 91, 10.1177/0583102406061499 · DOI · Paper page
  54. Bao, 2011, Compressive sampling for accelerometer signals in structural health monitoring, International Journal of Structural Health Monitoring, 10, 235, 10.1177/1475921710373287 · DOI · Paper page
  55. Mascarenas, 2013, Compressed sensing techniques for detecting damage in structures, International Journal of Structural Health Monitoring, 12, 325, 10.1177/1475921713486164 · DOI · Paper page
  56. O'Connor, 2014, Compressed sensing embedded in an operational wireless sensor network to achieve energy efficiency in long-term monitoring applications, Smart Materials and Structures, 23, 085014, 10.1088/0964-1726/23/8/085014 · DOI
  57. Yang, 2015, Output-only modal identification by compressed sensing: non-uniform low-rate random sampling, Mechanical Systems and Signal Processing, 56, 15, 10.1016/j.ymssp.2014.10.015 · DOI
  58. Tausiesakul B Gkoktsi K Giaralis A Compressive sensing spectral estimation for output-only structural system identification Proc. 7th Int. Conf. Computational Stochastic Mechanics 2014
  59. Comerford, 2015, Compressive sensing based stochastic process power spectrum estimation subject to missing data, Probabilistic Engineering Mechanics
  60. Bao, 2012, Compressive sampling based data loss recovery for wireless sensor networks used in civil structural health monitoring, Structural Health Monitoring
  61. Yang, 2015, Robust data transmission and recovery of images by compressed sensing for structural health diagnosis, Structural Control and Health Monitoring
  62. Yang, 2015, Harnessing data structure for recovery of structural vibration responses from incomplete data: sparse representation versus low-rank structure, Mechanical Systems and Signal Processing
  63. Candès, 2009, Exact matrix completion via convex optimization, Foundations of Computational Mathematics, 9, 717, 10.1007/s10208-009-9045-5 · DOI · Paper page
  64. Mallat, 2009, A wavelet tour of signal processing: the sparse way

Cited by

Metadata

Authors
Nagarajaiah, S., & Yang, Y.
Venue
Structural Control and Health Monitoring
Publisher
Wiley
Published
2016-02-23
Volume
24
Issue
1
Pages
e1851
ISSN
1545-2255 (ISSN-L)
OpenAlex
W2283608459
Cited by
121
References
5
FWCI
17.22
Type
journal article
Language
en
Open access
bronze
Licence

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.