Cited by 99Vibration Control and Rheological FluidsSeismic and Structural Analysis of Tall BuildingsStructural Engineering and Vibration Analysis

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Vertically distributed multiple tuned mass dampers in tall buildings: performance analysis and preliminary design

Moon, Kyoung Sun·2010·The Structural Design of Tall and Special Buildings

Abstract

This paper investigates the structural performance of vertically distributed multiple tuned mass dampers (MTMDs), which can save valuable occupiable space near the top of tall buildings, control the first as well as higher mode responses and be installed more easily because of smaller tuned mass damper (TMD) masses. Vertically distributed MTMD theory is presented. With this theory, the effectiveness of vertically distributed MTMDs along the building height is predicted using simplified models, compared with the conventional TMDs installed near the top of tall buildings. Vertically distributed MTMDs are designed for a typical 60‐storey tall building subjected to representative dynamic wind loads, and their performance is measured. The results of these studies show that TMDs can be distributed vertically along the building height without substantial loss of their effectiveness. Considering their advantages over the conventional system, vertically distributed MTMDs possess a high potential of practical applications for tall‐building motion control. Copyright © 2009 John Wiley & Sons, Ltd.

Overview

Integrity signals

Registry

Crossref · 10.1002/tal.499

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 1 references

Research works printed but not linked: 6

  1. 10.1002/eqe.4290240209 · DOI
  2. BergmanLA McFarlandDM HallJK JohnsonEA KareemA.1989.Optimal distribution of tuned mass dampers in wind‐sensitive structures.Structural Safety and Reliability: Proceedings of ICOSSAR '89 the 5th International Conference on Structural Safety and Reliability ASME New York 95–102.
  3. Connor JJ, 2003, Introduction to Structural Motion Control
  4. Hartog D, 1956, Mechanical Vibrations
  5. MoonK.2005.Dynamic Interrelationship between Technology and Architecture in Tall Buildings. PhD Dissertation Department of Architecture Massachusetts Institute of Technology Cambridge MA.
  6. 10.1002/eqe.4290220105 · DOI · Paper page

Cited by

Sorted by citations

Metadata

Authors
Moon, K. S.
Affiliations
Yale University (US)
Corresponding author
Moon, Kyoung Sun
Venue
The Structural Design of Tall and Special Buildings
Publisher
Wiley
Published
2009-01-07
Volume
19
Issue
3
Pages
347-366
ISSN
  • 1541-7794 (ISSN-L)
  • 1541-7808
OpenAlex
W2094284485
Cited by
99
References
1
Citations by year
2026: 7 · 2025: 5 · 2024: 6 · 2023: 9 · 2022: 13 · 2021: 4 · 2020: 3 · 2019: 8 · 2018: 8 · 2017: 10 · 2016: 7 · 2015: 6 · 2014: 4 · 2013: 6 · 2012: 2
FWCI
3.33
Type
journal article
Language
en
Open access
closed
Locations
The Structural Design of Tall and Special Buildings (publishedVersion)
Topics
  • Physical Sciences › Engineering › Civil and Structural Engineering › Vibration Control and Rheological Fluids
  • Physical Sciences › Engineering › Civil and Structural Engineering › Seismic and Structural Analysis of Tall Buildings
  • Physical Sciences › Engineering › Civil and Structural Engineering › Structural Engineering and Vibration Analysis
Keywords
multiple tuned mass dampers, high-rise buildings, structural vibration control, dynamic wind loads, higher mode response, multi-storey buildings

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review