The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Drop Penetration into Porous Powder Beds
Open accessAbstract
The kinetics of drop penetration were studied by filming single drops of several different fluids (water, PEG200, PEG600, and HPC solutions) as they penetrated into loosely packed beds of glass ballotini, lactose, zinc oxide, and titanium dioxide powders. Measured times ranged from 0.45 to 126 s and depended on the powder particle size, viscosity, surface tensions, and contact angle. The experimental drop penetration times were compared to existing theoretical predictions by M. Denesuk et al. (J. Colloid Interface Sci.158, 114, 1993) and S. Middleman ("Modeling Axisymmetric Flows: Dynamics of Films, Jets, and Drops," Academic Press, San Diego, 1995) but did not agree. Loosely packed powder beds tend to have a heterogeneous bed structure containing large macrovoids which do not participate in liquid flow but are included implicitly in the existing approach to estimating powder pore size. A new two-phase model was proposed where the total volume of the macrovoids was assumed to be the difference between the bed porosity and the tap porosity. A new parameter, the effective porosity epsilon(eff), was defined as the tap porosity multiplied by the fraction of pores that terminate at a macrovoid and are effectively blocked pores. The improved drop penetration model was much more successful at estimating the drop penetration time on all powders and the predicted times were generally within an order of magnitude of the experimental results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Perry's chemical engineers' handbook
(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121
Perry's chemical engineers' handbook
(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,897
Foundations of Colloid Science
Hunter, R. J. (1987) · Cited by 3,747
Modeling Axisymmetric Flows: Dynamics of Films, Jets, and Drops
Middleman, S. (1995) · Cited by 198
Radial Capillary Penetration into Paper: Limited and Unlimited Liquid Reservoirs
Danino, D., & Marmur, A. (1994) · Journal of Colloid and Interface Science · doi:10.1006/jcis.1994.1290 · Cited by 109
Description of agglomerate growth
Schaafsma, S. H., Vonk, P., Segers, P., & Kossen, N. W. F. (1998) · Powder Technology · doi:10.1016/s0032-5910(97)03399-8 · Cited by 96
Contact angle measurements of iron ore powders
Iveson, S. M., Holt, S., & Biggs, S. (2000) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(99)00455-0 · Cited by 60
Self-citationThe use of the Washburn method in determining the contact angles of lactose powder
Kiesvaara, J., & Yliruusi, J. K. (1993) · International Journal of Pharmaceutics · doi:10.1016/0378-5173(93)90266-i · Cited by 42
Cited by
3D printing: Printing precision and application in food sector
Liu, Z., Zhang, M., Bhandari, B., & Wang, Y. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.08.018 · Cited by 858
Binder jetting: A review of process, materials, and methods
Ziaee, M., & Crane, N. B. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.05.031 · Cited by 819
Shirazi, S. F. S., Gharehkhani, S., Mehrali, M., Yarmand, H., Metselaar, H. S. C., Adib Kadri, N., & Osman, N. A. A. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/3/033502 · Cited by 755
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
Method of formulating geopolymer for 3D printing for construction applications
Xia, M., & Sanjayan, J. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.136 · Cited by 359
Metadata
- Authors
- Hapgood, K. P., Litster, J. D., Biggs, S. R., & Howes, T.
- Venue
- Journal of Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 2002-09
- Volume
- 253
- Issue
- 2
- Pages
- 353-366
- ISSN
- 0021-9797 (ISSN-L)
- OpenAlex
- W2073196697
- Cited by
- 305
- References
- 8
- FWCI
- 2.48
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Drop Penetration into Porous Powder Beds. https://app.cochat.ai/papers/10.1006/jcis.2002.8527
- The paper
- Hapgood, K. P., Litster, J. D., Biggs, S. R., & Howes, T. (2002). Drop Penetration into Porous Powder Beds. Journal of Colloid and Interface Science. https://doi.org/10.1006/jcis.2002.8527
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.