The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Use of General Purpose Adsorption Isotherms for Heavy Metal–Clay Mineral Interactions
Open accessAbstract
Abstract General purpose adsorption isotherm equations were fitted to the sorption data of lead and cadmium on both unmodified and Ca-saturated kaolinite and montmorillonite. Langmuir–Freundlich, Redlich–Petersen, Toth, Dubinin–Radushkevich, competitive Langmuir, and some modified forms of these isotherms were fitted to experimental data, and their goodnesses of fit are compared. The adjustable parameters of the Langmuir- and Freundlich-based isotherms were estimated by nonlinear least-squares analysis. The application of these two isotherms which allow for the effect of surface heterogeneity for both multiple and single desorbing ions during the sorption process was also studied. It was concluded that Redlich–Petersen, Toth, and original and modified forms of Dubinin–Radushkevich isotherms perform superior to the others both in high and low concentration regions for both unmodified and Ca-saturated clays. Competitive Langmuir adsorption isotherm for Ca-saturated clays fitted well for Pb adsorption, while a change of slope was observed for Cd adsorption.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Phenomenological Theory of Ion Solvation. Effective Radii of Hydrated Ions
Nightingale, E. R. (1959) · The Journal of Physical Chemistry · doi:10.1021/j150579a011 · Cited by 3,505
Cited by
Insights into the modeling of adsorption isotherm systems
Foo, K. Y., & Hameed, B. H. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.09.013 · Cited by 8,479
Non-conventional low-cost adsorbents for dye removal: A review
CRINI, G. (2006) · Bioresource Technology · doi:10.1016/j.biortech.2005.05.001 · Cited by 4,508
Heavy metal adsorbents prepared from the modification of cellulose: A review
O’Connell, D. W., Birkinshaw, C., & O’Dwyer, T. F. (2008) · Bioresource Technology · doi:10.1016/j.biortech.2008.01.036 · Cited by 1,299
Heavy metal adsorption by modified oak sawdust: Thermodynamics and kinetics
Argun, M. E., Dursun, S., Ozdemir, C., & Karatas, M. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.095 · Cited by 836
Monolayer and multilayer adsorption isotherm models for sorption from aqueous media
Saadi, R., Saadi, Z., Fazaeli, R., & Fard, N. E. (2015) · Korean Journal of Chemical Engineering · doi:10.1007/s11814-015-0053-7 · Cited by 708
Removal of zinc, copper and lead by natural zeolite—a comparison of adsorption isotherms
Perić, J., Trgo, M., & Vukojević Medvidović, N. (2004) · Water Research · doi:10.1016/j.watres.2003.12.035 · Cited by 575
Adsorption processes for the removal of contaminants from wastewater
Sahoo, T. R., & Prelot, B. (2020) · Nanomaterials for the Detection and Removal of Wastewater Pollutants · doi:10.1016/b978-0-12-818489-9.00007-4 · Cited by 416
Regeneration performance of clay-based adsorbents for the removal of industrial dyes: a review
Momina, M., Shahadat, M., & Isamil, S. (2018) · RSC Advances · doi:10.1039/c8ra04290j · Cited by 409
On the Use of Linearized Langmuir Equations
Bolster, C. H., & Hornberger, G. M. (2007) · Soil Science Society of America Journal · doi:10.2136/sssaj2006.0304 · Cited by 317
Adsorption of phenols by papermill sludges
Calace, N., Nardi, E., Petronio, B. M., & Pietroletti, M. (2002) · Environmental Pollution · doi:10.1016/s0269-7491(01)00303-7 · Cited by 304
Adsorption of heavy metals from electroplating wastewater by wood sawdust
Šćiban, M., Radetić, B., Kevrešan, Ž., & Klašnja, M. (2007) · Bioresource Technology · doi:10.1016/j.biortech.2005.12.014 · Cited by 289
Current advancement and future prospect of biosorbents for bioremediation
Singh, S., Kumar, V., Datta, S., Dhanjal, D. S., Sharma, K., Samuel, J., & Singh, J. (2020) · Science of The Total Environment · doi:10.1016/j.scitotenv.2019.135895 · Cited by 279
Use of clinoptilolite for the removal of nickel ions from water: Kinetics and thermodynamics
Argun, M. E. (2008) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2007.05.008 · Cited by 224
Ugwu, E. I., Othmani, A., & Nnaji, C. C. (2022) · International Journal of Environmental Science and Technology · doi:10.1007/s13762-021-03560-3 · Cited by 105
Nanomaterials usage as adsorbents for the pollutants removal from wastewater; a review
Naser, J. A., Ahmed, Z. W., & Ali, E. H. (2021) · Materials Today: Proceedings · doi:10.1016/j.matpr.2020.12.584 · Cited by 31
Metadata
- Authors
- Altın, O., Özbelge, H. Ö., & Doğu, T.
- Venue
- Journal of Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 1998-02
- Volume
- 198
- Issue
- 1
- Pages
- 130-140
- ISSN
- 0021-9797 (ISSN-L)
- OpenAlex
- W1984684815
- Cited by
- 234
- References
- 1
- FWCI
- 6.77
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.