The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Trends in the Design, Manufacture and Evaluation of Wind Turbine Blades
Abstract
Wind turbine blades continue to be the target of technological improvements by the use of better designs, materials, manufacturing, analysis and testing. As the size of turbines has grown over the past decade, designers have restrained the associated growth in blade weight to less than would have been possible through simple scaling‐up of past approaches. These past improvements are briefly summarized. Manufacturing trends and design drivers are presented, as are the ways these design drivers have changed. Issues related to blade material choices are described, first for the currently dominant glass fibre technology and then for the potential use of carbon fibres. Some possible directions for future blade design options are presented, namely new planforms, aerofoils and aeroelastic tailoring. The significant improvement in sophistication of stress analysis and full‐scale blade testing are also discussed. Copyright © 2003 John Wiley & Sons, Ltd.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
White, D. J. (2004) · doi:10.2172/15007390 · Cited by 69
Cited by
Grand challenges in the science of wind energy
Veers, P., Dykes, K., Lantz, E., Barth, S., Bottasso, C. L., Carlson, O., Clifton, A., Green, J., Green, P., Holttinen, H., et al. (2019) · Science · doi:10.1126/science.aau2027 · Cited by 1,242
Self-citationPast, present and future prospective of global carbon fibre composite developments and applications
Zhang, J., Lin, G., Vaidya, U., & Wang, H. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.110463 · Cited by 1,026
High-power wind energy conversion systems: State-of-the-art and emerging technologies
Yaramasu, V., Wu, B., Sen, P. C., Kouro, S., & Narimani, M. (2015) · Proceedings of the IEEE · doi:10.1109/jproc.2014.2378692 · Cited by 991
Review of performance optimization techniques applied to wind turbines
Chehouri, A., Younes, R., Ilinca, A., & Perron, J. (2015) · Applied Energy · doi:10.1016/j.apenergy.2014.12.043 · Cited by 388
Passive structural control of offshore wind turbines
Lackner, M. A., & Rotea, M. A. (2011) · Wind Energy · doi:10.1002/we.426 · Cited by 378
Metadata
- Authors
- Veers, P. S., Ashwill, T. D., Sutherland, H. J., Laird, D. L., Lobitz, D. W., Griffin, D. A., Mandell, J. F., Musial, W. D., Jackson, K., Zuteck, M., Miravete, A., Tsai, S. W., & Richmond, J. L.
- Venue
- Wind Energy
- Publisher
- Wiley
- Published
- 2003-06-03
- Volume
- 6
- Issue
- 3
- Pages
- 245-259
- ISSN
- 1095-4244 (ISSN-L)
- 1099-1824
- OpenAlex
- W2069014698
- Cited by
- 269
- References
- 1
- FWCI
- 1.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.