Genetic algorithm based optimal sensor placement for L1-regularized damage detection
Open accessThe DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Sparse recovery theory has been applied to damage detection by utilizing the sparsity feature of structural damage. The theory requires that the columns of the sensing matrix suffice certain independence criteria. In l1-regularized damage detection, the sensitivity matrix serves as the sensing matrix and is directly related to sensor locations. An optimal sensor placement technique is proposed such that the resulting sensitivity matrix is of the maximum independence in the columns or is of the least mutual coherence. Given a total number of sensors, the selection of sensor locations is a combinatorial problem. A genetic algorithm is thus used to solve this optimization problem, in which the mutual coherence of the sensitivity matrix is minimized. The obtained optimal sensor locations and associated sensitivity matrix are used in l1-regularized damage detection. An experimental cantilever beam and a three-storey frame are utilized to verify the effectiveness and reliability of the proposed sensor placement technique. Results show that using the modal data based on the optimal sensor placement can identify damage location and severity more accurately than using the ones based on uniformly selected sensor locations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899 · cited 8×
“According to sparse recovery theory, {θ} can be recovered by solving the following optimization program14: bθ ¼ arg minbθ X½ θf g− yf gk k22 þ β θf gk k1: (6) As shown in Equation (5), through operating on the unknown vector {θ}, the sensing matrix [X] stores the information about {θ} in the measurements {y}.”
BackgroundInfluentialDetection of structural damage through changes in frequency: a review
Salawu, O. S. (1997) · Engineering Structures · doi:10.1016/s0141-0296(96)00149-6 · Cited by 2,080
Structural damage detection based on l 1 regularization using natural frequencies and mode shapes
Hou, R., Xia, Y., & Zhou, X. (2018) · Structural Control and Health Monitoring · doi:10.1002/stc.2107 · Cited by 127
Self-citationZhang, C. D., & Xu, Y. L. (2016) · Structural Control and Health Monitoring · doi:10.1002/stc.1785 · Cited by 106
Yang, Y., & Nagarajaiah, S. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.09.009 · Cited by 101
L 1 regularization approach to structural damage detection using frequency data
Zhou, X.-Q., Xia, Y., & Weng, S. (2015) · Structural Health Monitoring · doi:10.1177/1475921715604386 · Cited by 99
Self-citationHernandez, E. M. (2014) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.12.009 · Cited by 74
Emerging data technology in structural health monitoring: compressive sensing technology
Bao, Y., Li, H., & Ou, J. (2014) · Journal of Civil Structural Health Monitoring · doi:10.1007/s13349-013-0064-1 · Cited by 43
Sensor Placement for Structural Damage Detection considering Measurement Uncertainties
Zhou, X.-Q., Xia, Y., & Hao, H. (2013) · Advances in Structural Engineering · doi:10.1260/1369-4332.16.5.899 · Cited by 17
Self-citationSparsity-Aware Learning and Compressed Sensing: An Overview
Theodoridis, S., Kopsinis, Y., & Slavakis, K. (2014) · Academic Press Library in Signal Processing · doi:10.1016/b978-0-12-396502-8.00023-1 · Cited by 14
Research works printed but not linked: 35
- Kim, 2003, Crack detection in beam-type structures using frequency data, J Sound Vib, 259, 145, 10.1006/jsvi.2002.5132 · DOI · Paper page
- Shi, 2000, Damage localization by directly using incomplete mode shapes, J Eng Mech, 126, 656, 10.1061/(ASCE)0733-9399(2000)126:6(656) · doi:10.1061/(asce)0733-9399(2000)126:6(656 · Paper page
- Xu, 2009, Experimental investigation on statistical moment-based structural damage detection method, Struct Health Monit, 8, 555, 10.1177/1475921709341011 · DOI
- Sohn H Farrar CR Hemez FM Shunk DD Stinemates DW Nadler BR Czarnecki JJ A review of structural health monitoring literature: 1996-2001 Los Alamos National Laboratory Report 2003
- Engl, 1996, Regularization of Inverse Problems, 10.1007/978-94-009-1740-8 · DOI · Paper page
- Candès EJ Compressive sampling Proceedings of the International Congress of Mathematicians
- Theodoridis, 2013, Academic Press Library in Signal Processing: Signal Processing Theory and Machine Learning, 1271
- Candès, 2005, Decoding by linear programming, IEEE Trans Inf Theory, 51, 4203, 10.1109/TIT.2005.858979 · DOI · Paper page
- Candès, 2006, Robust uncertainty principles: exact signal reconstruction from highly incomplete frequency information, IEEE Trans Inf Theory, 5, 489, 10.1109/TIT.2005.862083 · DOI · Paper page
- Kammer, 1991, Sensor placement for on-orbit modal identification and correlation of large space structures, J Guid Control Dyn, 14, 251, 10.2514/3.20635 · DOI · Paper page
- Kirkegaard, 1994, On the optimal locations of sensors for parametric identification of linear structural systems, Mech Syst Signal Process, 8, 639, 10.1006/mssp.1994.1045 · DOI
- Papadimitriou, 2004, Optimal sensor placement methodology for parametric identification of structural systems, J Sound Vib, 278, 923, 10.1016/j.jsv.2003.10.063 · DOI · Paper page
- Chang, 2014, Optimal sensor placement for structural modal identification, J Bridg Eng, ASCE, 19, 10.1061/(ASCE)BE.1943-5592.0000594 · DOI · Paper page
- Heo, 1997, Optimal transducer placement for health monitoring of long span bridge, Soil Dyn Earthq Eng, 16, 495, 10.1016/S0267-7261(97)00010-9 · DOI · Paper page
- Meo, 2005, On the optimal sensor placement techniques for a bridge structure, Eng Struct, 27, 1488, 10.1016/j.engstruct.2005.03.015 · DOI · Paper page
- Yi, 2015, Health monitoring sensor placement optimization for Canton Tower using immune monkey algorithm, Struct Control Health Monit, 22, 123, 10.1002/stc.1664 · DOI · Paper page
- Shi, 2000, Optimum sensor placement for structural damage detection, J Eng Mech, ASCE, 126, 1173, 10.1061/(ASCE)0733-9399(2000)126:11(1173) · doi:10.1061/(asce)0733-9399(2000)126:11(1173 · Paper page
- Xia, 2000, Measurement selection for vibration-based structural damage identification, J Sound Vib, 236, 89, 10.1006/jsvi.2000.2960 · DOI
- Casciati, 2008, Stiffness identification and damage localization via differential evolution algorithms, Struct Control Health Monit, 15, 436, 10.1002/stc.236 · doi:10.1002/stc.236
- Casciati, 2017, Damage localization in a cable-stayed bridge via bio-inspired metaheuristic tools, Struct Control Health Monit, 24, e1922, 10.1002/stc.1922 · DOI
- Goldberg, 1989, Genetic Algorithms in Search, Machine Learning and Optimisation
- Yao, 1993, Sensor placement for on-orbit modal identification via a genetic algorithm, AIAA Journal, 31, 1167, 10.2514/3.11868 · DOI
- Worden, 2001, Optimal sensor placement for fault detection, Eng Struct, 23, 885, 10.1016/S0141-0296(00)00118-8 · DOI · Paper page
- Liu, 2008, Optimal sensor placement for spatial lattice structure based on genetic algorithms, J Sound Vib, 317, 175, 10.1016/j.jsv.2008.03.026 · DOI · Paper page
- Nelson, 1976, Simplified calculation of eigenvector derivatives, AIAA J, 14, 1201, 10.2514/3.7211 · DOI · Paper page
- Weng, 2011, An iterative substructuring approach to the calculation of eigensolution and eigensensitivity, J Sound Vib, 330, 3368, 10.1016/j.jsv.2011.02.001 · DOI
- Gorodnitsky, 1997, Sparse signal reconstruction from limited data using FOCUSS: a reweighted minimum norm algorithm, IEEE Trans Signal Process, 45, 600, 10.1109/78.558475 · DOI · Paper page
- Donoho, 2003, Optimally sparse representation in general (nonorthogonal) dictionaries via l1 minimization, Proc Natl Acad Sci, 100, 2197, 10.1073/pnas.0437847100 · DOI · Paper page
- Mallat, 1993, Matching pursuit in a time-frequency dictionary, IEEE Trans Signal Process, 49, 3397, 10.1109/78.258082 · DOI · Paper page
- Elad, 2007, Optimized projections for compressed sensing, IEEE Trans Signal Process, 55, 5695, 10.1109/TSP.2007.900760 · DOI · Paper page
- Mo, 2011, New bounds on the restricted isometry constant δ2k, Appl Comput Harmon Anal, 31, 460, 10.1016/j.acha.2011.04.005 · doi:10.1016/j.acha.2011.04.005
- Foucart, 2010, A note on guaranteed sparse recovery via l1-minimization, Appl Comput Harmon Anal, 29, 97, 10.1016/j.acha.2009.10.004 · doi:10.1016/j.acha.2009.10.004
- Boyd, 2004, Convex Optimization, 10.1017/CBO9780511804441 · DOI · Paper page
- Holland, 1975, Adaption in Natural and Artificial Systems
- Hou, 2018, Selection of regularization parameter for l1-regularized damage detection, J Sound Vib, 423, 141, 10.1016/j.jsv.2018.02.064 · DOI
Cited by
Hou, R., & Xia, Y. (2021) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2020.115741 · Cited by 674
Self-citationReview of finite element model updating methods for structural applications
Ereiz, S., Duvnjak, I., & Fernando Jiménez-Alonso, J. (2022) · Structures · doi:10.1016/j.istruc.2022.05.041 · Cited by 371
Laplace approximation in sparse Bayesian learning for structural damage detection
Wang, X., Hou, R., Xia, Y., & Zhou, X. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2020.106701 · Cited by 32
Self-citationMohammed, B. (2026) · Sensor Review · doi:10.1108/sr-10-2025-0822 · Cited by 3
Metadata
- Authors
- Hou, R., Xia, Y., Xia, Q., & Zhou, X.
- Venue
- Structural Control and Health Monitoring
- Publisher
- Wiley
- Published
- 2018-10-08
- Volume
- 26
- Issue
- 1
- Pages
- e2274
- ISSN
- 1545-2255 (ISSN-L)
- OpenAlex
- W2896445596
- Cited by
- 59
- References
- 10
- FWCI
- 6.96
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- doi.wiley.com/10.1002/tdm_license_1.1 (tdm)
- onlinelibrary.wiley.com/termsAndConditions#vor (vor)
- Funders
- National Natural Science Foundation of China (51678364)
- RGC General Research Grant (152125/17E)
- PolyU Research Grant (1-BBAG)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.