Fault-Diagnosis and Fault-Tolerant-Control in Industrial Processes and Electrical Drives
The DOI matches its Crossref record; 40 of the 42 references it cites were found in a registry or an index.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“From the mid-2000s, as a result of intensively developing FDD methods for AC motor drives, first FTC strategies for drive systems began to appear [33].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [33]
In the citing paper
“Since hardware redundancy is expensive or sometimes impossible to implement, software redundancy is a good solution, which involves the use of various types of state variable estimators and replacing the signals from the damaged sensors with estimated ones [33], [274].”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [33]
In the citing paper
“an increased robustness to selected faults can be achieved at the expense of reduced system ratings.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [33]
In the citing paper
“when designing a PFTC system, only selected system failures can be taken into account, usually those that do not have a significant impact on the system operation, because only under such conditions the controller can be resistant to a failure;”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [33]
In the citing paper
“Due to the fact that most failures do not occur very often, it is difficult to justify a significant reduction in system failure-free performance just to achieve some insensitivity to a limited failure class.”
From Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges (2022) · cites this paper as [33]
Citations
Cites
Diagnosis and Fault-Tolerant Control
Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2003) · Springer eBooks · doi:10.1007/978-3-662-05344-7 · Cited by 2,789
Isermann, R. (2006) · Springer eBooks · doi:10.1007/3-540-30368-5 · Cited by 2,217
A Review on Basic Data-Driven Approaches for Industrial Process Monitoring
Yin, S., Ding, S. X., Xie, X., & Luo, H. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301773 · Cited by 1,716
From model-based control to data-driven control: Survey, classification and perspective
Hou, Z.-S., & Wang, Z. (2013) · Information Sciences · doi:10.1016/j.ins.2012.07.014 · Cited by 1,405
Condition Monitoring for Device Reliability in Power Electronic Converters: A Review
Yang, S., Xiang, D., Bryant, A., Mawby, P., Ran, L., & Tavner, P. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2049377 · Cited by 1,278
Trends in the application of model-based fault detection and diagnosis of technical processes
Isermann, R., & Ballé, P. (1997) · Control Engineering Practice · doi:10.1016/s0967-0661(97)00053-1 · Cited by 1,183
A Literature Review of IGBT Fault Diagnostic and Protection Methods for Power Inverters
Lu, B., & Sharma, S. K. (2009) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2009.2027535 · Cited by 985
Control in Power Electronics: selected problems
Kaźmierkowski, M. P., Krishnan, R., & Blaabjerg, F. (2002) · Cited by 873
Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines
Vas, P. (1992) · doi:10.1093/oso/9780198593751.001.0001 · Cited by 711
Model-Based Fault Diagnosis Techniques: Design Schemes, Algorithms and Tools
Ding, S. X. (2013) · Advances in Industrial Control · doi:10.1007/978-1-4471-4799-2 · Cited by 667
Fault-tolerant control systems: A comparative study between active and passive approaches
Jiang, J., & Yu, X. (2012) · Annual Reviews in Control · doi:10.1016/j.arcontrol.2012.03.005 · Cited by 658
Riera-Guasp, M., Antonino-Daviu, J. A., & Capolino, G.-A. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2375853 · Cited by 573
(2002) · Elsevier eBooks · doi:10.1016/b978-0-12-402772-5.x5000-5 · Cited by 551
Thorsen, O. V., & Dalva, M. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.464536 · Cited by 344
A Survey of Methods for Detection of Stator-Related Faults in Induction Machines
Tallam, R. M., Lee, S. B., Stone, G. C., Kliman, G. B., Yoo, J., Habetler, T. G., & Harley, R. G. (2007) · IEEE Transactions on Industry Applications · doi:10.1109/tia.2007.900448 · Cited by 301
Fault-Tolerant Voltage-Fed PWM Inverter AC Motor Drive Systems
de Araujo Ribeiro, R. L., Jacobina, C. B., da Silva, E. R. C., & Lima, A. M. N. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.825284 · Cited by 299
Thorsen, O. V., & Dalva, M. (2002) · Proceedings of IEEE Petroleum and Chemical Industry Technical Conference (PCIC '94) · doi:10.1109/pcicon.1994.347637 · Cited by 264
Najafabadi, T. A., Salmasi, F. R., & Jabehdar-Maralani, P. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2055775 · Cited by 250
Drif, M., & Cardoso, A. J. M. (2014) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2014.2307013 · Cited by 235
Campos-Delgado, D. U., & Espinoza-Trejo, D. R. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2047829 · Cited by 224
Seshadrinath, J., Singh, B., & Panigrahi, B. K. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2257869 · Cited by 215
Easy and Fast Sensor Fault Detection and Isolation Algorithm for Electrical Drives
Berriri, H., Naouar, M. W., & Slama-Belkhodja, I. (2012) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2011.2140333 · Cited by 197
Neural networks application for induction motor faults diagnosis
Kowalski, C. T., & Orlowska-Kowalska, T. (2003) · Mathematics and Computers in Simulation · doi:10.1016/s0378-4754(03)00087-9 · Cited by 165
Self-citationDesign of a Fault-Tolerant Controller Based on Observers for a PMSM Drive
Akrad, A., Hilairet, M., & Diallo, D. (2011) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2010.2050756 · Cited by 155
Performance of diagnosis methods for IGBT open circuit faults in voltage source active rectifiers
Rothenhagen, K., & Fuchs, F. W. (2004) · 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551) · doi:10.1109/pesc.2004.1354769 · Cited by 141
HOS-based nonparametric and parametric methodologies for machine fault detection
Chow, T. W. S., & Tan, H. (2000) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.873213 · Cited by 88
Fault diagnosis scheme for open‐circuit faults in field‐oriented control induction motor drives
Espinoza‐Trejo, D. R., Campos‐Delgado, D. U., Bossio, G., Bárcenas, E., Hernández‐Díez, J. E., & Lugo‐Cordero, L. F. (2013) · IET Power Electronics · doi:10.1049/iet-pel.2012.0256 · Cited by 78
Singh, G. K., & Ahmed, S. (2003) · Electric Power Systems Research · doi:10.1016/s0378-7796(03)00154-8 · Cited by 75
Fault Tolerant Flight Control - A Survey
Verhaegen, M., Kanev, S., Hallouzi, R., Jones, C., Maciejowski, J., & Smail, H. (2010) · Lecture Notes in Control and Information Sciences · doi:10.1007/978-3-642-11690-2_2 · Cited by 65
Stator and Rotor Faults Monitoring of the Inverter-Fed Induction Motor Drive using State Estimators
Kowalski, C. T., Wierzbicki, R., & Wolkiewicz, M. (2013) · Automatika · doi:10.7305/automatika.54-3.167 · Cited by 39
Self-citationSensor Fault detection and fault tolerant control of induction motor drivers for electric vehicles
Fan, S., & Zou, J. (2012) · International Power Electronics and Motion Control Conference (IPEMC) · doi:10.1109/ipemc.2012.6259046 · Cited by 32
Improved MRAS‐type speed estimator for the sensorless induction motor drive
Orlowska‐Kowalska, T., & Dybkowski, M. (2007) · COMPEL The International Journal for Computation and Mathematics in Electrical and Electronic Engineering · doi:10.1108/03321640710756474 · Cited by 26
Self-citationWolkiewicz, M., & Kowalski, C. T. (2013) · Annual Conference of the IEEE Industrial Electronics Society (IECON) · doi:10.1109/iecon.2013.6700044 · Cited by 25
Self-citationRotor fault detector of the converter-fed induction motor based on RBF neural network
Kowalski, C. T., & Kamiński, M. (2014) · Bulletin of the Polish Academy of Sciences Technical Sciences · doi:10.2478/bpasts-2014-0008 · Cited by 24
Self-citationRotor Fault Analysis in the Sensorless Field Oriented Controlled Induction Motor Drive
Orłowska-Kowalska, T., Dybkowski, M., & Kowalski, C. T. (2010) · Automatika · doi:10.1080/00051144.2010.11828366 · Cited by 24
Self-citationA strategy to replace the damaged element for fault-tolerant induction motor drive
Rodriguez, M. A., Claudio, A., Theilliol, D., Vela, L. G., & Hernández-González, L. (2008) · International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE) · doi:10.1109/iceee.2008.4723458 · Cited by 16
A comparative analysis of the chosen speed sensor faults detectors for induction motor drives
Klimkowski, K., & Dybkowski, M. (2015) · International Conference on Electrical Drives and Power Electronics (EDPE) · doi:10.1109/edpe.2015.7325316 · Cited by 15
Self-citationA novel strategy to replace the damaged element for fault-tolerant induction motor drive
Rodriguez, M. A., Claudio, A., Theilliol, D., Vela, L. G., & Hernández-González, L. (2008) · IEEE International Power Electronics Congress (CIEP) · doi:10.1109/ciep.2008.4653825 · Cited by 9
Faults and Diagnosis Systems in Power Converters
Lee, K.-B., & Choi, U.-M. (2014) · Studies in Computational Intelligence · doi:10.1007/978-3-319-03401-0_4 · Cited by 6
Research works printed but not linked: 2
- Ding SX (2008) Model-based fault diagnosis techniques. Springer, Berlin
- Sobanski P, Orlowska-Kowalska T (2014) Low-cost fault-tolerant control scheme for SVM two-level voltage-inverter-fed induction motor drive. In: Proceedings of the 11th international conference ElectrIMACS, Valencia, 19–22 May 2014
Cited by
Fault Diagnosis and Fault-Tolerant Control of PMSM Drives–State of the Art and Future Challenges
Orlowska-Kowalska, T., Wolkiewicz, M., Pietrzak, P., Skowron, M., Ewert, P., Tarchala, G., Krzysztofiak, M., & Kowalski, C. T. (2022) · IEEE Access · doi:10.1109/access.2022.3180153 · Cited by 328
Self-citationImplementation of Digital Twins for electrical energy conversion systems in selected case studies
Rassõlkin, A., Orosz, T., Demidova, G., Kuts, V., Rjabtšikov, V., Vaimann, T., & Kallaste, A. (2021) · Proceedings of the Estonian Academy of Sciences · doi:10.3176/proc.2021.1.03 · Cited by 67
Dybkowski, M., & Klimkowski, K. (2019) · Sensors · doi:10.3390/s19030571 · Cited by 66
“The growing demand for increasingly reliable high performance installations, due to increased security regulations and a more competitive market [1,4,5], requires the implementation of effective diagnostic systems, such as Instrument Fault Detection and Identification (IFDI) [3,6], Fault Detection and Diagnosis (FDD)…”
BackgroundMethodSelf-citationSkowron, M., Wolkiewicz, M., Orłowska-Kowalska, T., & Kowalski, C. T. (2019) · Applied Sciences · doi:10.3390/app9040616 · Cited by 64
Self-citationAdamczyk, M., & Orłowska-Kowalska, T. (2019) · Sensors · doi:10.3390/s19224979 · Cited by 49
“A solution may be the introduction of software redundancy in the form of virtual sensors based on state variable estimators developed on the basis of the mathematical model of the motor [2,5,6].”
BackgroundSelf-citation
Metadata
- Authors
- Orłowska-Kowalska, T., Kowalski, C. T., & Dybkowski, M.
- Affiliations
- Wrocław University of Science and Technology (PL)
- Corresponding author
- Orłowska-Kowalska, Teresa
- Venue
- Studies in Systems, Decision and Control
- Publisher
- Springer International Publishing
- Published
- 2016-10-01
- Pages
- 101-120
- ISSN
- 2198-4182 (ISSN-L)
- 2198-4190
- OpenAlex
- W2525753573
- Cited by
- 21
- References
- 42
- Citations by year
- 2025: 1 · 2024: 2 · 2023: 4 · 2022: 4 · 2021: 2 · 2020: 1 · 2019: 6 · 2018: 1
- FWCI
- 5.56
- Type
- book chapter
- Language
- en
- Open access
- closed
- Locations
- Studies in systems, decision and control (publishedVersion)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Sensorless Control of Electric Motors
- Keywords
- fault diagnosis, fault-tolerant control, fault detection, data-driven methods, model-based approach, passive fault-tolerant control, active fault-tolerant control, electric drives, AC motor drives, industrial processes
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.